Thanks. Good suggestion. I went to their website and notice the case feeder are for different size shells.
Is there some type of conversion to go from .357 to 9mm, for example?
Quote:
Originally Posted by MrG5122
I see that the Essentials package does not include the case feeder. IMO the case feeder is what makes a 650/750 an efficiency machine.
I load 223 on my 650 in three stages:
1. Load up the case feeder and size/deprime. I have a separate tool head with only the sizing die installed.
2. Tumble cases and trim to length.
3. Install the tool head with the powder drop, bullet seater, and crimp die if you decide to use one. Fill the case feeder with polished and trimmed cases, and finish the reloading process.
The case feeder makes all this a breeze!
FWIW H335 meters like water in the 650.
|