Quote:
Originally Posted by jeshoffstall
I posted earlier about FTE concerns with my Shield. One member suggested maybe I was getting too much pressure from the fully loaded magazine. So today, with an empty chamber and the safety on, I inserted a fully loaded magazine into the gun and pulled the slide back an inch or so...and it just stayed there.
If I loaded the mag minus one of full capacity, it would snap back into battery every time.
Is this by design? Seems like a full magazine may be slowing down my slide?
Thanks
|
My slide will not go back into battery after I pull back slide about one inch and release unless magazine is removed or inserted completely empty. (Slide would move forward but stop about 1/4 inch from battery when released at about one inch with any number of shells in magazine.)
I have never had any issues with my Shield and there have been posts regarding the slide not going completely into battery when you pull slide back slightly and release.
Russ