Quote:
Originally Posted by armorer951
Check the end of the extractor rod and the front locking bolt for burrs. Also, the center pin should come forward completely flush with the end of the extractor rod (or just a few thousandths beyond flush) when the thumbpiece is fully depressed.
|
If all other things are found to be ok this^^^
I have a model 36 that was sticky tried all the normal checks. Turned out the rod was binding at the front a bit of file work with jewlers file and a fine stone cured the problem, as was mentioned above the center pin needs to be just above flush with the end of the rod at rest mine wasn't...