Quote:
Originally Posted by mmaher94087
Referencing the diagram in the Chicoine manual; when the cylinder was cleaned was the barrel of the Base Pin (#113) cleaned? Also, #125B and C should be cleaned and oiled. My bet is congealed oil or WD 40 could be causing the problem and not the spring.
Part #122D will unscrew from the Extractor Catch Pin (#122C). Be sure to place empty shells in the cylinder prior to unscrewing.
|
The manual had implied that #122D extractor rack nut and 122C extractor rack screw shouldn't be disassembled after leaving the factory, but knowing it can be done is half the battle. I got it apart and the spring was in bad shape. Now I will be looking for a replacement. Thanks very much for the help.