Time to shut this ad down. I am going out of town next week (fishing trip with my sons) so I won't be able to handle any transactions for a while. Thanks to all the good buyers!
I have tried to upload photos to show what is in this batch of parts, but it just isn't practical to show close images of each piece. This is a nice large bunch of vintage S&W revolver parts, mostly from the 1960's to mid-1980's, a few earlier pieces (hammers, triggers), some grips, hammers (target, service styles), triggers (target, service styles), trigger return slides, cylinder release thumbpieces w/screws, firing pins, firing pin rivets, hands, springs sideplate screws, and other goodies.
If you have an older S&W revolver that needs some help, maybe one that Bubba got hold of and worked on, there could be something here for you.
Here is a list, as complete as I can make it:
TRIGGERS: K,L, N frames (NOTE: some have cylinder hand, some do not. If you need the cylinder hand let me know and I will include one until there are no more to send. 04/23/20 all cylinder hands are gone.)
Target .500" grooved. 1-VG-EXC $65.00, 1-Good $50.00<<BOTH SOLD>>
Target approx. .380 width grooved. 2-VG-EXC $60.00 each
Target .500" smooth with threaded hole for stop screw. 2-Good $35.00 each<<BOTH SOLD>>
Service, standard narrow, grooved. 6-VG-EXC $25.00 each<<5 SOLD, 1 LEFT>>. 2-Good $20.00 each<<BOTH SOLD>>.
1980's-style, narrow smooth. 1-VG-EXC $30.00<<SOLD>>
HAMMERS: K frames (modern pre-lock) (NOTE: most have firing pin, sear hand installed, and mainspring link & pin, a few do not. Advise your needs and I will send what I have until they are all gone).
Target .500" checkered. 1-EXC $65.00<<SOLD>>
Beavertail thumb-piece (not target, but wider than service-style). 1-VG $40.00.
Service style, narrow checkered. 4-VG to EXC $25.00 each. 1-Good $20.00<<SOLD>>.
Bobbed (no thumb-tab). 2-good. $20.00 each<<BOTH SOLD>>.
HAMMERS, M&P (rounded checkered thumb piece):
Later production (modern-style sear hand). 3-VG $35.00 each. 1-Good $25.00<<SOLD>>.
Earlier production, with correct sear hand installed. 1-Good. $35.00.>>SOLD<<
HAMMER, J-frame:
Standard service style. 1-VG $30.00.<<SOLD>>
CYLINDER LATCH PARTS:
Cylinder latch bar (internal, rides in the frame). 1-Good. $25.00.
Cylinder latch thumb-release with screw (external, operated by user's thumb to release cylinder). 6 sets, VG-EXC $12 each.<<3 SOLD, 3 LEFT>>
TRIGGER RETURN SLIDE (internal, returns trigger to full-forward position):
Slide with spring, 2-VG $12.00 each <<ONE SOLD, ONE LEFT>>
Slide, no spring, 1-Good $6.00.
SAFETY BAR (blocks hammer from frame recess unless trigger is fully pulled and held during hammer fall).
Safety bar, 2-VG. $5.00 each.<<BOTH SOLD>>
SIDEPLATE SCREWS (3-screw K-frames, blued, used and some show screwdriver marks).
Set of 3, 1 flat-head, 2 crown-head. 2-sets Good, $8.00 per set.<<BOTH SOLD>>
MAINSPRING (powers the hammer, flat spring contained in the grip-frame):
8, VG condition. $5.00 each.<<ALL SOLD>>
GRIPS:
M&P (K-frame) square-butt, walnut, diamond pattern w/screw. Worn, good serviceable condition. $45.00.<<SOLD>>
K-frame square-butt, walnut, checkered, rounded lower edge (as seen on Model 10, 12, 13, 64, 65, etc, latter-1960's to mid-1980's). EXC, $40.00.
J-frame round-butt, walnut, diamond pattern, w/screw. Good-VG. $60.00.
ADDED 04/24/20 (not shown in photos):
Grips, K or L-frame square butt factory target, goncalco alves, checkered, early to mid 1980's type, with screw. Excellent condition. $60.00<<SOLD>>
Grips, K or L-frame square butt, Hogue Mono-Grip, black rubber with screw and fastener. Good condition. $20.00.
Grips, K or L-frame square butt, Combat Style rosewood (not factory, but closely following the factory style) with screw. Very Good condition. $35.00.
ODDS & ENDS ADDED 04/25/20:
1-Ruger 10/22 factory 10-round magazine, good condition. $10.00.
2-boxes (40 rounds) Remington Core-Lokt .300 Savage 180-grain soft points. $45.00 for both (will take about $14.00 for shipping costs).
There might be a few other things turn up around here! Stay tuned.
MISCELLANEOUS SMALL PARTS: I have dozens of items including firing pins, firing pin rivets, cylinder lock bolts, hammer-mount sear hands (J and K-frames), small springs, and a few various pins and screws. Let me know your needs and I'll try to match something up for you.
To buy, enter an I'LL TAKE IT with your selection and send a PM to me. First come first served, based upon time of PM's to my In Box. Most items can be sent in a small padded mailing pouch for $4.00, multiple items may require a little more for delivery. Payment by personal check, money order, or PayPal (I'll provide instructions on confirmed orders).
NO GUARANTEES AND NO WARRANTIES. These are USED parts, some may require skilled fitting. My descriptions are based only on visual inspection, nothing has been tested for fit or function. When you receive an order, inspect it right away and notify me ON THE SAME DAY that you do not agree with my item description, then return for refund (less postage).
I may entertain offers for multiple item lot purchases.
I will try to update this post every day as best I can. Please bear with me as I get this little chore done!
Vintage S&W Revolver Parts! WITHDRAWN please close
Linear Mode
