I load exactly the same for my 625 as I do for my 1911. Well, almost (always that exception).

I've found that federal brass is too thick to drop freely into the cylinder when loaded in full moon clips. Winchester and RP work fine.

I've also found that RP brass is so thin that it has insufficient neck tension to prevent bullet setback when loaded in my 1911.

So I use Federal brass in my 1911, RP brass in my 625 (where there is no bullet setback issues), and winchester works in both.

I have one set of dies that I use for both, so I use the same bullets, powder, primers, seating depth, and crimp for both.

I've used S&W and Wilson moon clips, both work fine. You will need a remooner/demooner tool to load/unload them.

__________________
Common sense isn't so common.