|
|
01-01-2009, 12:25 PM
|
Member
|
|
|
Join Date: May 2007
Posts: 131
Likes: 1
Liked 11 Times in 7 Posts
|
|
Any suggestions, aside from get a bigger gun , on a good load for the .380 acp. Need a deep concealment/backup and the flat slide of my ppk is easier on me than my j frames. I was thinking about the DPX ammo but cant find any data to support this, so any suggestions?
|
01-01-2009, 12:25 PM
|
Member
|
|
|
Join Date: May 2007
Posts: 131
Likes: 1
Liked 11 Times in 7 Posts
|
|
Any suggestions, aside from get a bigger gun , on a good load for the .380 acp. Need a deep concealment/backup and the flat slide of my ppk is easier on me than my j frames. I was thinking about the DPX ammo but cant find any data to support this, so any suggestions?
|
01-01-2009, 12:54 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2001
Location: illinois
Posts: 6,298
Likes: 1,850
Liked 6,696 Times in 2,119 Posts
|
|
Search thru here, this is a favorite topic. There is a recent test of the new Hornady rounds.
|
01-01-2009, 01:05 PM
|
Member
|
|
|
Join Date: May 2007
Posts: 131
Likes: 1
Liked 11 Times in 7 Posts
|
|
Favorite topic? Are you a .380 fan?
|
01-01-2009, 01:05 PM
|
|
Member
|
|
|
Join Date: Jan 2003
Location: High Desert of NM, USA
Posts: 6,259
Likes: 9,419
Liked 8,911 Times in 2,574 Posts
|
|
You know, Steve Camp's post here last week on the newest Hornady Critical Defense ammo for the .380 certainly looked promising.
http://smith-wessonforum.com/eve/for...4/m/5071005733
I can tell you that I've worked on a couple of .380 _hollowpoint_ shooting cases in which the rounds didn't penetrate adequately (you've got a lightweight bullet traveling pretty slow and then the hollowpoint opens and acts as a brake). I've worked on many .380 FMJ cases and found the rounds always penetrated adequately. Personally, I'd use the hottest .380 FMJ that functioned well in a PPK, though I'd consider that new Hornady stuff.
Best of luck with it, amigo.
__________________
Now go make God proud...
|
01-01-2009, 01:20 PM
|
Member
|
|
|
Join Date: May 2007
Posts: 131
Likes: 1
Liked 11 Times in 7 Posts
|
|
Are the Buffalo Bore rounds too much for a ppk, read the post where they made a kel tec come apart.
|
01-01-2009, 01:28 PM
|
Member
|
|
|
Join Date: Aug 2007
Location: Oklahoma
Posts: 8,161
Likes: 3,620
Liked 5,209 Times in 2,174 Posts
|
|
Quote:
Originally posted by erickg:
Are the Buffalo Bore rounds too much for a ppk, read the post where they made a kel tec come apart.
|
I think you'll find the PPK and SIG to be at a higher level of strength in the .380s.
__________________
Science plus Art
|
01-01-2009, 03:30 PM
|
|
Member
|
|
|
Join Date: Jan 2003
Location: High Desert of NM, USA
Posts: 6,259
Likes: 9,419
Liked 8,911 Times in 2,574 Posts
|
|
I disagree.
The Kel-Tec has a locked breech and is probably safer and more reliable with more powerful ammo than the blowback SIG-Sauers or Walthers.
I found that my SIG-Sauer P232 would not run reliably with extra-power Double Tap .380. My friend's P3AT liked it just fine. I'm not saying that Kel-Tecs aren't schlocky-feeling guns (their actions remind me of the feel of the little plastic "Zebra Gun" pistol that my little brother used to play with when he was eight), but I believe that their locked-breech mechanism is stronger than and capable of handling more powerful ammo than those on a Walther or SIG-Sauer .380 pistol.
If you go away from conventional-power .380s, fire enough of the round to be very sure that it will properly actuate your Walther. Blowbacks are "engines" that function only with "fuel" of a certain power range. Get too much energy into the slide and weird things start to happen: on my P232 with the powerful Double Tap .380s, the slide velocity was too high to ensure that the rounds fed properly out of the magazine for smooth functioning. Possibly I could have fixed this with stronger magazine springs and a more powerful recoil spring (although the mainspring of a blowback is also part of the equation), but I'm not an engineer and don't have that much time to burn so I simply decided to use ammo that was within the gun's design parameters.
__________________
Now go make God proud...
|
01-01-2009, 04:04 PM
|
Member
|
|
|
Join Date: Aug 2006
Posts: 287
Likes: 2
Liked 9 Times in 8 Posts
|
|
Erich,
What do you think about the 102gr Golden Sabers? Have you seen any shootings where they were used?
|
01-01-2009, 04:56 PM
|
US Veteran
|
|
|
Join Date: Sep 2006
Location: The Rust Belt Buckle/Mich
Posts: 2,382
Likes: 0
Liked 41 Times in 32 Posts
|
|
Quote:
Originally posted by Erich:
I can tell you that I've worked on a couple of .380 _hollowpoint_ shooting cases in which the rounds didn't penetrate adequately (you've got a lightweight bullet traveling pretty slow and then the hollowpoint opens and acts as a brake). I've worked on many .380 FMJ cases and found the rounds always penetrated adequately. Personally, I'd use the hottest .380 FMJ that functioned well in a PPK, though I'd consider that new Hornady stuff.
|
Erich, did you se my write up on Fiocchi Extrema .380? That is a deep penetrating hollowpoint, featuring the Hornady 90 gr. XTP bullet. I figured those would be right up your alley, and they're only about $23.00 for a box of fifty.
A search in the Test Bed forum at www.stoppingpower.net should yield useful Gelatin test results. IIRC the Golden Sabre was a little on the shallow side as far as penetration is concerned. www.brassfetcher.com should have useful info also.
|
01-01-2009, 05:13 PM
|
Member
|
|
|
Join Date: Dec 2008
Posts: 20
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally posted by SWAT Lt.:
Erich,
What do you think about the 102gr Golden Sabers? Have you seen any shootings where they were used?
|
The thing that I found out about golden sabres are the muzzle flash is pretty big.. I just switched over from my golden sabres to hornady TAP XTP. They are exclusively made for cabelas, and what I have found out about these are no muzzle flash. To me that is important as well as shot placement. They are extremely accurate with zero muzzle flash. They feed the best from all the other 380s that I have fed, my Sig 232 and Ruger LCP. I am highly recommending these because I just compared them at the range on Tuesday. As a matter of fact, I have switched all my calibers over to the hornady TAPs.
|
01-01-2009, 07:52 PM
|
Member
|
|
|
Join Date: Jan 2006
Posts: 17
Likes: 0
Liked 1 Time in 1 Post
|
|
I would try Hornady's new critical defense. All I have read about them is positive. I just got some, but have not tried them out yet.
|
01-01-2009, 07:55 PM
|
Member
|
|
|
Join Date: May 2007
Posts: 131
Likes: 1
Liked 11 Times in 7 Posts
|
|
No thoughts on DPX?
|
01-01-2009, 08:49 PM
|
Member
|
|
|
Join Date: Aug 2007
Location: Oklahoma
Posts: 8,161
Likes: 3,620
Liked 5,209 Times in 2,174 Posts
|
|
Quote:
Possibly I could have fixed this with stronger magazine springs and a more powerful recoil spring (although the mainspring of a blowback is also part of the equation), but I'm not an engineer and don't have that much time to burn so I simply decided to use ammo that was within the gun's design parameters.
|
If you're having timing problems (as opposed to breaking parts) a fresh sets of springs to match the load is the usual fix. I use hot .380 handloads that ruin the cases for reuse, but the pistol is sprung and timed for them, so there are no reliability issues.
__________________
Science plus Art
|
01-01-2009, 09:07 PM
|
|
Member
|
|
|
Join Date: Jan 2003
Location: High Desert of NM, USA
Posts: 6,259
Likes: 9,419
Liked 8,911 Times in 2,574 Posts
|
|
I'm sure that's exactly what I said. I'd have had to orchestrate the recoil spring, mainspring and magazine spring to match the load.
__________________
Now go make God proud...
|
01-02-2009, 05:33 AM
|
US Veteran
|
|
|
Join Date: Sep 2006
Location: The Rust Belt Buckle/Mich
Posts: 2,382
Likes: 0
Liked 41 Times in 32 Posts
|
|
Quote:
Originally posted by erickg:
No thoughts on DPX?
|
My hunch is that DPX is as good as it gets. I've never fired .380 DPX , but hope to test it this year. The Barnes X bullet seems perfect for the .380.
|
01-02-2009, 05:39 AM
|
US Veteran
|
|
|
Join Date: Sep 2006
Location: The Rust Belt Buckle/Mich
Posts: 2,382
Likes: 0
Liked 41 Times in 32 Posts
|
|
I just looked over on www.stoppingpower.net . DPX gelatin test impressed me that it's an underpenetrator. I may still try it myself, but it's definately a back burner type project.
|
01-02-2009, 06:59 AM
|
Member
|
|
|
Join Date: Apr 2006
Location: North Carolina
Posts: 16
Likes: 0
Liked 0 Times in 0 Posts
|
|
What about Corbon PowrBall in 380?
|
01-02-2009, 09:25 AM
|
US Veteran
|
|
|
Join Date: Sep 2006
Location: The Rust Belt Buckle/Mich
Posts: 2,382
Likes: 0
Liked 41 Times in 32 Posts
|
|
They shot it into gelatin at www.stoppingpower.net . Look there for results.
|
01-07-2009, 01:30 AM
|
Member
|
|
|
Join Date: Dec 2008
Location: Northern California
Posts: 7
Likes: 0
Liked 0 Times in 0 Posts
|
|
One of the guns Buffalo Bore tests it's 380 ammo in is a PPK/S I believe. I think it should be ok to shoot occasionally. I think this is the hottest 380 ammo I have found.
Call me old fashioned but I like the Winchester Silvertips. The new Hornady ammo is also worth a look!
__________________
Land of the Free Because of the Brave
|
01-10-2009, 10:23 AM
|
Member
|
|
|
Join Date: Dec 2008
Location: florida
Posts: 191
Likes: 0
Liked 0 Times in 0 Posts
|
|
DPX has pitiful penetration in meat.
This bullet is way too light and underpowered.
The ONE bullet I would stay away from at all cost in a 380. I am serious about this. Don't do it! Anything but this bullet in a 380.
It's almost in the fragmentation class since it just will not penetrate reliably.
|
01-10-2009, 12:02 PM
|
|
Member
|
|
|
Join Date: Dec 2001
Location: Michigan
Posts: 1,216
Likes: 647
Liked 799 Times in 392 Posts
|
|
If I were to carry a 380, I'd go with the Golden Saber, it's a 102 grain bullet.
Don't think your going to get any expansion in a 380, so might as well have the heaver bullet.
And you never know, it might expand.
__________________
John
|
01-10-2009, 02:55 PM
|
US Veteran
|
|
|
Join Date: Sep 2006
Location: The Rust Belt Buckle/Mich
Posts: 2,382
Likes: 0
Liked 41 Times in 32 Posts
|
|
Pretty much any .380 will penetrate over 16" if it doesn't expand, so 90 gr. loads are fine.
|
01-10-2009, 03:29 PM
|
Member
|
|
|
Join Date: Dec 2008
Location: florida
Posts: 191
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally posted by John R:
If I were to carry a 380, I'd go with the Golden Saber, it's a 102 grain bullet.
Don't think your going to get any expansion in a 380, so might as well have the heaver bullet.
And you never know, it might expand.
|
Have faith, sabers will expand. Even rumbling at turtle speed, these brass jackets will peel back leaving a nice hunk of lead.
These 102 grain bullets will also overcome obstacles better than the 90 grainers.
However,The corbon personal protection is a a good choice if you really want the 90 grainers.
Really a lot of it is splitting hairs.
Corbon JHP, Buffalo gold dots, Golden Sabers all are pretty darn good stuff.
|
01-10-2009, 04:39 PM
|
US Veteran
|
|
|
Join Date: Sep 2006
Location: The Rust Belt Buckle/Mich
Posts: 2,382
Likes: 0
Liked 41 Times in 32 Posts
|
|
I'm leary of the Corbon .380s. I bought some Sierra .90 gr. .355 bullets, loaded them to Min. OAL and the cartridges wouldn't even chamber in my Kel-tec. The bullet hit the rifling before the breech closed. I wonder if others have had the same results with Corbon .380 JHPs?
|
01-10-2009, 07:45 PM
|
Member
|
|
|
Join Date: Aug 2008
Location: seattle/tacoma
Posts: 62
Likes: 0
Liked 0 Times in 0 Posts
|
|
I carry a Ruger LCP when all else fails to fit the occasion. I load it up with the Hornady Critical Defense round.
I've been considering alternating with a very hot round like the BB but haven't got around to trying any.
I've gone round and round on .380 ammo until my head hurts.
I trust Mr. Camp's tests. He strikes me as someone I can trust. That's why I have happily settled on Hornady Critical Defense as my main carry round even if I do end up alternating with hotter stuff to hedge my bets.
I do think that penetration is pretty much king when considering any kind of "stopping" ability with the .380 guns. You've got to reach the vitals and hopefully the spinal area from the front to the back with any hope of stopping an assailant. But then, isn't that true of ANY handgun bullet?
That's why the hedging of bets with a hot flat point from BB etc. alternating with my main load - even though Hornady is deffinately now in the picture to stay.
|
01-10-2009, 09:30 PM
|
Member
|
|
|
Join Date: Dec 2008
Location: florida
Posts: 191
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally posted by flop-shank:
I'm leary of the Corbon .380s. I bought some Sierra .90 gr. .355 bullets, loaded them to Min. OAL and the cartridges wouldn't even chamber in my Kel-tec. The bullet hit the rifling before the breech closed. I wonder if others have had the same results with Corbon .380 JHPs?
|
You are correct Corbons JHP's are absolutely an issue in certain guns. One of the reasons the Ruger LCP got recalled is the Corbons were not seating right. I shot em in my Keltec and LCP and in my LCP experienced just what you did. It didn't seem to chamber right.
Didn't have any malfunctions but it did make me leery.
Heck of a bullet though. They have some zip to em.
|
01-11-2009, 04:47 AM
|
US Veteran
|
|
|
Join Date: Sep 2006
Location: The Rust Belt Buckle/Mich
Posts: 2,382
Likes: 0
Liked 41 Times in 32 Posts
|
|
Thanks for the confirmation, Gator. I have to agree about Sierra bullets. If there was any bullet I would trust to work well in a .380, it would be a Sierra. Too bad they have issues with the rifling.
Quote:
Originally posted by marvin knox:
I carry a Ruger LCP when all else fails to fit the occasion. I load it up with the Hornady Critical Defense round.
I've been considering alternating with a very hot round like the BB but haven't got around to trying any.
I've gone round and round on .380 ammo until my head hurts.
I trust Mr. Camp's tests. He strikes me as someone I can trust. That's why I have happily settled on Hornady Critical Defense as my main carry round even if I do end up alternating with hotter stuff to hedge my bets.
I do think that penetration is pretty much king when considering any kind of "stopping" ability with the .380 guns. You've got to reach the vitals and hopefully the spinal area from the front to the back with any hope of stopping an assailant. But then, isn't that true of ANY handgun bullet?
That's why the hedging of bets with a hot flat point from BB etc. alternating with my main load - even though Hornady is deffinately now in the picture to stay.
|
Marvin, stop hurting your head and just run with what you're using. I believe those Hornadys you're packing use the same bullet, at the same velocity, as the Fiocchi Extrema .380 I tested. If the bullet expands, you will get 12" penetration, if it doesn't, you're looking at around 16". I wouldn't waste my time "dutch loading" my pistol if I were you.
Also, if you do a search in this forum, I started a thread about my tests of Buffalo Bore's .380 +P Gold Dot. It is a great performer in Perma-Gel, but too hard on guns IMO. Maybe Rugers are tougher than Kel-tecs, but I wouldn't chance it. That load beat the snot out of my gun.
|
01-12-2009, 04:29 PM
|
Member
|
|
|
Join Date: Aug 2008
Location: seattle/tacoma
Posts: 62
Likes: 0
Liked 0 Times in 0 Posts
|
|
QUOTE]...........Marvin, stop hurting your head and just run with what you're using. I believe those Hornadys..................[/QUOTE]
I think you may well be right there. My head does hurt.
I remember all the considering of different carry ammo that I went through with my flyweight .357 snub. I finally settled on DPX 125 gr. at around 1100fps or a little less.
It has less kick than most all of the .357 ammo out there. The DPX bullet can expand well and still penetrate well at snubbie velocities of a little under 1100fps. Not many can say that. I've found a cheap practice round that kicks about the same and has the same POI.
My head no longer hurts from that decision. I'm set for life and I won't go through any more considerations concerning that particular carry gun's ammo.
I probably should do the same with the .380. I trust Steven Camp's evaluation. It looks like it's a fine performer (as good as can be expected any way). If it's not the best - at least it's right up there with the best. It also doesn't hurt my little gun or my hand much . I'll probably shoot better with it than anything hotter, expecially left handed etc.
A real good feeling comes over me when I consider that I have made my final ammo choice and can now just relax and practice. I think it may be wise to trust that feeling.
(My little LCP will probably thank me after a few hundred rounds as well.)
|
01-12-2009, 04:59 PM
|
US Veteran
|
|
|
Join Date: Sep 2006
Location: The Rust Belt Buckle/Mich
Posts: 2,382
Likes: 0
Liked 41 Times in 32 Posts
|
|
As long as your gun is 100% reliable, your work is done, Marvin. I do stand corrected on one thing I said above. The Critical Defense ammo features the Hornady FTX bullet which is different from that which Fiocchi Extrema uses. Extrema uses the XTP bullet. If you haven't fired a sufficient quantity of Critical Defense through your gun to be done with reliability testing, you might want to try Extrema. It is way less expensive than Hornady or the Speer ammo I use, and every bit as good.
|
01-20-2009, 04:14 PM
|
US Veteran
|
|
|
Join Date: Mar 2004
Location: Alabama
Posts: 566
Likes: 384
Liked 621 Times in 203 Posts
|
|
From my own experience; I will not ever use CorBon in .380 again. It cycled fine and is definately "high performance", but the bullets bit into the rifling when loaded, it is almost impossible to cycle the slide with a live round chambered, making it almost impossible to unload my PPK, each time that I tried I ended up pulling the bullet out of the case, spilling powder into the pistol, and the bullet had to be rodded out. I know I could have went some where and just shot it out but that was not practical.
|
01-24-2009, 04:49 PM
|
Member
|
|
|
Join Date: Jan 2009
Posts: 241
Likes: 1
Liked 33 Times in 18 Posts
|
|
380 hollowpoints are lousy penetration wise.
Put FMJ in it and use excellent shot placement.
|
01-24-2009, 06:13 PM
|
US Veteran
|
|
|
Join Date: Sep 2006
Location: The Rust Belt Buckle/Mich
Posts: 2,382
Likes: 0
Liked 41 Times in 32 Posts
|
|
Many hollowpoint offer more than 12" pen. consistently.
|
|
Posting Rules
|
|
|
|
|