View Single Post
 
Old 09-11-2017, 01:22 PM
iPac's Avatar
iPac iPac is offline
Member
 
Join Date: Mar 2015
Posts: 720
Likes: 813
Liked 775 Times in 330 Posts
Default

Quote:
Originally Posted by old&slow View Post
I agree with JBnTx. Made my baffle out of a piece of roof flashing
and a diagram I found on the internet.
My whole setup was purchased "used" and it was all RCBS equipment. The Uni-Flow was included.

Upon immediate research, I found the recommendation to use the baffle. Considering I didn't want to pay money for one, I also found the diagram online to make my own, and I also used a scrap piece of roof flashing/duct work flashing.

The baffle definitely helps with metering, as the weight of the powder affects it. By using the baffle, it keeps the powder uniform and metering perfect.

If I were you, I would make my own. Really simple. If you can't find the online diagram, I have it saved to my computer and can share the PDF with you.

My Uni-Flow is so accurate that I can load hundreds of rounds without checking the powder weight because it stays where set and consistently meters so well. I still check about every 50rds though, but every time it isn't needed.

Last edited by iPac; 09-11-2017 at 01:25 PM.
Reply With Quote
The Following 2 Users Like Post: