Quote:
Originally Posted by Mike, SC Hunter
Chances are if you had tightened the main spring down all the way....Put a drop of oil or 2 on the internals and taken a .22 bore brush to the range all would have ended well........
.22 Smiths have tight chambers and .22's case of today are made somewhat thinner brass and .22's are dirty.....A cylinder scrub every few cylinders usually eases extraction.....BTW I have a 4" 617....never had a problem adhering to the above..........
|
i did check the screw it was all the way tightened. i also checked the key lock. i did not check the spring I did try a second ammo and only the misfires happened in DA shooting. could you tell me what kind of ammo you use
thank you