Quote:
Originally Posted by BELT_FED
mike if you get some polishing compond and place it on your sear and hang on to your hammer and dry fire a few time you will be amazed at the difference... these rifle have very notchy triggers a lot of the weight is from the friction of those to surfaces... compound is cheap and and you can tell a very noticable difference..
|
oh i've polished my hammer and sear. my original 15 min trigger job was much better than the JP spring kit but my pins were walking because of how i bent the springs. because the receiver walls are thicker than on an AR i couldn't use anti-walk pins (unless i wanted to modify a set of KNS and i didn't). no big deal. i'll put another 1000 rounds through and remove the FCG for a good spring cleaning. it's all good.