8-16-2017: filled the case feeder tubes, primer tray, powder measure and counted out 100-165 gr. Xtreme plated FP bullets and proceeded to load 100 rounds of 40 S&W ammo on Blazer brass cases. Had a slight issue with case feeder when tubes were full-first 3-4 pieces of brass would fall over onto side. So, I will need to make an adjustment at the case feeder. Otherwise, no other issues. Every primer seated correctly and no issues with the Auto Pro powder measure. Finished rounds checked fine in my Lyman gauge. As with the 9mm Pro 1000, C.O.L. was +/-.003-.004" from setting of 1.125" desired C.O.L. I sure wish Lee would update the Pro 1000 to a 4 station progressive, but for now it does an acceptable job of producing ammo with few issues.