02-21-2017, 08:24 PM
|
Member
|
|
|
Join Date: Nov 2016
Posts: 3
Likes: 0
Liked 6 Times in 3 Posts
|
|
Starline .308 Case Neck Uniformity- 48 pieces of brass from my 178-179gr case weight bin were measured for case neck uniformity using a home brew neck gauge with a .0005” dial indicator
- My neck gauge is based on Chris Long’s design further described here:
Tools for Measuring Case Necks within AccurateShooter.com
- The 178-179gr weight bin was selected as it contained the average case weight from my earlier case weight study.
Results:- Average neck thickness is .0146”.
- Average neck thickness variation (max - min) = .001”
- Standard deviation of neck thickness variation = .000 6”
Conclusion: - I might continue to measure neck thickness and discard any pieces greater than .002”, which would have been just one piece in this 48 piece group. I will not pursue neck turning as my rifle’s chamber doesn’t require it.
|