Numbers/Counts Updated: 11Jan2014 - I will double check them all again tonight
Trade Update:
N-RB Combats
44spl Cylinder for 44HE
K/L/N Rear Adjustable Sights
Okay guys I have counted up everything and have set prices, mainly from talking with people and from other online vintage part dealers. I have researched the parts to the best of my ability and have provided the best description that I can, if you have questions please let me know and will try to answer them.
Parts are all in used condition and they have been stored for better part of 30+ years so yes some have light surface rust, but I will look over each part as they go out to make sure that they are in good working order, and are not buggered up as far as screw slots. If you need a fully refinished part, I will be taking anything that has not sold and refinishing and hot salt blue all parts I have that came blue from factory. This will not be until Feb-Mar and I don't know how many parts will be left by then. These are being sold as refurbishable condition. Please ask questions im no expert at these parts.
Please use the PM function to contact me with what parts you need and quantity. I will also need your full name, address, email address and if possible phone number. and how you would like to pay. Right now I take USPS Money Order and Personal Check(I wait for it to clear). Ive tried to cover most shipping options but I know something always comes up so I will try and work with that, just ask. Im open to trades, right of the top of my head I could use a set of N-frame RB Combats (finger groove) grips, not the flat side ones, and a usable 44 special cylinder for a 44HE. Other stuff gets my attention just run it by me
Shipping: for most small parts im going to ship in a small padded envelope USPS and whatever is cheapest when go to send it at post office. To cover cost of shipping and shipping material im going to charge $3.00 -- For large order s please contact me and I will give you a quote also if you need special shipping(faster ext…) contact me.
I will try my best to keep numbers of parts left updated and you updated with information about your orders. Notice: I will be at SHOT Show from Jan 13th-18th and will be unable to ship parts out.
Flat Latches:
Flat Latch #1 $15.00ea - this is the earliest one I have ( 6 ) of these up for sale right now.
Flat Latch #2 $15.00ea - this is the middle on out of the three versions and I have ( Sold Out ) of these up for sale right now.
- I have 2 complete set of the three different versions im waiting to here back from people that posted interest in the order they posted or PM'd before I list them here. Once I hear back from them I will update the counts. I have already removed 2 from the #1 and #2 styles so counts are correct and do not include the 2 sets I have.
Screws:
Sideplate/Yoke Screw $3.00ea - 2 required for sideplate. domed head. I have ( 30 ) up for sale. Head Dia. .165” Length .345” Thread Dia. .125”
Sideplate Grip Screw $3.00ea - 1 required for sideplate. flat head to fit under grip. I have ( 7 ) up for sale. Head dia. .167” Length .268” Thread dia. .125”
Cylinder lock screw $3.00ea - this is for the early 4 screw pistols to retain the spring and pin for cylinder lock. I have ( 20 ) up for sale. Head dia. .195” Length .240” thread dia. .135”
Flat Latch Screw 4.00ea - This is the hollow base screw used to connect the flat latch to the bolt. I have ( 13 ) up for sale.
J Frame Internal Parts:
Flat Latch Bolt 12.00ea - This bolt is specific to the flat latch type assembly. I have ( 8 ) up for sale.
Rebound Slide w/pin $10.00ea - I have ( 15 ) of these up for sale.
Hammer block $4.00ea - I have ( 10 ) of these up for sale.
Cylinder Stop 8.00ea - this is NOT the offset type and they very well could be for 4 screw types as they do not have hole for spring to go into. please see photo. I have ( 15 ) of these up for sale.
Ejector Rod 8.00ea - I have looked at a large number of the ones I have and they all had RH threads this is for the 2" short barrel pistol (OAL 1.930"). I have cleaned these up and most of the surface rust came off, but still have honest wear. I have ( 9 ) of these up for sale.
Center Pin $6.00 - This is for the short 2" barrel (OAL 3.135"). I have ( 2 ) of these for sale.
Gas Ring $4.00ea – This is part of the cylinder ejector assembly. Please see drawing in photo as these could be early versons. They have two raised parts. I have ( 12 ) of these up for sale.
Gas Ring lock washer $3.00ea – this is part of the cylinder ejector assembly. Please see photo as these could be for only early J frame models. I have ( 12 ) of these up for sale.
Springs and pins - have a small lot of the springs and pins for the early J- Frame pistol. Please ask if you need any of these. I also have some other stuff that once I find out and research some more will post up.
Thanks
USNRigger
Vintage J-Frame Parts: Flat Latch, Bolts, Screws and most internal parts
Linear Mode
