Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Ammo
o

Notices

Ammo All Ammo Discussions Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 04-09-2009, 04:17 PM
BobM BobM is offline
Banned
 
Join Date: Jul 2004
Location: Monroe N.C. USA
Posts: 58
Likes: 0
Liked 0 Times in 0 Posts
Default

Just aquired two boxes of Hirtenberger ball ammo
marked L7A1 in plain brown boxes. Also marked HP-23-05-91. Is this NATO pressure and safe to fire in my steel frame 5946, or is it machine gun ammo?
Thanks, Bob
Reply With Quote
  #2  
Old 04-09-2009, 04:28 PM
john traveler john traveler is offline
Member
 
Join Date: Nov 2007
Location: west coast
Posts: 1,486
Likes: 0
Liked 55 Times in 34 Posts
Default

Please be advised that the BATFE was notified by Hirtenberger that L7A1 9x19 NATO ammunition was contract produced for the British Ministry of Defence for use in submachineguns ONLY, and was not to be used in pistols. The pressure levels are beyond +P and the intended use was for submachineguns in cold climates. I recall an American Rifleman magazine warning to this effect in the 1990s.

Do a Google search for "L7A1 Hirtenberger 9mm"
Reply With Quote
  #3  
Old 04-10-2009, 09:36 AM
Texas Star Texas Star is offline
US Veteran
Absent Comrade
9mm nato? 9mm nato?  
Join Date: Mar 2005
Location: Texas
Posts: 20,362
Likes: 24,260
Liked 16,154 Times in 7,408 Posts
Default

Quote:
Originally posted by john traveler:
Please be advised that the BATFE was notified by Hirtenberger that L7A1 9x19 NATO ammunition was contract produced for the British Ministry of Defence for use in submachineguns ONLY, and was not to be used in pistols. The pressure levels are beyond +P and the intended use was for submachineguns in cold climates. I recall an American Rifleman magazine warning to this effect in the 1990s.

Do a Google search for "L7A1 Hirtenberger 9mm"

British Radway Green 9mm ammo is also loaded hot. I think using such ammo in pistols is what caused so many breakages in Browning pistols in UK service.

T-Star
Reply With Quote
  #4  
Old 04-10-2009, 03:45 PM
BobM BobM is offline
Banned
 
Join Date: Jul 2004
Location: Monroe N.C. USA
Posts: 58
Likes: 0
Liked 0 Times in 0 Posts
Default

Thanks everyone.
Bob
Reply With Quote
  #5  
Old 04-13-2009, 10:41 AM
danski danski is offline
Member
 
Join Date: Jan 2008
Posts: 316
Likes: 0
Liked 2 Times in 2 Posts
Default

I remember an article that the Special Air Services put a 2,000-round life span on Browning High Powers for 9mm stuff that was being issued.
IIRC the SAS found cracked frames with repeated use.
Reply With Quote
  #6  
Old 07-04-2011, 02:23 PM
sw1977 sw1977 is offline
Member
9mm nato? 9mm nato? 9mm nato? 9mm nato? 9mm nato?  
Join Date: Nov 2009
Posts: 284
Likes: 0
Liked 1 Time in 1 Post
Default

I know it is old thread.
However....
"Hi all,

The subject of this ammunition has come up on various forums, and quite alot recently, so I am posting this in order to debunk the misconceptions (which seem BOUNDLESS) about this ammo.

Firstly, it must be stated at Hirtenberger Patronen (HP) is an ammunition company like any other. Just because someone has obtained Hirtenberger ammunition in 9mm Parabellum (Luger), does NOT mean it is the submachine gun ammunition. HP produces many loadings in 9mm Parabellum (Luger).

Many people have erroneously believed that HP's 124 gr. +P+ (usually marked "HV") rounds are the "submachinegun" rounds- and this is flatly incorrect. These rounds are designed for pistols, whereas the SMG rounds are not.

Hirtenberger has produced two types of SMG ammunition. Both were developed on request for the British Ministry Of Defence:

L7A1- This ammunition was produced between 1990 and 1992. Many samples exceed the NATO maximum chamber pressure specification for small arms, which is 50,000 PSI (345 MPa). For this reason, the British MOD ceased to use it. It was replaced with:

L12A1- This ammunition is substantially similar, but uses a slightly reduced charge in order to stay under the 50,000 PSI NATO maximum pressure specs.

Both of these rounds feature a 124-grain FMJ ball bullet, and produce a maximum velocity of about 1,500 fps.

Contrary to popular belief, these rounds were not designed for arctic conditions, nor were they developed for the Sterling SMG. They were designed for use in H&K MP5 series SMGs. Although they were undoubtedly tested under arctic conditions, the use of the term "adverse conditions" in its designation is more euphemistic than anything else.

In terms of the commercial availability of these rounds, the MOD released 12 million rounds of L7A1 ammunition as surplus. Since the ammunition is packaged in a 1,200 round case, this means that 10,000 cases were released. Since HP refuses to sell this ammunition to the public, and only produced L7A1 in 1990, 1991, and 1992, and only for the British contract, that means that the entire world's supply consists of 10,000 cases.

Likewise, within several months of release, BATF banned the importation of the ammunition, due to its being unsafe for use in handguns. This second fact makes the ammunition even more rare in the United States.

If offered this ammunition for sale, view the offer skeptically, as the above-mentioned facts limit the actual availability of such ammunition- and likewise, a considerable amount of the ammunition imported into the United States has undoubtedly been fired already by its owners.

Beware of attempts to sell ammunition which is falsely advertised as " Hirt SMG ammo ". Many dealers, either due to ignorance or fraudulence, will sell standard Hirtenberger ammunition and claim that it is the SMG rounds.

L7A1 ammunition can be identified by its headstamps:

'HP' (for Hirtenberger Patronen)
'90', '91', or '92' (year of production)
'L7A1' (ammunition type)
NATO proof mark (a circle with a cross inside)

If the headstamp doesn't contain "L7A1", it is NOT the SMG rounds.

Some forgeries of this ammunition have been produced in other nations (particularly in Darra, Pakistan, where many forgery firearms and ammunition are produced for the black market). The easiest way to tell that the ammunition is forged, is the absence, or poor application, of a red sealant ring around (and slightly onto) the primer.

Any ammunition marked "L12A1" is either a forgery or stolen, since HP produces it exclusively for British MOD.

The only other manufacturers of "SMG" ammunition (to my knowledge) are:

Israel Military Industries (IMI), who produce the ammunition packaged in either plain brown boxes or boxes with the " UZI " logo. These rounds are black-tipped, but the black tip designates them only as high-pressure, not specifically as SMG rounds; and

Remington, who have produced a 9mm SMG round loaded with a standard JHP (not Golden Saber) bullet. Any company advertising Remington SMG Golden Sabre rounds is falsely advertising.

Note that Remington only produces the SMG rounds on a per-request basis, and only for government agencies. Likewise, IMI produces the SMG ammunition rarely (mostly for Israeli and American military contracts) and very few samples of it are in circulation in the US, mostly in the hands of collectors.

SMG-specific rounds are NOT SAFE to fire in any handgun. There are a few handguns designs which can tolerate it SPARINGLY, but I do not recommend this practice. Remember, the SAAMI maximum chamber pressure for 9mm +P rounds is 38,500 PSI, and the NATO maximum chamber pressure for small arms, including rifles, is 50,000 PSI. SMG-specific rounds meet or exceed the 50,000 PSI mark.

Note also that SMG rounds are likewise unsafe to fire in many submachineguns, and virtually all pistol-cartridge carbines, since both are usually engineered for 9mm pistol ammunition. Only a very few models of carbines and submachine guns are suitable for firing the ammunition in; if in doubt, contact the manufacturer and ask them about the use of L7A1 ammunition in their guns."

Found this info on the net.
__________________
Memento mori
Reply With Quote
The Following User Likes This Post:
  #7  
Old 07-04-2011, 04:56 PM
Walter Rego Walter Rego is offline
Member
9mm nato? 9mm nato? 9mm nato? 9mm nato? 9mm nato?  
Join Date: Aug 2003
Location: Occupied California
Posts: 2,777
Likes: 1,512
Liked 5,559 Times in 1,602 Posts
Default

I have a box of Hirtenberger ammo that is packed in a rather generic brown pasteboard carton with a white label pasted over the top that reads "Hirtenberger 50 Cartridges 9mm Luger 100 grs Soft Point FL-Bullet Law Enforcement Grade.
The bullet is truncated with a flat tip and just a couple of mm of lead exposed.
The headstamp is HP 9mm LUGER +P+ and there is read sealant around the primer. I've had it for probably 15 years or so.
It's not the SMG ammo but I'll take the +P+ headstamp for it's word that it's loaded hotter than standard 9mm ball and reserve it's use for all steel pistols.
Reply With Quote
Reply

Tags
browning, cartridge, chamber pressure, commercial, headstamp, military, primer, rifleman, submachine

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
.308 vs 7.62 NATO ISCS Yoda Ammo 6 10-21-2014 09:59 PM
9mm NATO? Cyrano Ammo 29 09-27-2014 09:20 PM
9mm NATO? erick1987 Smith & Wesson M&P Pistols 6 04-06-2014 06:26 PM
9mm Nato RSBH44 Smith & Wesson Semi-Auto Pistols 7 08-13-2012 07:59 PM
9mm nato in 9c? blkpitbull Smith & Wesson M&P Pistols 1 04-28-2012 11:32 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 04:39 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)