I need information and or a parts diagram on the rifle,
What I know is it is a S&W Model A in a 300 win mag. It was made by Husqvarna Vapenfabriks A B Sweden between 1969 and 1972. I read where 750 were made , that does not sound like much to me but maybe there was some problems with the contract between the 2 companys. I did not show a picture because the gun was customized with a fiber glass stock and some kind of coating that give it a blueish gray look. It has had trigger work and is set at 1.5 lbs, and my Gunsmith has the gun and i cannot get a picture right now.
The problem I'm having is I cannot remove the bolt without removing the trigger. My Gunsmith say's there is a part missing from the trigger that does not allow the hammer to drop down below the groove under the bolt that allows it to come out of the receiver. He has tried to make a pin with a spring to go where the part is missing but it makes the trigger pull very hard. If some one knows anything or has a diagram of this rifle it would help me .
Thanks,
The Mud Diver