View Single Post
 
Old 09-18-2011, 05:10 PM
5Wire's Avatar
5Wire 5Wire is offline
Member
 
Join Date: Jan 2003
Location: Portsmouth NH USA
Posts: 2,454
Likes: 1,723
Liked 1,576 Times in 626 Posts
Default

Quote:
Originally Posted by SpartanEagle View Post
I just pickup the BG38 and like it after only 50 shots thru it ... BUT ... at 8 yds, my laser is pointing off by at least 2" to right and 2" low... I can put all shots within 2" by using the regular sights but laser is useless ... I thought adjustment would be simple but the hex wrench that fits the laser attachment screw will NOT fit either the windage or elevation screws... is the same hex wrench supposed to fit all three screws or did I not get one of the tools ? And if so, does anyone know what size is the wrench supposed to be for these adjustment screws?
Appreciate the info...
There are two hex wrenches. One to remove the sight from the frame entirely, and then an itty bitty one (mine measures 0.028 inches or about 0.70 mm) for adjusting the sight. A little rotation goes a long way.

I tried to ID a Part Number at the S&W site but it's down.
__________________
Bob
Reply With Quote