Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >

Notices


Reply
 
Thread Tools Display Modes
  #1  
Old 08-10-2017, 04:54 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20  
Join Date: Feb 2005
Location: Fort Lauderdale, Florida
Posts: 5,920
Likes: 296
Liked 7,150 Times in 2,297 Posts
Wink FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20

Here is a New Old Stock, never installed, 10 5/8" Model 29 Silhouette barrel. I will also include the correct rear sight assembly (.196")

This will allow you to build a post Endurance Package model 29




$400 shipped to any point in CONUS

All Forum Rules Apply

Last edited by colt_saa; Yesterday at 12:54 AM.
Reply With Quote
The Following User Likes This Post:
  #2  
Old 08-18-2017, 11:26 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20  
Join Date: Feb 2005
Location: Fort Lauderdale, Florida
Posts: 5,920
Likes: 296
Liked 7,150 Times in 2,297 Posts
Default

Back to the top
Reply With Quote
  #3  
Old 08-27-2017, 04:27 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20  
Join Date: Feb 2005
Location: Fort Lauderdale, Florida
Posts: 5,920
Likes: 296
Liked 7,150 Times in 2,297 Posts
Default

Here is a New Old Stock, never installed, 4" GIGN barrel for the 586




$250 shipped to any point in CONUS

All Forum Rules Apply

Last edited by colt_saa; 08-27-2017 at 04:32 PM.
Reply With Quote
  #4  
Old 09-23-2017, 01:52 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20  
Join Date: Feb 2005
Location: Fort Lauderdale, Florida
Posts: 5,920
Likes: 296
Liked 7,150 Times in 2,297 Posts
Default

two GIGN barrels have been sold, only the Model 29 barrel still remains available.

Last edited by colt_saa; 09-25-2017 at 03:08 PM.
Reply With Quote
  #5  
Old 09-30-2017, 05:56 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20  
Join Date: Feb 2005
Location: Fort Lauderdale, Florida
Posts: 5,920
Likes: 296
Liked 7,150 Times in 2,297 Posts
Default

Berry's Plated Bullets

I have 4 boxes of .40/10MM plated 155 TC projectiles that I will sell for $35 per box plus shipping or $130 shipped for all 4 boxes to any point in CONUS







I have 5 boxes of .45 plated 200 HP projectiles that I will sell for $38 per box plus shipping or $180 shipped for all 5 boxes to any point in CONUS






I also have a supply of .357 125 grain JSPs from Israeli Military Industries. These are super quality JACKETED (not plated) projectiles that I have been using in my Smith and Wesson revolvers and my various Lever Action rifles for decades.


I will sell these for $15 per hundred plus shipping. 4,500 3,500 are available and I will do better on larger quantities

Last edited by colt_saa; 10-06-2017 at 08:42 PM.
Reply With Quote
  #6  
Old 10-04-2017, 08:47 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20  
Join Date: Feb 2005
Location: Fort Lauderdale, Florida
Posts: 5,920
Likes: 296
Liked 7,150 Times in 2,297 Posts
Default

Here are some hard to find barrels and cylinders

First is a New Old Stock 6" barrel from a 125th Anniversary Model 25. This barrel has never been installed on a firearm and has remained wrapped in the VOC paper all these decades




The price is $150 shipped to any point in CONUS



This next barrel is a factory original 3" barrel for the 940 revolver. This is New Old Stock and has never been mounted on a firearm




If you are planning a J-frame conversion or just want one of the hard to locate 3" 940s, this could be the way to go.

The price is $180 shipped to any point in CONUS



Here is an original 8 shot 357 Magnum cylnder from a Model 327 NightGuard. This is New Old Stock and has never been mounted on a firearm or modified in any manner. It is a complete assembly including the Extractor






The price is $175 shipped to any point in CONUS



Here is an original 6 shot Titanium 41 Magnum cylinder from a Model 357PD. This is New Old Stock and has never been mounted on a firearm or modified in any manner. It is a complete assembly including the Extractor






The price is $150 shipped to any point in CONUS
Reply With Quote
  #7  
Old 10-05-2017, 03:53 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20  
Join Date: Feb 2005
Location: Fort Lauderdale, Florida
Posts: 5,920
Likes: 296
Liked 7,150 Times in 2,297 Posts
Default

These are all hand made custom knives

First up is this great hand made custom Tank "PROTOTYPE" flipper from Allen Elishewitz. This is the second prototype of this knife

This knife is a liner lock with beautiful burl handles and a pocket clip and anodized titanium bolsters.

The blade is 3 3/4" long and the knife has an overall open length of 8 3/4"





This knife is $825 shipped to any point in CONUS



Next is a great hand made custom Damascus knife from Allen Elishewitz.

This knife is a button lock with black handles, a pocket clip and stunning Damascus blade.

The blade is 4" long and the knife has an overall open length of 9"







This knife is $1050 shipped to any point in CONUS



Next is another hand made custom knife from Allen Elishewitz.

This knife is a button lock with black handles, a pocket clip and stunning Gary House Damascus bolsters.

The blade is 4" long and the knife has an overall open length of 9"







This knife is $1050 shipped to any point in CONUS



This is a hand made custom folder from Allen Elishewitz.

This knife is a liner lock with black handles, pocket clip and Timascus bolsters.

The blade is 4" long and the knife has an overall open length of 9"









This knife is $1050 shipped to any point in CONUS



Yes, another hand made custom Damascus folder from Allen Elishewitz. This is my favorite of the Elishewitz folders

This knife is a frame lock with unusual black machined carbon fiber handles, a pocket clip and stunning Damascus blade.

The blade is 3 7/8" long and the knife has an overall open length of 8 1/2"









This knife is $1050 shipped to any point in CONUS



This is a cool looking hand made custom flipper from Mikkel Willumsen located in Copenhagen, Denmark

This knife is a frame lock with beautiful orange/white/black G10 and machined Titamium handles plus a pocket clip

The blade is 4 3/8" long and the knife has an overall open length of 9 5/8"









This knife is $895 shipped to any point in CONUS . . . SPF



The stunning hand made custom lock-back auto is from Jerry Rados and features Exhibition grade Black Lip scales. Jerry's Turkish Twist Damascus is simply spectacular. His file work is outstanding, it is almost impossible to see where the lock back is located along the spine of the knife









This knife is $4,000 shipped to any point in CONUS



This is a hand made custom Damascus folding dagger from André Anderson

André Andersson is an award winning craftsman from the north of Sweden who makes sharp art inspired by old Norse mythology and modern design

This knife is a liner lock with unusual multi-piece file worked stainless and Damascus handles and a stunning Damascus blade.

The blade is 3 1/2" long and the knife has an overall open length of 8"











This knife is $4,750 shipped to any point in CONUS

Last edited by colt_saa; 10-10-2017 at 01:13 PM.
Reply With Quote
The Following 3 Users Like Post:
  #8  
Old 10-17-2017, 11:56 AM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20  
Join Date: Feb 2005
Location: Fort Lauderdale, Florida
Posts: 5,920
Likes: 296
Liked 7,150 Times in 2,297 Posts
Default

Here are two more hand made custom flippers from Mikkel Willumsen located in Copenhagen, Denmark

One has a black textured and machined G10 handle while the other is green/black machined G10



These knives are of the frame lock design and share a very unusual pattern to the blade's steel

The blades are 3 1/4" long and the knives have an overall open length of 8 1/2"








Either one is $850 shipped to any point in CONUS.

Last edited by colt_saa; 10-19-2017 at 02:43 PM. Reason: clarification
Reply With Quote
  #9  
Old 10-18-2017, 07:32 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20  
Join Date: Feb 2005
Location: Fort Lauderdale, Florida
Posts: 5,920
Likes: 296
Liked 7,150 Times in 2,297 Posts
Default

These are .355 diamater 102 grain Brass Jacketed Hollow Point projectiles manufactured by Remington.

These are in packages of 100 projectiles


$19.50 per package plus shipping. 9 packages of 100 are available



These are .452 diameter 160 grain solid copper Hollow Points. These are officially blems

These are great in the 45ACP. 45GAP, 45SUPER and other cartridges that use the .452 projectile


These are packaged in bags of 50 pieces. $28 per package plus shipping. Many packages are available



In 2005 I was asked to come up with an Official knife for the Florida Highway Patrol.

I worked with Beretta since they were the provider of the Patrol's current and previous issue handguns.

This knife is of the liner lock design and has laser etched Florida Highway Patrol Patch plus a removable pocket clip

The knife blade is of the Tanto shape but half serrated to aid in rapidly cutting seat belts

Black was chosen as the finish of the knife and blade

There are Teflon washers placed between the blade and the bolsters. The pivot point of the knife does not need oil

The blade is 3 7/8" long and the knife has an overall open length of 8 3/4"

These knives could only be ordered from Beretta by the Florida Highway Patrol Academy or the Florida Highway Patrol store.








As a result of this collaboration Beretta created the Law Enforcement Knife program with the Florida Highway Patrol knife as the cover photo


In 2006 the first knives were offered for sale in the Florida Highway Patrol Store.

Beretta discontinued this program and these knives have not been available for many years

This knife is New, Never Used, in it's original packaging

This knife is $250 shipped to any point in CONUS

Last edited by colt_saa; 10-18-2017 at 07:39 PM.
Reply With Quote
  #10  
Old Yesterday, 12:54 AM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20 FS: Barrels, Cylinders, Knives, Bullets - Updated 10/20  
Join Date: Feb 2005
Location: Fort Lauderdale, Florida
Posts: 5,920
Likes: 296
Liked 7,150 Times in 2,297 Posts
Default

This beautiful art dagger is made by world renowned filigree master Zaza Revishilli

The handle and scabbard both feature immaculate jewelry work with sterling silver and grade A garnets. A combination of high grade materials and masterful workmanship make this custom knife unique in quality and beauty.

The knife is supplied in a fitted presentation case that looks as good closed as it does open

The blade is 7 1/2" long and the knife has an overall open length of 13"










This piece is $7,500 shipped to any point in CONUS



I have some 160 grain .452 solid copper Hollow Point projectiles. These are BLEMs


I priced these about 1/3 off the Midway price . . . $.50 per bullet, plus shipping. Many hundreds are available


The same projectile in a 185 grain copper Hollow Point BLEM is availble at $.55 each plus shipping


Only a few hundred of the 185s remain

Either of these solid copper Hollow Points can be hand loaded into any cartridge that utilizes .452 projectiles. I find them fantastic in the 45 SUPER. Almost wish I had a 460 Rowland auto-loader to give them a try in

Obviously I will mix/match/combine any and all items to get the best possible shipping rate
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: early S&W 3 1/2" model 27 barrel, 4" m29 barrel & N PC diamond magna stocks bbtrout WANTED to Buy 1 11-03-2016 01:29 PM
The 3.25" model 66-5. The only factory 3.25 barrel? With barrel profile comparisons. Allen-frame S&W Revolvers: 1980 to the Present 12 11-19-2015 07:36 PM
WTS/WTT: Model 41, 5" (Field) Barrel for Early 5-1/2" Barrel mrringo Accessories/Misc - For Sale or Trade 1 06-29-2013 05:45 AM
FOUND - Lock: S&W Model 657 5" or 6" barrel - barrel only nipster WANTED to Buy 0 07-09-2012 01:02 PM
WTB S&W model 41 5.5" heavy barrel or Clark Optics Barrel davo WANTED to Buy 1 02-23-2012 11:17 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 09:54 AM.


© S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)