Since I picked up buckets of range trash brass, I have lots of "Glocked" .40 brass. One day as I was sticking them rear-first into a .40 cartridge case to sort out the problem brass, I took a look at a Lee .40 FCD.
Stripped the guts out of the .40 FCD, shot the "Glocked" brass with some case lube, and started shoving the brass all the way through the die with the rod from a Lee bullet sizer, using an old Lee single press. I guess I cobbled together my own "Lee Bulge Buster."
No problems with the reloads in Sigma, Brn HP, or Glock 35, using Dillon dies on the Blue Press, and the brass prepped as above.
__________________
Science plus Art
Last edited by OKFC05; 11-17-2011 at 12:33 PM.
|