Dave has the process nailed, except I do not thin the ALOX at all. I do put the plastic bottle in a hot water bath for a couple of minutes so that the ALOX will flow better. I put about 50 bullets in a butter tub and squirt a very small amount of ALOX over them. I then tumble the bullets until they are covered with a thin coat of ALOX. Start small as you can add more a lot easier than taking the excess away. Dump the bullets out onto waxed paper and let them dry overnight.

One other thing. The ALOX will tend to gum up your seating and crimping dies so plan on cleaning them after fifty or so rounds.

I hope that helps,

Frank

__________________
sona si latine loqueris .