Smith & Wesson Forum

Advertise With Us Search
Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Ammo

Notices

Ammo All Ammo Discussions Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 09-13-2017, 09:11 PM
rburg rburg is offline
Member
12 gauge all brass 00 buck  
Join Date: Jun 2001
Location: Kentucky, USA
Posts: 7,470
Likes: 2,830
Liked 6,261 Times in 2,170 Posts
Default 12 gauge all brass 00 buck

Can anyone tell me about the all brass shotgun shells I found years ago. They' ve been hiding in my gun room for years now. Double ought buck. Its my guess they came from Vietnam era and we used them because the paper shells would swell and the gubbermint didn't trust the new fangeled plastic ones.

I'm guessing they're as good or better than current production ammo. Anyone here carry a 12 gauge over there?
__________________
Dick Burg
Reply With Quote
The Following User Likes This Post:
  #2  
Old 09-13-2017, 09:19 PM
jinx's Avatar
jinx jinx is offline
US Veteran
12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: Aug 2012
Location: Wyoming
Posts: 1,088
Likes: 1,258
Liked 995 Times in 456 Posts
Default

I personally didn't use a 12 gauge but knew a couple of fellas that did. I did take a couple of their brass shells home and compared them with some that my dad had brought back from WWII. They look as if they came out of the same box.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 09-13-2017, 09:54 PM
SPEEDGUNNER's Avatar
SPEEDGUNNER SPEEDGUNNER is offline
Member
12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: May 2007
Location: Between the Brandywines
Posts: 2,675
Likes: 616
Liked 2,911 Times in 1,066 Posts
Default

All brass is most likely WWII vintage. Do you have any pictures of the shells or the boxes? That would help.
Reply With Quote
  #4  
Old 09-13-2017, 10:17 PM
rburg rburg is offline
Member
12 gauge all brass 00 buck  
Join Date: Jun 2001
Location: Kentucky, USA
Posts: 7,470
Likes: 2,830
Liked 6,261 Times in 2,170 Posts
Default

No pictures, no box even. I bought them in a homemade white paper container, the right size for a 12 gauge. Guess I need to dig them up and really look at them. I have no fear of shooting old ammo, been doing it my whole life. I guess the head stamps can tell me who and when.
__________________
Dick Burg
Reply With Quote
The Following User Likes This Post:
  #5  
Old 09-14-2017, 10:13 AM
jimmyj's Avatar
jimmyj jimmyj is offline
Member
12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: May 2003
Location: DUNNELLON, FLORIDA USA
Posts: 11,111
Likes: 1,691
Liked 16,314 Times in 4,238 Posts
Default

Military issue from WWII. In my era they were issued to prison guards and pay roll escorts
The brass shells held up longer as the shotguns were loaded on issue and unloaded when turned in numerous times.

Last edited by jimmyj; 09-14-2017 at 04:13 PM.
Reply With Quote
  #6  
Old 09-14-2017, 11:49 AM
LoboGunLeather's Avatar
LoboGunLeather LoboGunLeather is offline
US Veteran
12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: Nov 2008
Location: Colorado
Posts: 7,520
Likes: 19,278
Liked 32,371 Times in 5,476 Posts
Default

I have several in my collection. Most are Winchester head-stamp, a few are stamped Wells Fargo. All are 2-1/2" length. Definitely old stuff, more suitable for collectors than for shooters.
Reply With Quote
  #7  
Old 09-14-2017, 12:36 PM
kthom kthom is offline
Member
12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: Aug 2014
Location: West Texas
Posts: 2,447
Likes: 5,289
Liked 3,903 Times in 1,519 Posts
Default

I seem to remember that brass shotgun shells came into being during the years when blackpowder was in use. I have seen a very few that were used in the very large gauges that were used many years ago, such as 10, 8, and 4? gauge shotguns. I remember seeing some of the new brass available for sale in many years past. I do not recall seeing any "factory" made ammo in brass, so these may have always been a handloading proposition. None of this is established fact, just thoughts this post brought back into my head and my memory is highly suspect these days!
__________________
So long ... Ken
Reply With Quote
  #8  
Old 09-14-2017, 01:12 PM
Vulcan Bob's Avatar
Vulcan Bob Vulcan Bob is offline
Member
12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: Mar 2009
Location: central pa
Posts: 5,336
Likes: 2,745
Liked 2,492 Times in 1,182 Posts
Default

I agree more than likely US military. I have a Duck Unlimited tin box commemorative unfired box of 25 12 gauge brass shells by Remington at a flea market years ago. Last ones I have seen.
__________________
Stay safe people!
Reply With Quote
  #9  
Old 09-14-2017, 02:17 PM
30-30remchester 30-30remchester is online now
Member
12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: Jan 2011
Location: Mountains of Colorado
Posts: 2,811
Likes: 2,428
Liked 6,630 Times in 1,832 Posts
Default

From my feeble memory, I recall these being mid to late WW II. In the Pacific where most shotguns were used, problems arose from paper shells swelling when they got wet and then had failures to feed or extract. So the brass shotshell was produced to eliminate the problem. By the time Vietnam got rolling, plastic shotshells were all the rage and these are what was used most of the time. Early 1900's also saw brass shotshells but these were not popular.
Reply With Quote
  #10  
Old 09-14-2017, 02:38 PM
DWalt's Avatar
DWalt DWalt is offline
Member
12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,606
Likes: 240
Liked 29,113 Times in 14,076 Posts
Default

Brass shotshell cases have a long history. During the late 19th Century, most hunters loaded their own shotshells in brass cases before they went hunting. Not much in the way of reloading tools was needed beyond a powder dipper and a shot dipper. Factory paper shells became much more popular later. Both brass and paper shells were used by the military during WWII. Most shotgun combat use was during the Pacific campaign, and brass shells were used there. I don't remember ever hearing about shotgun use, at least under combat conditions, in the ETO, or later, in the Korean War. The moist and wet conditions in the Pacific affected paper cases adversely. Remington once made a waterproof paper shotshell mainly for duck hunters, under the "Arrow" brand. The paper case was coated with clear shellac, and they are easily distinguished by their glossy appearance. I have one specimen of a 00 Buck 12 gauge Remington "Arrow" shell, but have no idea whether it might have been military. Plastic shotshell cases made their first market appearance in the early 1960s and provided satisfactory moisture resistance for combat use, and were well established by the Vietnam War era. There may have been some brass case shotshells left over from WWII used in Vietnam, but I am not sure of that.

Last edited by DWalt; 09-14-2017 at 04:42 PM.
Reply With Quote
The Following User Likes This Post:
  #11  
Old 09-14-2017, 03:09 PM
jdlii's Avatar
jdlii jdlii is offline
Member
12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: Jun 2009
Location: TN
Posts: 2,229
Likes: 5,219
Liked 4,871 Times in 1,396 Posts
Default

I have one in my meger ammunition collection and have attached a poor photo showing the shell. It is, as has been mentioned, a 12 gauge.

A photo of the headstamp was taken but, I cannot retreive it from the computer. The headstamp shows "WINCHESTER" at the 12 O'Clock position and "No. 12" , with the "o" in a higher position and underlined.

The "crimped" end of the shell is rolled over onto a heavy paper insert. The middle of the paper insert has a circle, stamped in black ink and in the center of the circle at the top, "00" appears and then centered between and below the "00" is a "B."

The shell length is 2 3/4 inches. I obtained this shell from a friend of mine who was a Major in the USMC. He shot on the Pacific high power rifle team and was a member of the Trap and Skeet team when stationed on Okinawa. He told me that he discovered two cases of these in an ammo bunker and decided that since they were not on the inventory, he would dispose of them as a service to the Corps.

I will try to post photos of the headstamp and the crimped end this evening.
Attached Images
File Type: jpg 12B.JPG (101.7 KB, 101 views)
Reply With Quote
  #12  
Old 09-14-2017, 07:05 PM
jdlii's Avatar
jdlii jdlii is offline
Member
12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: Jun 2009
Location: TN
Posts: 2,229
Likes: 5,219
Liked 4,871 Times in 1,396 Posts
Default

I have now been able to attach a photo of the head stamp and the crimped end.
Attached Images
File Type: jpg IMG_0795.JPG (46.4 KB, 90 views)
File Type: jpg IMG_0794.JPG (46.6 KB, 80 views)
Reply With Quote
  #13  
Old 09-14-2017, 09:50 PM
rburg rburg is offline
Member
12 gauge all brass 00 buck  
Join Date: Jun 2001
Location: Kentucky, USA
Posts: 7,470
Likes: 2,830
Liked 6,261 Times in 2,170 Posts
Default

The 12 gauge all brass are Rem-Umc/Best. I'm going to guess that maybe they are reloads because I can see marks that appear to be resizing grooves. Worse, they seem to be sealed with what my father used to call "glassine" over the over-shot wads. Worse still, the first one I pulled out has a crack in the case and head. I've never seen that before on center fire ammo. It comes up the body, then through the rim and over nearly to the primer. That one is clearly unsafe to fire.
__________________
Dick Burg
Reply With Quote
  #14  
Old 09-15-2017, 10:29 AM
Skeetr57 Skeetr57 is offline
SWCA Member
12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: Jul 2004
Location: Inman, SC USA
Posts: 1,303
Likes: 95
Liked 649 Times in 372 Posts
Default

The Army was still issuing some brass shells when I came into the Army in 1966.They were loaded by W-W and came in boxes of 5 rounds. the boxes were tan cardboard with all the normal military printing. They were readily available at the time and I wish that I had saved some of them. I saw a good many shotguns in use in VN in 1969-70, but don't recall the ammo used.
__________________
Tom
1560
Reply With Quote
  #15  
Old 09-15-2017, 10:44 AM
LoboGunLeather's Avatar
LoboGunLeather LoboGunLeather is offline
US Veteran
12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: Nov 2008
Location: Colorado
Posts: 7,520
Likes: 19,278
Liked 32,371 Times in 5,476 Posts
Default

Quote:
Originally Posted by Skeetr57 View Post
The Army was still issuing some brass shells when I came into the Army in 1966.They were loaded by W-W and came in boxes of 5 rounds. the boxes were tan cardboard with all the normal military printing. They were readily available at the time and I wish that I had saved some of them. I saw a good many shotguns in use in VN in 1969-70, but don't recall the ammo used.
We had Winchester Model 12's and Model 1897's during my time in Vietnam. Typical ammo issued was plastic-cased high-brass 2-3/4" with copper-plated 00 buckshot, but we also saw some loaded with fleshettes (steel darts with fins, about the size of 4d finishing nails).

The 1897's were the original WW1 era "trench guns", equipped with perforated steel heat shields around the barrels with bayonet lugs accepting the 1917 Enfield bayonets.

The Model 12's were more recent production, probably 1950's or 1960's), some were equipped with heat shields while some were not. Some were parkerized, some were blued steel. Some were stamped with the Ordnance Bomb markings, some appeared to be standard police riot guns.

I don't recall seeing shotguns used in infantry field operations. Most of the shotguns I saw were on base camps where they were carried by fixed and patrolling guards.

Last edited by LoboGunLeather; 09-15-2017 at 10:47 AM.
Reply With Quote
  #16  
Old 09-15-2017, 10:48 AM
DWalt's Avatar
DWalt DWalt is offline
Member
12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck 12 gauge all brass 00 buck  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,606
Likes: 240
Liked 29,113 Times in 14,076 Posts
Default

"Worse, they seem to be sealed with what my father used to call "glassine" over the over-shot wads."

I have never heard it called Glassine, but the old-time practice was to cement the over-shot cardboard disc in place in the brass case mouth with a sodium silicate solution usually called "water glass." It was used to seal eggs. You would dip fresh eggs into a sodium silicate solution and it would seal the porous eggshell against any air migration through the shell, allowing raw eggs to be stored for a long time without going rotten. This eggshell sealing method was very common back in the days before refrigeration, and water glass was a standard general store stock item. When the silicate solution dries it is hard and glassy and makes a pretty good adhesive.

Many old timers also cut their own felt over-powder wads and cardboard over-shot discs using circular cutting punches, but they could also buy ready-made felt wads and cardboard discs. It worked then, and would still work today. Many hunters back then didn't feel the need to carry much more than a half-dozen shells afield, as they usually made every shot count.

Last edited by DWalt; 09-15-2017 at 11:10 AM.
Reply With Quote
The Following 2 Users Like Post:
Reply


Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: S&W High Brass 12 gauge shells Sitndux3294 WANTED to Buy 0 09-29-2014 10:57 AM
12 gauge 00 or 000 buck CCantu357 Ammo 29 08-04-2014 04:56 AM
low buck methods washing dry muddy brass SW CQB 45 Reloading 9 02-04-2013 02:13 AM
Federal 16 Gauge Buck Jack Flash Ammo 6 11-09-2009 10:48 AM
F/S 12 Gauge Frangible rounds, OO Buck,33 boxes Colo. executioner Accessories/Misc - For Sale or Trade 1 10-24-2009 10:20 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 05:57 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)