Quote:
Originally Posted by texanfan
Thanks for the quick reply! Barely had time to take the picture!
Yes, it is directly above the trigger return spring. I just noticed comparing it to the photo in the manual of that area that the pictur in the manual has a nice edge and no gouge. I also looked at my other pistols and they are nice and clean. Could just be bad casting as I dont see any oxidation although it looks almost like a pitted area. i doulble checked the bottom of the feed ramp and the spring and they have not a scratch. I also inspected the trigger area with a light and couldn't see any flakes or chunks in there.
I guess because mine looked so much different than the manual, I am concerned. At least I know there is at least one other owner who got a badly cast part.
|
That is the sprue mark from the injection molding process. Some will be a little bit in, some a little bit out. Some will be out with a small dip around it.