Follow forum rules and post "I'll take it" in this thread along with the leading item # and description of the item, then send me a PM.
I will ship via USPS Priority Mail flat rate. That means if possible, I will pack securely in the smallest $8.30 to save you shipping cost. Buy multiples and I will pack together as best I can... next size up in box is $15.05 and then the largest box is $21.10.
Payment is postal money order or personal check if you are well established on this forum for a few years.
Sorry, I won't support anti-gun PayPal.
If you need a different angle on a picture -AND- you will accept txt message on your phone then send me a PM and be clear about which pics you need, I will do all I can to help you identify any item.
Prices are firm, I tried to price them right. Buy multiples to save shipping but no other discounts, sorry.
Also note: I might be long winded. Apologies. My goal is to be comprehensive. If you need more info about anything, please feel free to ask. Can't guarantee that I have the answer, but I will certainly try.
15/Nov/2020 newly added:
Component bullets for reloading
#1
.45cal Laser Cast 200gr, LSWC .452" $30 SOLD
I believe that these are no longer in production but Midway has a page for them with many dozens of reviews. This is an open box that I bought probably 20 years ago. There are
386 bullets in this box.
#2
.40cal/10mm Speer #4402 180gr TMJ-FN two available
$18ea SOLD
New sealed black plastic box with the familiar yellow packaging, google the "Speer 4402" for the exact product. Each box has 100 bullets. There are two of these available.
#3
38/357 Hornady XTP 125gr JHP $18 SOLD
New sealed box, the very familiar Hornady red cardboard and search "Hornady 35710" to see the exact product. This box has 100 bullets.
#4
9mm 115gr JHP Sierra Sports Master $20 SOLD
New box but I did open this one to get a look at these slugs as Sierra makes top shelf bullets. While I had it open, I made sure to count them and Sierra dropped an extra one in so you get 101 bullets in this box! Google "Sierra 8110" to see this product.
^^Shipping on the above bullets^^
The Laser Cast can fit in a USPS Priority Flat Rate for $8.30 but not with anything else. The Speer .40's and the Sierra 9mm can fit in the $8.30 box. I can make the Hornady XTP's fit but it literally makes the small box -BULGE-. This would be your call as I would guess the pretty red Hornady box will get squished a bit. I would be happy to open the Hornady box and safely ship the bullets and send you the flattened Hornady box if you like.
Other gun stuff you might want or need
#5
ATI M010600 Mosin Nagant Scope Mount & Bolt Handle $20
If you google up ATI and that number you can find evidence of this all over the internet but it may no longer be in production or offered. Original price seems to run from $48-$60. This is new and all parts are here including drill, tap, bolt handle, scope rail and other hardware and the instructions. This
CAN fit in the small flat rate Priority box for $8.30 shipping but I have to remove it from it's original packaging to make that happen. Your call.
#6
Comp-Tac Minotaur hybrid leather/kydex IWB for Glock 29/30 $25
I don't think Comp-Tac offers the Minotaur series anymore or maybe they have a different name, not sure. I used this holster for a good bit and it's a quality IWB that is still in solid working condition. I think these went around $80 when new. Won't fit in the small $8.30 box, sorry. $15.05 to ship, so pick out other goodies!
#7
Safariland leather double speedloader belt pouch $10 SOLD
This is seriously old school here and well used but functional and includes two of the Safariland K-frame speedloaders, the small ones. Photo tells the tale. This probably started life in the 1970's or possibly the 1980's. Old but functional. This will fit in the $8.30 box although it bulges a bit, should fit in there.
#8
Smith & Wesson branded Grip Adapter $20 SOLD
I don't know the history of these, but it appears to basically be an imposter of a Tyler T-Grip, clips in the same place and with a metal clip however this item has a rubber texture and is black. There is a S&W logo molded in to the left side of the grip and the face of the grip is lined. Item appears to be unused but older. The cardboard box is probably as "in demand" as the grip unit itself. Has the S&W logo on three sides and the end flap is lightly stamped "MED." likely referring to the size of the grip unit. Box is not in new condition but it is all there and not crushed or torn. I'll guess that someone made this and they were branded for/by S&W. Fits easily in the small Priority box.
#9
Burris 3x pistol scope $50 SOLD
I'm having a tough time pricing this because I don't know how to better identify it. This little guy looks old to me, it has the old script "Burris" in faded gold color on a glossy black optic. The tube is extremely small in diameter, seems to be made for rimfire, but it is long eye relief and made for use on a pistol. Reticle is a simple thin-wire crosshair. Mounted on a Burris base with rings that likely came with the base. Bottom of the base has "SW" stamped in to it, apparently made to mount to a S&W revolver. Pictures will help you determine if you can make this mount work. Seems like a beautiful unit to me, but old. This will safely fit in the $8.30 box but probably not with any other items.
#10
Pachmayr Grip for double stack 3rd Gen $25
This is the rarely seen replacement for the OEM 5906, 4006 and
most variants of the full size double stack 9mm/.40cal 3rd Gen pistols. This will not fit the low production xx26 Sig-style thumb decock models. Not in original packaging but appears none or little used. Warning
these are kind of homely on a 3rd Gen! Fits in the $8.30 box.
#11
Pachmayr grips for 59/459/559/659 $5 SOLD
These are old school cool and possibly made before the ambi-decock finally appeared on the 2nd Gen pistols. As they are not cut for the right side decock lever, these grips are better suited to any 59 or early 2nd Gen 459/559/659 without the right side decock lever.
It will not allow you to decock if you have the ambi lever. Condition is clearly old and used with carry wear on the bottom of each grip but fully functional and pretty good for their age! Easy fit in the small box.
#12
Farrar Grip for 3rd Gen 9/.40 full size double stack $50
This is the best aftermarket grip ever made for the S&W 3rd Gen. Obviously my opinion, but I'm knee deep in these guns. Miles better than the bloated Hogue, better than the short-lived chunky Uncle Mike's/Butler Creek and light years better than the nutty Pachmayr I'm selling above. Grabbier than the OEM delrin/zytel plastic one that S&W shipped. They are slender. They are extremely well constructed and designed. They are good looking too. The Farrar Tool Company offered these back in the late 80's, early 90's and the company ended up defunct. These grips are very hard to find these days and not cheap when you find them. All parts here and in original packaging, the plastic carton is mildly squished. Install instructions included and it is important to follow them -- installing them takes time and patience but the fit and feel is excellent. This is new old stock and will fit any of the 9/.40 3rd Gen full size double stack pistol except the xx26 models. That means 5906, 5946, 5903, 5904, 915, 410, 4006, 4046, 4003 and probably some that I forgot. I have one mounted on my 5-inch Performance Center PPC-9, so you could put one there or even a 3566 Limited. Fits nicely in the $8.30 box.
#13
Hogue palm swell rubber grips for 1911 pistol $5 SOLD
These are very simple, seem slightly used, have a pebbled texture and a very grippy rubber surface. They have a plastic body on the inside that seems durable. The right panel is notched for clearance with an ambi safety if your pistol has that. No grip screws. These are very basic 1911 grips. Fits very small, buy with other items or $8.30 ship.
#14
OEM S&W Model 422/622/2206 plastic fake wood grips $20 SOLD
Scarce, these are plastic and original equipment though I'm not sure they were ever offered with the 2206, they will certainly fit that pistol. They are
not wood but the plastic faux-wood. Condition seems to be high if not new, although someone did write "S&W 422" on the inside of each grip with a black sharpie. No grip screws, sorry. Also fits small, $8.30 or pack with other items.
#15
Aftermarket 39/52 wood stocks $10 SOLD
I can only guess these are Sile or Mustang, possibly Herrett, I don't know and they are not marked. Top of the left side stock has some minor chipping. Right side stock is NOT shaped for ambi safety/decock. That means they will fit on a 439/539/639 also but if your pistol has a right side decock lever, you can't use it with these installed. Pictures will tell the tale on these. NO GRIP SCREWS! Fits small, $8.30 or buy with other items.
#16
Aimtech Base for S&W Model 52 $25 SOLD
This monstrosity is all aluminum, weighs 4 ounces without rings and allows you to mount an optic via Weaver rail on a S&W Model 52/52-1/52-2. As such, you can also use it on a 39, 39-2, 439, 539 and 639.
THE GOOD: You get these rings with it, I have no idea if these rings are any good. I believe these are 30mm, looks a bit bigger than a one inch size. You do not need to permanently alter any pistol you use this with, it simply replaces the right side stock panel and the pin through the mainspring housing. Threaded pin to use with this mount comes with it. In fact, you do NOT need to remove the rear sight either!
THE BAD: Unfortunately, you cannot field strip a 52 pistol with this mounted if the rear sight is in place as it comes because the slide will not go forward of the mount as you would remove it from the frame. The mount is very quick to remove, but you'd want to re-zero each time you put it back on or remove your rear sight.
THE UGLY: This damn thing is ugly as hell. But I'm a traditionalist and I don't like optics on any handgun outside of a single shot.
Google exactly this: "1008773624", this is a Midway stock number for this now discontinued product. Here you can see specs and a couple reviews. $66.99 new when Midway was offering it. This comes with the single threaded hex head bolt for the mainspring housing and uses your grip screws. Would be a solid helping device to range test new loads or ammo even if you didn't want to shoot your pistol all the time with this.
*NOTE* This will absolutely not fit any PC 952/952-1/952-2 pistol. But it can ship in the small $8.30 box.
#17
Llama Minimax9 parts lot $5
If you own this model pistol then for five bucks, you get some goodies here. Seven springs of distinctly different sizes, three small metal parts including a fixed rear sight, and two laminated wood stocks that were OEM on this pistol. No grip screws. All of these parts are in solid but clearly used condition. No idea if they work in any other pistol such as the Minimax45. See picture for more idea of what you get. All easy to fit in the $8.30 box.
#18
S&W 469/669 stripped slide & barrel $60
GUNSMITH SPECIAL! These are NOT FINISHED PARTS. I have no idea of their history. Best guess is that these two items really look like "lunchbox parts" if you know what that term means. They appear "in the white" but I am not a gunsmith. You can see for certain that the slide has not received a polish before finish as the circular milling marks are easily evident. There are no safety/decocker parts. There are no extractor parts. There is no pressed-in barrel bushing either. The barrel itself has seemingly not been fitted to this or any slide -- left oversize for final fitment. The barrel does have rifling. I have tried to drop this barrel in to my 469 and while it is the correct barrel, it is oversize and will not fit in to my slide. If you need a replacement barrel for a 469/669, this may be a gem for you and you'll get an unfinished slide with your purchase. As the 469/669 used what was ultimately the same bushing as the 3rd Gens, this barrel may also be the same part usable for the 6904/6906 and thus, the 3913, 3953 and all variants of the 3rd Gen compacts also.
YMMV! No return on this item (or any items) and you will need the skills of a gunsmith or tinkerer to make either of these parts functional for use. If you need more pictures of this, I can take whatever you request if you can receive them via txt message on your phone. This wil fit in the $8.30 box.
Below were all listed over the last month and as I had some multiples, are still available:
#19 One set of
used .308 Norma Mag dies. These are RCBS, they are probably 30+ years old, they are not rusty or wrecked but they also have years of patina on them. I've not used them and .308 Norma Mag is a near-dead caliber, I can't imagine someone is really searching for these now
but even still, if you want a new set, the prices on them aren't like grabbing a set of .223 dies, I'll tell you that.
They are in a RCBS green plastic box, this is definitely NOT their original box. No instructions, no shell holder, no extra decap pin, but the dies are intact, with lock rings, etc. They are ready to be used.
Price is $40 and these can be shipped USPS Priority for $8.30.
Original ad, and I still have these even after selling a few:
All of these are 100% brand new, never used, original packaging.
Post in this thread with an "I'll take it!" and which item(s) you are claiming. I have some multiples so don't be afraid to ask if you want more than one or if someone above you claimed one you want.
RCBS
Please note that the classic green boxes have been opened and inspected for contents, but never used, never screwed in to a press, factory anti-rust oil on them. RCBS dies come with two dies, instructions and a little sheet for you to scribble notes on. No shell holder included.
#20 F/L DIE SET .30/30 WIN part# 14601
#21 F/L DIE SET .270 WIN SHORT MAG part# 31301
#22 F/L DIE SET .204 RUGER part# 10301
#23 F/L DIE SET .222 REM part# 10901
My best searching says that most of the e-tailers price these right around $39.99 per set give or take.
Smoking deal at $23 per set. I have more than one set of a given caliber, please ask.
Hornady American Series
Each in original package, never used nor removed from package but the UPC has been cut off/missing. (someone used the UPC for the rebate/bullet promotion!
) This series comes with included shell holder and two extra decap pins also in the package. These are not in a die box, but blister packed as they were intended to be a lower-priced offering.
#24 F/L DIE SET .270 Winchester
#25 F/L DIE SET .243 Winchester —-SOLD, GONE
#26 F/L DIE SET .30-06 Springfield ---SOLD, GONE
Web search says that these go for $29.99 per set, give or take.
Fantastic deal at $17 per set! One of each left, don't wait!
#27
Hornady Lock-n-Load AP #6 shell plate
Just one variety, sorry. It's the #6, BRAND NEW, unopened and never used in original blister pack.
The #6 says it fits the 6.5 Grendel, .38 Special, .357 Magnum and 7.62x39mm. That's what is on the packaging but it seems to me that if it fits .38/.357, wouldn't it fit some other known but less popular cartridges also? I don't know.
These are a big hunk of high quality machined metal, but I think the market hangs a high price tag on 'em. Looks like $36 to $40 online. Sounds crazy to me.
I hope you find it to be a great buy at my
$15 price! ONLY two of these left.
Shipping & terms
This kind of stinks out loud! The smallest flat-rate USPS Priority is $8.30 and it will fit a single RCBS box nicely. It will
not fit the silly blister packaging that the Hornady American dies are in.
Your call! I am happy to remove the Hornady packaging and wrap them securely with all pieces and the original Hornady insert if you want the $8.30 shipping.
If you want the larger medium box for multiple die sets or you want the Hornady fully intact as it was displayed and marketed, the post office tells me it's $15.05 for the medium box.
Payment: if you are an
active member here for a year or more and you actually take part in discussions then your personal check is welcome. Otherwise, US Postal money order please.
Communication: my preference is txt message on your phone. This is absolutely the best way to reach me. Post your claim in the thread and then send me a PM, and if txt message via phone works for you,
please send your phone number!
Pictures added hopefully soon but they will reveal no surprise -- these items were stock in a local store that got out of reloading.
Questions? Send 'em! Apologies that I'm long winded.
Gunroom garage sale, PICS added almost 30 different items
Linear Mode
