View Single Post
 
Old 09-24-2021, 10:20 PM
LoboGunLeather's Avatar
LoboGunLeather LoboGunLeather is online now
US Veteran
 
Join Date: Nov 2008
Location: Colorado
Posts: 6,255
Likes: 12,001
Liked 25,039 Times in 4,346 Posts
Default

Quote:
Originally Posted by scattershot View Post
Seating the bullet deeper may solve your problem.
It could also make it worse. The case walls are tapered, thinner at the mouth and considerably thicker at the web and case head.

I'm thinking the basic problem is the 250-grain bullet, necessarily longer than anything considered "standard" in .45ACP, when seated to OAL that will function in the magazine and feed into the chamber the OP might be dealing with a bulged case well behind the case mouth area that could resist chambering fully.

If that is the case there are two possible solutions. One would be having the chamber reamed to provide additional clearance. The other would be inside neck reaming of the cases to allow deeper seating without bulging the case walls.
Reply With Quote
The Following 2 Users Like Post: