View Single Post
 
Old 07-11-2017, 10:28 PM
kbm6893 kbm6893 is offline
SWCA Member
 
Join Date: Apr 2007
Location: Pennsylvania
Posts: 6,634
Likes: 638
Liked 6,872 Times in 2,546 Posts
Default

Quote:
Originally Posted by sandog View Post
Reloading with out a chronograph is like driving a vehicle without any gauges that work. You might still get where you're wanting to go, but having that info at your fingertips might help you avoid a speeding ticket, an overheated engine, loss of oil, well you get the picture.
You can get a decent chronograph like the Chrony for less than $100.

Velocity alone is not an indication of pressure, but looking at the chronograph readout can tell you how consistent a load is, how fast a small increase in powder is affecting velocity, and when you should stop increasing a charge, instead of just the round "feels" when fired.

I'm not saying your loads are for sure underpowered or you should bump them up. Just one of the many possibilities.

One thing I do, to every pistol round I load, is to try each one in a Wilson or Clymer gauge. I have a gauge for each caliber I load for. If it doesn't drop in and out of the gauge, it's not going to work well in the pistol. You can do the same by removing your barrel and trying each round in it using the "plunk test".
Weird that you've fired 500 rounds of your loads without issue. Maybe something you did differently this time ?
L.E. Wilson Max Cartridge Ga 9mm Luger - MPN: PMG-9MM
Nothing different. I have a rediculously meticulous loading process. And I've done the plunk test. All good.

I just think this was one of those things. I'll keep shooting it and see if it
Repeats itself.
Reply With Quote
The Following User Likes This Post: