I have posted this info so many types, Plated Bullets are not that difficult! There is no mystery
Bullet/Load Info
Load Info
Our Copper Plated Bullets can be run at mid-range jacketed velocities or higher end lead velocities. We recommend keeping velocities to less than 1500 FPS (Feet Per Second) and using only a light taper crimp
Any velocities over 1200 FPS we recommend either our Heavy Plate Concave Base or Hollow Point products for superior accuracy. We recommend keeping velocities to less than 1500 FPS (Feet Per Second) and using only a light taper crimp
FAQ - Berry's Manufacturing
Where can I find load data for your bullets?
Load data from any load manual or website can be used. Full-metal jacketed, lead bullet, or plated bullet load data can be used as long as the following standards are adhered to:
- The data contains the correct grain weight of bullet.
- Berry's max recommended velocity is not exceeded. (This info is displayed on bullet boxes and product webpages.)
- Standard Plate Bullets Max Velocity: 1,250 fps.
- Thick-Plate Bullets (TP) Max Velocity: 1,500 fps.
- Do not over-crimp the bullet. Crimping so tight that bullet deformation occurs, or plating is separated causing visible exposure of the lead core will cause tumbling, key-holing, and reduced accuracy.
Load data containing bullet descriptions such as Plated (P,) Berry's Bullet (BERB,) Total Metal Jacket (TMJ,) Copper Plated (CP,) or CPJ (Copper Plated Jacket,) refers to plated bullet data.
Cartridge Overall Lengths (COL) are found in the load data being used. DO NOT EXCEED SAAMI MAX COL SPECS.