Quote:
Originally Posted by Chubbs103
.357 posed a bigger problem. I am using my RCBS dies from probably the late 1970s. The size die and the seating die require too precise an entry into the die for progressive use. I can rotate a single round through the stations without a problem, but if the shell plate is fully loaded I start crushing case mouths.
|
Did you follow this step?
"
Using the die lock rings provided, screw the sizing die
into the toolhead. Raise the platform and screw the die down
until it touches the shellplate. Lower the platform and insert
an empty case into Station One. Raise the platform so the
case is in the die, tighten the lock ring on the die. This will
keep everything centered."