Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >

Notices


Reply
 
Thread Tools Display Modes
  #1  
Old 07-14-2017, 01:05 AM
JDinAZ's Avatar
JDinAZ JDinAZ is offline
Member
S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION  
Join Date: Jul 2017
Location: AZ
Posts: 25
Likes: 5
Liked 40 Times in 9 Posts
Default S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION

Howdy everyone I'm J.D. in Arizona, just an old school Good ol' Boy from the woods in South East Ohio been in AZ a long while. Bear with me I'm a Machinist so my writing/composing skills don't hold the +/-.0005 that my parts do coming off the machinery.

I update this thing every couple days so check back there's more things in the mix.

I manufacture a different style S&W lock delete part set here in AZ, this is what I do for a living full time so I'm always here to support you. PM, email, phone call, text anytime. My voicemail is always full so if I don't answer drop me a text at 480-305-3236 soon as I get my hands free I'll get back to you.

We are not allowed to respond to questions in the classifieds so use my contact info below or PM me.


My KLN slug part set started when I pulled the internal lock out of my 329PD carry gun and went looking for a Titanium set to fill the hole, I couldn't find a TI set anywhere so I developed an Interlocking Slug and Retainer set for my carry gun that uses the factory spring and made them available for everyone in Titanium, Stainless, and Ordnance Steel. Packaged in an industrial duty ziplock so you have somewhere to store the factory lock parts, if you need to send your gun in for service from what I'm told just put them back in your gun and send it off for warranty work at Smith & Wesson. Just like pullin the chip out of your truck before you go to the dealership I guess.

Marine Corps Veteran Owned and Operated

Manufactured in Arizona

Small private shop not a Chinese widget factory and never will be

I do all the metal finishing and packaging myself by hand each part is 100% inspected. If I won't put it in my gun it goes in the scrap bin. See a message below from Dave O'Meara he is gun writer Doc O'Meara's son, been around a while in the gun world you can say.

Patent Pending part set fits K, L, N frames ( J frame and X frames prototypes are machined they came out great )

Machined from solid stock in Titanium, Stainless, Ordnance Steel

My current setup I can run about 6000+ part sets a month when I need to. Individual orders ship same day or next business day once funds clear. Mass volume orders may have a little lead time. If I need to run more parts than that I'll put more machinery in line not a problem


The J and X will be the same materials and same prices.
Probably a couple weeks out for delivery. The packaging will be a little different. Front will say S&W REVOLVERS where it says KLN , back the only thing that changed is all 3 frame sizes (KLN J X yep 5 but whatever) and all 12 models I do will be on there not just one frame with 4 models. These first ones for J and X will be small runs. You can preorder to lock yours in but don't send me any money yet we'll deal with that when they are ready to ship. Email and tell me what Slugs you want or hit my site and go to the orders page fill it in and in comments tell me what Slugs you want. parts@originalprecision.com S&W Lock Plug - ORIGINAL PRECISION


Pricing:

Titanium Matte part set KLN-TI-MAT $39

Ordnance Steel Black (Norrell Molyresin) part set KLN-ORD-BLK $44

Stainless Satin part set KLN-SS-SAT $39

Stainless Polished part set KLN-SS-POL $44
(reflection on head in pic is the lands and grooves on the side of my finger)

There's a $6 dollar flat shipping on each order. I pay $7.15 at the Post Office to ship the parts in a small priority mail box. It has 50 bucks insurance and I send you a tracking number.

If you're not sure which one you need for your gun especially Stainless ones you can email me a picture of your gun or guns with model number (no serial number pics) to parts@originalprecision.com and I'll check it out then send you a link to buy the one or ones you need. I just found out that a couple guys ordered Satin Stainless but need Polished Stainless. These have already been installed so I can't take em back on exchange. For these few I am sending them a new Polished Stainless set at no charge to them whatsoever. After I send these couple out I won't be replacing for free like that in the future. So be safe and send me picture to make sure you get the right one if you're not sure I'd rather me take the time to check it so you get the right ones. If you do go ahead and order and it's the wrong finish no problem just don't install it and call me we'll work out getting it exchanged so you have the right one it'll just cost you shipping both ways on the exchange.


Order a few different ways, whatever works easier for you it's all the same to me. I don't do checks or cards directly that way I never have your account or card numbers so don't send those to me.

PayPal or Debit / Credit cards with the buy now buttons on my site. Easiest way two clicks from here and you're filling in your info.
S&W Lock Plug - ORIGINAL PRECISION

Mail a money order and include a paper with what parts you want and ship to address. Include 6 bucks shipping, make money orders out to:
J. Winland
P.O. Box 1755
Queen Creek
AZ 85142

Send PayPal payment to azsaiga12@gmail.com let me know which part set or sets you want and your ship to address, don't forget to add the 6 bucks shipping to the Slug part set total

Call or text me at 480-305-3236 or email parts@originalprecision.com and I'll send you a PayPal link



I don't check the laws in your area so you should know what they are and if they apply to this item, when you buy parts you are stating that you are allowed to have this item in your area (I don't like that part either but it keeps me out of hot water, you know how it goes).


MESSAGES FROM FOLKS ABOUT MY PARTS
I APPRECIATE IT


This is a message I received from Dave O'Meara in Arizona after he had a chance to install the KLN-ORD-BLK part set he bought from me for his new 329PD. Side note, Dave's father is the world renowned gun writer Doc O'Meara.

----------------------------------------

"I just wanted to let you know that I installed your plug and it looks fantastic! I'm really sold on this product just wish there was a way you could set up customers being able to leave a review. If you set that up on your account you'll get 5 stars from me. Thank you and I hope you did very well at the show." Dave O'Meara

------------------------------------------------------------------------

John in Yuma a member here had this to say.
Ordered one for my 629-6 on Sunday. It arrived in today's (Tuesday) mail. Installed in about 30 minutes. The most time consuming part was stopping the bleeding.
Only one point worth mentioning. Your video shows the removal of the slug and its re-installation. The removal of the lock may be a bit more involved. There are two notches for the tool to engage the stock retainer and they are covered by the lock's eccentric plate. The notches are not in line with the retainer's straight spring extension, making pushing the spring more of a challenge. A small "glasses" screwdriver worked around the lower edge of the lock's retainer did the trick. After that, all was as advertised. Thanx.

------------------------------------------

Just got this one from a man named LP I think he's a member here
JD-

Just put the TI-MAT in the 329, went in - no sweat - even with my 74 year old arthritic fingers.

Just ordered ORD-BLK- for the 329 Night Guard - (NG)

Thank you for a heck of a nice product! -LP

--------------------------------------------------

INSTALL NOTES from J.D.
When you put your parts in once they are in and the Retainer is snapped in place just push on the Slug from the back side to flush it with the outside of the frame. It will stay there held by spring tension. That's how I install mine. There's only a couple thousandths tolerance between the milled retainer channel and the thickness of my retainer. Had to be that way to make sure it would clear in all frames and won't bind when you compress the retainer and spring to get them to snap into the Slug. And also won't bind if you're pullin the Lock Delete out and puttin it back in to do a detail cleaning after shootin when there's crud in the retainer channel. If I made the Slug any taller it would stick out of the frame when you push on the back from the inside. When I engineered this part set I also reduced the heel of the Slug to make sure it can't get in the way of the hammer. This was all done before I released my Lock Delete kit for everyone. Note that some of frames have a very flat face at the edge of the hole, some have small bevel in the face at the edge of the hole, the dimensions I use let you flush out to the face for non beveled frame holes and you can push it back a bit for beveled frame holes.

If the Slug finish looks different than your frame just oil the gun like you normally do. I oil all parts with CLP before they go in the mini bags. The difference in how oily the Slug is vs how oily your gun is can make the finish look a little different. Oiling the gun after install evens out the oil on the Slug and the frame. This comes into play for some of my Slugs. Makes a night and day difference with Black Slugs and Satin Stainless slugs. My black 329 frame is two different colors depending on if I oiled it lately, black-greyish when not oiled, richer black when oiled.


HERE'S MY 329 WITH A TI LOCK DELETE PART SET INSTALLED
I'll put other pics below these as I get them
















HERE'S A SATIN SLUG IN A POLISHED GUN
This gives you a good idea which Stainless Slug to buy for your gun if its shiny go with Polished unless you like the contrast then go with Satin. This one looks good with Satin. Your gun your call. This is also a great pic for you to see the bevel on the face of the frame I talked about earlier. See how this one is pushed back a touch, looks good this way, pushed outboard you'd see the edges of the slug and it would almost look like it was sticking out past the frame.




J FRAME AND X FRAME PROTOTYPES
They fit well. This is not my standard metal finishes. The metal finish I did on these doesn't match the TI cylinder, to match it buy a TI-MAT part set. These are only prototypes. Both men tore down their own guns and put the parts in.






John Ross Performance Center 500 one of 500 made. 250 this color 250 in a black. KLN-SS-SAT slug held from back to double check color match. Its there all day long. This belongs to a man that lives down the road from me. Retired Chicago PD did the Smith & Wesson school to work on department guns and damn good dude.




Ross Performance Center 500 SS-SAT Slug in daylight. This is a KLN part I'm holding from the back in the hole




Ross Performance Center 500. Man that owns this gun wanted me to point out that the hole was ragged when he got it, said it makes my part look ragged but its not.

Attached Thumbnails
S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION-kln-ss-pol-face-jpg   S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION-kln-ss-pol-back-jpg   S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION-slug-isos-jpg   S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION-img_20170517_122834413-slug-1-jpg   S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION-img_20170517_113135222_hdr-jpg  

__________________
R/S
J.D.

Last edited by JDinAZ; 07-26-2017 at 11:39 PM. Reason: update info
Reply With Quote
  #2  
Old 07-17-2017, 08:54 AM
JDinAZ's Avatar
JDinAZ JDinAZ is offline
Member
S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION  
Join Date: Jul 2017
Location: AZ
Posts: 25
Likes: 5
Liked 40 Times in 9 Posts
Default

To the top
__________________
R/S
J.D.
Reply With Quote
  #3  
Old 07-18-2017, 06:48 PM
JDinAZ's Avatar
JDinAZ JDinAZ is offline
Member
S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION  
Join Date: Jul 2017
Location: AZ
Posts: 25
Likes: 5
Liked 40 Times in 9 Posts
Default

To the top
__________________
R/S
J.D.
Reply With Quote
  #4  
Old 07-19-2017, 06:14 PM
JDinAZ's Avatar
JDinAZ JDinAZ is offline
Member
S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION  
Join Date: Jul 2017
Location: AZ
Posts: 25
Likes: 5
Liked 40 Times in 9 Posts
Default

to the top
__________________
R/S
J.D.
Reply With Quote
  #5  
Old 07-20-2017, 04:30 PM
JDinAZ's Avatar
JDinAZ JDinAZ is offline
Member
S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION  
Join Date: Jul 2017
Location: AZ
Posts: 25
Likes: 5
Liked 40 Times in 9 Posts
Default

to the top
__________________
R/S
J.D.
Reply With Quote
  #6  
Old 07-22-2017, 09:13 AM
JDinAZ's Avatar
JDinAZ JDinAZ is offline
Member
S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION  
Join Date: Jul 2017
Location: AZ
Posts: 25
Likes: 5
Liked 40 Times in 9 Posts
Default

to the top
__________________
R/S
J.D.
Reply With Quote
  #7  
Old 07-24-2017, 06:16 PM
JDinAZ's Avatar
JDinAZ JDinAZ is offline
Member
S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION  
Join Date: Jul 2017
Location: AZ
Posts: 25
Likes: 5
Liked 40 Times in 9 Posts
Default

to the top

uploading more pictures today
__________________
R/S
J.D.
Reply With Quote
  #8  
Old 07-27-2017, 04:46 PM
JDinAZ's Avatar
JDinAZ JDinAZ is offline
Member
S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION  
Join Date: Jul 2017
Location: AZ
Posts: 25
Likes: 5
Liked 40 Times in 9 Posts
Default

to the top
__________________
R/S
J.D.
Reply With Quote
  #9  
Old Yesterday, 07:48 PM
JDinAZ's Avatar
JDinAZ JDinAZ is offline
Member
S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION S&W LOCK DELETE PLUG on hand DIFFERENT STYLE Made in Arizona by ORIGINAL PRECISION  
Join Date: Jul 2017
Location: AZ
Posts: 25
Likes: 5
Liked 40 Times in 9 Posts
Default

to the top
__________________
R/S
J.D.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Key lock hole plugs? Grey Bearded One S&W Revolvers: 1980 to the Present 18 10-09-2015 01:42 PM
WTS: Non-original K frame target style stocks $38 wrhk33 Accessories/Misc - For Sale or Trade 0 07-19-2015 02:34 AM
Gun buy back programs, Arizona style LoboGunLeather 2nd Amendment Forum 6 05-05-2013 07:34 PM
Original style stocks got2hav1 S&W Revolvers: 1980 to the Present 6 03-30-2013 07:11 PM
WTB S&W original hard rubber or wooden 1905 style round butt grips. tac803 WANTED to Buy 3 03-06-2009 07:28 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 07:41 AM.


S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)