Smith & Wesson Forum

Go Back   Smith & Wesson Forum > General Topics > Concealed Carry & Self Defense
o

Notices

Concealed Carry & Self Defense All aspects of Concealed and Open Carry, Home and Self Defense.


Reply
 
Thread Tools Display Modes
  #51  
Old 01-29-2014, 12:44 AM
shouldazagged shouldazagged is offline
Absent Comrade
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2013
Location: Louisville, KY, USA
Posts: 19,336
Likes: 53,737
Liked 38,386 Times in 11,801 Posts
Default

Quote:
Originally Posted by EFFIndustries View Post
What grips do you currently carry with? And thank you for the kind words!
You're welcome. For the last fourteen years I've used Pachmayr Compacs on a Model 640 in .38 Special. Cover the backstrap, cushion recoil, and give purchase for the little finger.
__________________
Oh well, what the hell.
Reply With Quote
  #52  
Old 01-29-2014, 12:56 PM
elm_creek_smith's Avatar
elm_creek_smith elm_creek_smith is offline
US Veteran
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2009
Location: Tulsa County
Posts: 2,413
Likes: 1,644
Liked 3,135 Times in 1,146 Posts
Default

Quote:
Originally Posted by EFFIndustries View Post
Bet those look good! We want to give you an option in the event you want to keep that set cleaner
A photo is posted a couple of places on this site and is my avatar. They are nice! Thanks.

I replaced the wood service grips because the horn grips are thicker and fill my palm better (big, bony hands). Thinner isn't always the best option.

ECS
__________________
CPT, Armor (Ret)
Luke 22:36
Reply With Quote
  #53  
Old 01-29-2014, 09:45 PM
GerSan69 GerSan69 is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Nov 2011
Location: metro Phoenix
Posts: 3,190
Likes: 16,361
Liked 3,959 Times in 1,601 Posts
Default

>What are you thinking in regards to the spacers?<
If you've ever seen the old Smith and Wesson grip adapter (the forerunner to the T-grip), it consists of two metal pieces that are the same shape as the grip panel, but extended into the space behind the trigger guard. (See the attached photo that I found on the internet.) My idea would be grip-shaped spacers, probably without the extended portion to keep from infringing on any patents (if they're still valid.) The spacers could be any thickness to increase the overall width of the grip, by a little or a lot. Include a new screw that's the proper length for the new width and there ya go.
Incidentally, NDZ Performance has several hundred logos, symbols, etc., that they laser engrave on billet parts.
Attached Images
File Type: jpg SWGRipADApter33qw17.0.jpg (20.4 KB, 91 views)

Last edited by GerSan69; 01-29-2014 at 09:47 PM.
Reply With Quote
  #54  
Old 02-03-2014, 12:00 AM
EFFIndustries's Avatar
EFFIndustries EFFIndustries is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Nov 2013
Location: Austin, TX
Posts: 39
Likes: 26
Liked 33 Times in 13 Posts
Default

Quote:
Originally Posted by shouldazagged View Post
You're welcome. For the last fourteen years I've used Pachmayr Compacs on a Model 640 in .38 Special. Cover the backstrap, cushion recoil, and give purchase for the little finger.
Got it. Thanks for the follow up

Quote:
Originally Posted by elm_creek_smith View Post
A photo is posted a couple of places on this site and is my avatar. They are nice! Thanks.

I replaced the wood service grips because the horn grips are thicker and fill my palm better (big, bony hands). Thinner isn't always the best option.

ECS
Agreed. It's why we intend to define the specific use scenario our products are meant to be applied to. The goal being to apply maximal utility and function to that role.

Quote:
Originally Posted by GerSan69 View Post
>What are you thinking in regards to the spacers?<
If you've ever seen the old Smith and Wesson grip adapter (the forerunner to the T-grip), it consists of two metal pieces that are the same shape as the grip panel, but extended into the space behind the trigger guard. (See the attached photo that I found on the internet.) My idea would be grip-shaped spacers, probably without the extended portion to keep from infringing on any patents (if they're still valid.) The spacers could be any thickness to increase the overall width of the grip, by a little or a lot. Include a new screw that's the proper length for the new width and there ya go.
Incidentally, NDZ Performance has several hundred logos, symbols, etc., that they laser engrave on billet parts.
These are pretty interesting! Just received the standard catalog of s-w. Going to spend some time doing research on these pieces. Appreciate you sharing!
__________________
Deep in the heart of TX
Reply With Quote
The Following User Likes This Post:
  #55  
Old 02-03-2014, 01:06 AM
PR24's Avatar
PR24 PR24 is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jan 2014
Location: Sunny AZ
Posts: 603
Likes: 185
Liked 693 Times in 292 Posts
Default

One word: OUCH!

Needs to be a bit more to hang onto.
Reply With Quote
  #56  
Old 02-03-2014, 01:29 AM
P&R Fan P&R Fan is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Dec 2009
Location: NE Iowa
Posts: 5,448
Likes: 1,950
Liked 3,491 Times in 1,286 Posts
Default

Quote:
Originally Posted by PR24 View Post
One word: OUCH!

Needs to be a bit more to hang onto.
I thought the same thing. With the M340 PD it is painful to shoot with full power Magnums, which are my carry load. I was shocked when it hurt slightly less.
I have had them on this revolver for a week or so.
I'm leavin' them on it.
Jim
Reply With Quote
The Following User Likes This Post:
  #57  
Old 02-03-2014, 02:05 AM
357-RevolverGuy's Avatar
357-RevolverGuy 357-RevolverGuy is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jan 2013
Location: North Carolina, USA
Posts: 1,469
Likes: 1,301
Liked 1,958 Times in 662 Posts
Default

EFF Industries just wanted to encourage you to keep pressing forward with this product. I think it looks great, it offers something unique and different, and looks to conceal well. With some thoughtful tweaks it could very well become a hit. I mean look at the 5 Star aluminum speed loaders for example. They were being done for decades by makers like HKS and Safariland, and even though the 5 Star aluminum can scratch the side of a revolver by accident, and rattle when carrying rounds, they still sell like crazy. No product is perfect. Sometimes it's just a small change that attracts people and caters to gun owners who want something different.

These grips may not be for everyone but I think one reason the J frame is so successful is that there are many hundreds of grips and grip makers out there available (it's one reason I chose the mod. 642 over a Ruger LCR... Ruger has had their snub on the market since 2009 and yet you can only find three types of grips for it today, and they are all horribly designed.) I say the more grip products out there, the more options we have to mod our revolvers.
__________________
Ephesians 6 (Armor of God)
Reply With Quote
The Following User Likes This Post:
  #58  
Old 02-09-2014, 01:06 AM
EFFIndustries's Avatar
EFFIndustries EFFIndustries is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Nov 2013
Location: Austin, TX
Posts: 39
Likes: 26
Liked 33 Times in 13 Posts
Default

Quote:
Originally Posted by 357-RevolverGuy View Post
EFF Industries just wanted to encourage you to keep pressing forward with this product. I think it looks great, it offers something unique and different, and looks to conceal well. With some thoughtful tweaks it could very well become a hit. I mean look at the 5 Star aluminum speed loaders for example. They were being done for decades by makers like HKS and Safariland, and even though the 5 Star aluminum can scratch the side of a revolver by accident, and rattle when carrying rounds, they still sell like crazy. No product is perfect. Sometimes it's just a small change that attracts people and caters to gun owners who want something different.

These grips may not be for everyone but I think one reason the J frame is so successful is that there are many hundreds of grips and grip makers out there available (it's one reason I chose the mod. 642 over a Ruger LCR... Ruger has had their snub on the market since 2009 and yet you can only find three types of grips for it today, and they are all horribly designed.) I say the more grip products out there, the more options we have to mod our revolvers.
I also believe that people gravitate towards what they want, and because of that, a multitude of options is ideal for the marketplace. Thank you also for the kind comments! Hope you try them out someday soon.

Quote:
Originally Posted by P&R Fan View Post
I thought the same thing. With the M340 PD it is painful to shoot with full power Magnums, which are my carry load. I was shocked when it hurt slightly less.
I have had them on this revolver for a week or so.
I'm leavin' them on it.
Jim
Jim, glad that after a week you still are reporting back with positive feedback. I feel like a majority of people would be surprised by the change in the recoil impulse.
__________________
Deep in the heart of TX
Reply With Quote
  #59  
Old 02-09-2014, 01:18 AM
EFFIndustries's Avatar
EFFIndustries EFFIndustries is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Nov 2013
Location: Austin, TX
Posts: 39
Likes: 26
Liked 33 Times in 13 Posts
Default First look

Here is a first look at the TyIII class I, black hardcoated JCGR's that we will be releasing soon. Running slightly behind the schedule we had quoted originally, but they are on the verge of being ready.

What do you all think of the color?

__________________
Deep in the heart of TX
Reply With Quote
  #60  
Old 02-09-2014, 02:37 PM
franzas's Avatar
franzas franzas is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jun 2013
Location: Richmond, VA
Posts: 587
Likes: 378
Liked 333 Times in 179 Posts
Default

Black looks good.

To go along with what the others say, give them some contour to fit the hand better and add some material behind the trigger guard. Essentially make an aluminum boot grip.

I would think a lot of people would be happy if they were relieved for speedloaders, but they may be thin enough where this might not be an issue.
__________________
an actual conservative
Reply With Quote
  #61  
Old 02-09-2014, 07:20 PM
ednblue's Avatar
ednblue ednblue is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2014
Location: Eastern PA
Posts: 24
Likes: 165
Liked 12 Times in 10 Posts
Default

Quote:
Originally Posted by EFFIndustries View Post
Here is a first look at the TyIII class I, black hardcoated JCGR's that we will be releasing soon. Running slightly behind the schedule we had quoted originally, but they are on the verge of being ready.

What do you all think of the color?

Now you are talking - I have a 442, and this will do the trick.

Let me know if you need a beta tester for this, if not let me know when I can order a set.

They look real good!
__________________
Freedom-Liberty-Peace
Reply With Quote
  #62  
Old 02-09-2014, 11:03 PM
GerSan69 GerSan69 is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Nov 2011
Location: metro Phoenix
Posts: 3,190
Likes: 16,361
Liked 3,959 Times in 1,601 Posts
Default

I like it! looks like a good option for in the pocket or even in the waist band. By the way, I'll give a +1 for an aluminum CNC'd boot grip.
Reply With Quote
  #63  
Old 02-26-2014, 04:23 PM
EFFIndustries's Avatar
EFFIndustries EFFIndustries is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Nov 2013
Location: Austin, TX
Posts: 39
Likes: 26
Liked 33 Times in 13 Posts
Default Black Hard coat Seconds

Ladies and gentlemen, just wanted to let you know we are selling the first sets of black anodized grips, at discount, as seconds.

FS Thread on SWF Classifieds
Purchase on our Website


Please note: The beveled edges of the grips show machine marks, vertical lines, that while anodized, still are not visually perfect. They almost have a pre-weathered look. The pictures presented here are of the grips in question; all sets appear identical as those displayed. The finish itself is not compromised whatsoever, and was done in an ISO 9001:2000 facility here in Texas. Thing is, we simply can't sell them at their intended MSRP when they are not cosmetically perfect.


__________________
Deep in the heart of TX
Reply With Quote
The Following User Likes This Post:
  #64  
Old 02-27-2014, 06:03 PM
Lobster Picnic Lobster Picnic is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Aug 2010
Posts: 1,560
Likes: 383
Liked 988 Times in 535 Posts
Default

I think the black looks better than the silver. Further thoughts:

Looking at the small wooden grips I use on my centennial J-frame, the width of them does swell to about as wide as the cylinder. I like the look of the rosewood and the roundness does help them fit my hand better, but it's clear that these alloy grips do make the handle significantly thinner. I'm not sure if that makes them easier to carry or to shoot, but I'm open to the concept of alloy grips in general. For a J-frame, I would likely be more interested in a design that fills the area behind the trigger guard.
Reply With Quote
  #65  
Old 03-30-2014, 08:10 AM
Dogmann's Avatar
Dogmann Dogmann is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2003
Location: Illinois
Posts: 955
Likes: 2
Liked 192 Times in 97 Posts
Default

The grips look interesting. Email sent!
Reply With Quote
  #66  
Old 03-30-2014, 11:27 AM
Kanewpadle's Avatar
Kanewpadle Kanewpadle is offline
US Veteran
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Nov 2009
Location: Wrong side of Washington
Posts: 10,167
Likes: 13,001
Liked 17,085 Times in 5,125 Posts
Default

I haven't read all the replies, but I think a two piece grip with a built in T-grip would sell better.
__________________
Life Is A Gift. Defend it!
Reply With Quote
  #67  
Old 03-30-2014, 11:44 AM
WC145's Avatar
WC145 WC145 is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Oct 2008
Location: Maine
Posts: 3,289
Likes: 3,076
Liked 3,828 Times in 851 Posts
Default

I can see how the slim profile might be a benefit for concealed carry but how are they for shooting? I understand that compromises often have to be made in the interest of concealment but they look like they'd be too small and thin to allow for a good grip unless you have tiny hands. My BUG is a custom 9mm 360J and I've had a set of CT LG105s on it for about 5 years now because they've worked out to be the best balance of size/bulk where concealment is concerned, while still providing a hand filling grip, the laser is a bonus.
__________________
Don't kiss smiling dogs!
Reply With Quote
  #68  
Old 07-09-2014, 11:32 PM
mrwilmoth mrwilmoth is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jun 2010
Posts: 18
Likes: 0
Liked 1 Time in 1 Post
Default

the all black look amazing!
Reply With Quote
  #69  
Old 07-10-2014, 12:19 AM
Dogmann's Avatar
Dogmann Dogmann is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2003
Location: Illinois
Posts: 955
Likes: 2
Liked 192 Times in 97 Posts
Default

Are those thinner in width then a standard OEM S&W magna wood panel grips?
Reply With Quote
  #70  
Old 07-12-2014, 04:05 PM
dr. K dr. K is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jul 2014
Posts: 226
Likes: 764
Liked 228 Times in 118 Posts
Default just got 'em

Hi! New forum member and inspired to joint because A) I'm addicted to j frames, and B) I wanted to post to this thread to do a quick review.

I ordered a pair of the factory seconds last week, got them darn near right away, and I have to say, I'm impressed. The fit is perfect, and if the finish on the seconds is "not cosmetically perfect," as EFF says, I'm inclined to believe the real deal, full-priced ones would be too nice to put on my little knock around 442.

Seems to be a bit of debate on why these are a good idea, so here's why I got 'em: I have medium sized hands, I like the original magna/service sized j frame grips, and I carry constantly. I've worn through some nice looking wood grips this way, chipping off splinters on the cheaper ones and flaking off finish on the nicer ones. Boot grips are great, but reaching into a pocket to grab a j frame with some styles of boot grip can be like an awkward handshake- I always feel like I have to readjust. These grips allow me to get the web between my thumb and index finger high up on the backstrap to lower the bore axis and give me better control for follow-up shots, and with my whole paw around these grips, there's no mistaking that I have the hold on the gun that works best for me. They shoot as well as could be expected with my preferred grip, but that's a moot point because this is the size of grip I always use an practice with. It's the material that really makes these great... No threat of splintering, no corroded or falling-off s&w logo disks, and while wood looks nice, really nice actually, these look and feel like they'll fit the role of a sturdy set of carry grips for a good long while. I like the look of an all black gun too... nothing wrong with saying they just kinda look cool in addition to the other benefits. I say well done.
Reply With Quote
The Following 4 Users Like Post:
  #71  
Old 07-12-2014, 05:56 PM
shouldazagged shouldazagged is offline
Absent Comrade
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2013
Location: Louisville, KY, USA
Posts: 19,336
Likes: 53,737
Liked 38,386 Times in 11,801 Posts
Default

Welcome to the forum, dr. K. Interesting review.
__________________
Oh well, what the hell.
Reply With Quote
  #72  
Old 07-19-2014, 12:29 PM
Shorty 45 MK2 Shorty 45 MK2 is offline
Banned
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: May 2014
Location: Central NC.
Posts: 3,207
Likes: 37,672
Liked 4,393 Times in 1,851 Posts
Default

Well, I been testing the Aluminum grips made by EFF Industries for a little over a week and I'm impressed with the build quality of them. Plus the matte black looks cool with the stainless steel.





For some back ground, I have only used the stock boot grips that came with my 642 as well as Pachmayr's Compac grips. (the latter mostly.)

The grips came with a pack of Vibra-tite VC-3 threadmate and a cool EFF Industries sticker.

I have pocket carried them in my front pocket in cargo pants, shorts and work pants, as well as some IWB carry.

These grips fit my 642-2 very well and were easy to install.

I have only shot 50 rounds with them on because of the weather/school and work. 15 of the rounds were Speer GD 135gr.+P the others being 130gr. standard pressure RN ammo.
With the GDs 7 were with a Tyler T grip and 8 without, the 642 was a little hard to hold on to with out the T grip when shooting the GD. I have Medium glove sized fingers, but Large sized glove palms, so my fingers could not grip very well with two hands. With the T grip I had no problem with the GDs, I knew when they went off, but nothing painful. If you have smaller side of average hands or at least palms they should fit you fine.







One con I found was speed loaders would sometimes catch on the edge of the grips, but most people who would want the type of deep concealment these grips offer would be using speed strips and this would be a non issue.

I feel these grips are best suited for tucked IWB carry since the widest part of the J-frame (the cylinder.) is hidden by your belt. I can bend over with the gun at the 3:30 position tucked IWB and these grips do not print hardly if at all.
They work well in pocket carry as well, but you still have the cylinder printing, although this is not really a problem for me.

Last edited by Shorty 45 MK2; 07-19-2014 at 02:26 PM. Reason: Typo
Reply With Quote
The Following 3 Users Like Post:
  #73  
Old 07-19-2014, 12:47 PM
Lobster Picnic Lobster Picnic is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Aug 2010
Posts: 1,560
Likes: 383
Liked 988 Times in 535 Posts
Default

These are the v2 black anodized grips from EFF. They are .259" wide instead of the .193" width of the v1.
They are still plenty thin. I have not shot with these grips yet, but since it's a .22 Magnum the recoil should be tolerable.

Reply With Quote
The Following 3 Users Like Post:
  #74  
Old 07-21-2014, 09:05 AM
DAMAN3691 DAMAN3691 is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jun 2014
Posts: 3
Likes: 0
Liked 4 Times in 2 Posts
Default My V1 Grips

These are my V1 grips that I just received. I love how thin and light they are. I am thinking of getting the V2 just because they are lighter.

https://www.dropbox.com/sc/we71syle7...-bk9bj7p4yYNea
Reply With Quote
The Following 2 Users Like Post:
  #75  
Old 07-21-2014, 12:36 PM
Waywatcher's Avatar
Waywatcher Waywatcher is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jan 2013
Location: Wisconsin
Posts: 1,652
Likes: 1,457
Liked 1,489 Times in 570 Posts
Default

I ordered a set last night; looking forward to giving them a try. I will post results and pictures when I get a chance to use them. I've tried quite a few different J frame grips, including: Pachmayr, Uncle Mikes, Hogue, Altamont, and the current factory boot. Still looking for the 'Cinderella slipper' set.
Reply With Quote
The Following 2 Users Like Post:
  #76  
Old 07-21-2014, 01:05 PM
macski222's Avatar
macski222 macski222 is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Mar 2012
Location: Mass
Posts: 372
Likes: 20
Liked 168 Times in 96 Posts
Default

Looking at those black grips makes me want to buy a 442 so I can get a pair. Some sharp looking grips. As if I didn't want to add a revolver to the stable already... now I have to look at this eye candy.
__________________
ChanceFavorsThe
Prepared Mind
Reply With Quote
The Following 2 Users Like Post:
  #77  
Old 07-21-2014, 03:04 PM
Shooting Padre's Avatar
Shooting Padre Shooting Padre is offline
US Veteran
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Apr 2010
Location: Northern Minnesota
Posts: 1,726
Likes: 569
Liked 1,235 Times in 475 Posts
Default

If a T grip could be incorporated into this grip as a single unit option, it would really be something. I like this product so far and I think it would serve a specific purpose for shooters. Good job, but think about the T grip style.
__________________
Endeavor to persevere. <><
Reply With Quote
The Following User Likes This Post:
  #78  
Old 07-21-2014, 09:31 PM
EFFIndustries's Avatar
EFFIndustries EFFIndustries is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Nov 2013
Location: Austin, TX
Posts: 39
Likes: 26
Liked 33 Times in 13 Posts
Default Order

Quote:
Originally Posted by Waywatcher View Post
I ordered a set last night; looking forward to giving them a try. I will post results and pictures when I get a chance to use them. I've tried quite a few different J frame grips, including: Pachmayr, Uncle Mikes, Hogue, Altamont, and the current factory boot. Still looking for the 'Cinderella slipper' set.
And it shipped this morning! Looking forward to hearing what you have to say about them.
__________________
Deep in the heart of TX
Reply With Quote
The Following User Likes This Post:
  #79  
Old 07-21-2014, 09:36 PM
EFFIndustries's Avatar
EFFIndustries EFFIndustries is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Nov 2013
Location: Austin, TX
Posts: 39
Likes: 26
Liked 33 Times in 13 Posts
Default

Quote:
Originally Posted by Shorty 45 MK2 View Post
Well, I been testing the Aluminum grips made by EFF Industries for a little over a week and I'm impressed with the build quality of them. Plus the matte black looks cool with the stainless steel.
For some back ground, I have only used the stock boot grips that came with my 642 as well as Pachmayr's Compac grips. (the latter mostly.)
...
I have pocket carried them in my front pocket in cargo pants, shorts and work pants, as well as some IWB carry.
These grips fit my 642-2 very well and were easy to install.
I have only shot 50 rounds with them on because of the weather/school and work. 15 of the rounds were Speer GD 135gr.+P the others being 130gr. standard pressure RN ammo.
With the GDs 7 were with a Tyler T grip and 8 without, the 642 was a little hard to hold on to with out the T grip when shooting the GD. I have Medium glove sized fingers, but Large sized glove palms, so my fingers could not grip very well with two hands. With the T grip I had no problem with the GDs, I knew when they went off, but nothing painful. If you have smaller side of average hands or at least palms they should fit you fine.

One con I found was speed loaders would sometimes catch on the edge of the grips, but most people who would want the type of deep concealment these grips offer would be using speed strips and this would be a non issue.

I feel these grips are best suited for tucked IWB carry since the widest part of the J-frame (the cylinder.) is hidden by your belt. I can bend over with the gun at the 3:30 position tucked IWB and these grips do not print hardly if at all.
They work well in pocket carry as well, but you still have the cylinder printing, although this is not really a problem for me.
Look forward to hearing more as you continue to test them, thanks. With the speed loader, are they snagging on that channel before the side bevel? Just curious.
__________________
Deep in the heart of TX
Reply With Quote
  #80  
Old 07-21-2014, 09:38 PM
EFFIndustries's Avatar
EFFIndustries EFFIndustries is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Nov 2013
Location: Austin, TX
Posts: 39
Likes: 26
Liked 33 Times in 13 Posts
Thumbs up

Quote:
Originally Posted by DAMAN3691 View Post
These are my V1 grips that I just received. I love how thin and light they are. I am thinking of getting the V2 just because they are lighter.

https://www.dropbox.com/sc/we71syle7...-bk9bj7p4yYNea
PM Me if you decide to get the V2.
__________________
Deep in the heart of TX
Reply With Quote
  #81  
Old 07-22-2014, 06:36 AM
Shorty 45 MK2 Shorty 45 MK2 is offline
Banned
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: May 2014
Location: Central NC.
Posts: 3,207
Likes: 37,672
Liked 4,393 Times in 1,851 Posts
Default

Quote:
Originally Posted by EFFIndustries View Post
Look forward to hearing more as you continue to test them, thanks. With the speed loader, are they snagging on that channel before the side bevel? Just curious.
Yes, when I slowly insert the speed loader it might catch about 1 in 10 times, but when I insert it faster it will catch about 1 in 3 time. Granted it might be just how I hold the speed loader.
Reply With Quote
  #82  
Old 07-25-2014, 12:59 AM
Waywatcher's Avatar
Waywatcher Waywatcher is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jan 2013
Location: Wisconsin
Posts: 1,652
Likes: 1,457
Liked 1,489 Times in 570 Posts
Default Got 'em. Tried 'em.



On to my thoughts:
--They are a snug fit at first. A lot like Ahrends grips. After taking them on and off a few times, they are much easier. The fit is good there.
--They are small. This should be obvious. The decreased size in the pocket is noticeable and nice.
--They are "blocky." And I shoot Glocks.
--They make it easy to draw from the pocket, as the hand can easily move around the aluminum without sticking, but the knurling still provides adequate grip.
--The finish on the grips is impeccable. Nicely done.
--The checkering provides adequate grip surface area, making rapid, aimed fire still possible.
--Recoil is not bad.
--They don't work well with HKS speedloaders. I took a picture of the bind:


--I would call the fit OK:


The jury is still out on these. I like how tough they will be, down the line. I like how small they are. I like that the draw is easy. I don't care for the blocky feel. I think the fit could be a bit better. I will probably go back to either the Hogue tamer, or uncle Mike's boot.

For a V3, if such a thing might happen, here's what I would suggest:
--End the checkering before the 'horn' part of the grip. The fingers don't grab there; the thumb sits there. A smoother surface would be preferable. Or maybe even delete the 'horn' and go old school.
--Slightly more round profile. This will eliminate the blocky feel, and I bet if it's done right, eliminate the binding spot with speedloaders.
--Slightly closer following of the curves on the backstrap.

Anyways, they're well made, obviously tough, and pretty good looking. I am looking forward to seeing what's next from EFF.

Last edited by Waywatcher; 07-25-2014 at 01:06 AM.
Reply With Quote
The Following 3 Users Like Post:
  #83  
Old 07-26-2014, 11:17 AM
Shorty 45 MK2 Shorty 45 MK2 is offline
Banned
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: May 2014
Location: Central NC.
Posts: 3,207
Likes: 37,672
Liked 4,393 Times in 1,851 Posts
Default

My opinion on these grips haven't changed much since I posted my first thoughts on them.

Shot additional 50 rounds with them on my 642 and you do start to feel the recoil, but these are made more for deep CC than for range shooting. I really like having the T grip with them when shooting as they seem make it easier to hold on to them when shooting at some speed.

The finish still looks brand new and while I did not abuse them I don't baby them either.

The only thing I don't like about them is with HKS and Dade speed loaders tend to catch on the front lip of the grips, but most people who would want this type of deep concealment grip would most likely be using speed strips.

I would highly recommend these grips to anyone looking for deep concealment grips.

Shorty.
Reply With Quote
The Following User Likes This Post:
  #84  
Old 07-26-2014, 11:25 AM
shawn mccarver shawn mccarver is offline
SWCA Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Aug 2005
Posts: 7,903
Likes: 3,511
Liked 6,720 Times in 2,615 Posts
Default

These grips need to have a filler behind the trigger guard to make the grips similar in profile to what you would have if you had S&W Magna grips plus a grip adapter, or a Boot Grip. And, I like the suggestion of stopping the checkering lower to match the way factory grips are checkered. I also think there is no reason grips such as these should bind with any type of loading device, whether that be a speedloader, speed strip or whatever. Just my thoughts.

Last edited by shawn mccarver; 07-26-2014 at 11:31 AM.
Reply With Quote
The Following User Likes This Post:
  #85  
Old 08-04-2014, 08:20 AM
DAMAN3691 DAMAN3691 is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jun 2014
Posts: 3
Likes: 0
Liked 4 Times in 2 Posts
Default

I had these out in the pouring rain this weekend and shot 300 rounds of 38+P through my 340. These grips were easy to hold and control during firing. I swapped my Delta Ergo grip and Desantis Clip Grip just to compare, and these are definitely my favorite. I love the thin grip of the V1 and would buy another set in the same width if they were the same weight or lighter than the V2. Since I pocket carry these, I just don't want to add any bulk. I would also like the grips more if the top of the grips curved downward similar to the stock grips. I shoot both left and right handed and my I think it would be better if my thumbs rested above the grips directly on the frame.
Reply With Quote
The Following 2 Users Like Post:
  #86  
Old 08-04-2014, 01:29 PM
Alpha Sierra Alpha Sierra is offline
Banned
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jul 2014
Posts: 124
Likes: 65
Liked 89 Times in 40 Posts
Default

Quote:
Originally Posted by hotrod150 View Post
Based on your photos, your grips appear to be too thin, not hand-filling enough. They also need some filler in front of the grip frame, ala grip adapter or boot grip. And lastly, they are ugly. Butt ugly.
Sorry, but you asked for imput, and these three things come to mind every time I look at your ad in the classifieds.
You might think about producing a "boot grip", but using CNC-machined aluminum instead of wood or lastic/rubber.
All of the above +1
Reply With Quote
  #87  
Old 08-07-2014, 04:18 PM
elm_creek_smith's Avatar
elm_creek_smith elm_creek_smith is offline
US Veteran
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2009
Location: Tulsa County
Posts: 2,413
Likes: 1,644
Liked 3,135 Times in 1,146 Posts
Default

Any thought of a V3 with the checkering stopped lower and the top part of the grip more gently rounded to avoid speedloaders? I use speedstrips in drop pouches all the time, but when wearing a jacket or sportcoat I'll drop a couple of speedloaders in the pockets. I would just use the grip adapters that I use with the wooden magna grips.
__________________
CPT, Armor (Ret)
Luke 22:36

Last edited by elm_creek_smith; 08-07-2014 at 04:19 PM.
Reply With Quote
The Following User Likes This Post:
  #88  
Old 08-07-2014, 04:35 PM
BAM-BAM BAM-BAM is offline
Member
 
Join Date: Oct 2005
Location: A Burb of the Burgh
Posts: 14,726
Likes: 1,594
Liked 19,805 Times in 8,757 Posts
Default

Quote:
Originally Posted by sipowicz View Post
Something along the lines of an integrated tyler t-grip would work great...

Sipo; my thoughts exactly.......... a thin "boot grip"
Reply With Quote
The Following User Likes This Post:
  #89  
Old 08-07-2014, 11:12 PM
EFFIndustries's Avatar
EFFIndustries EFFIndustries is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Nov 2013
Location: Austin, TX
Posts: 39
Likes: 26
Liked 33 Times in 13 Posts
Default Some catching up

Been busy around here. Wanted to thank everyone for their comments and continued feedback. Second round of testers will be getting PMs/Emails tomorrow to have eval units sent out.

Quote:
Originally Posted by Waywatcher View Post

The jury is still out on these. I like how tough they will be, down the line. I like how small they are. I like that the draw is easy. I don't care for the blocky feel. I think the fit could be a bit better. I will probably go back to either the Hogue tamer, or uncle Mike's boot.

For a V3, if such a thing might happen, here's what I would suggest:
--End the checkering before the 'horn' part of the grip. The fingers don't grab there; the thumb sits there. A smoother surface would be preferable. Or maybe even delete the 'horn' and go old school.
--Slightly more round profile. This will eliminate the blocky feel, and I bet if it's done right, eliminate the binding spot with speedloaders.
--Slightly closer following of the curves on the backstrap.

... I am looking forward to seeing what's next from EFF.
Waywatcher: Thank you for the time to offer up all the comments. As Shorty and shawn mccarver also noted, it seems like more of you would be using these with speed loaders than we had anticipated. As shawn said, there is no real reason these should bin when using those devices.

Quote:
Originally Posted by DAMAN3691 View Post
I had these out in the pouring rain this weekend and shot 300 rounds of 38+P through my 340. These grips were easy to hold and control during firing. I swapped my Delta Ergo grip and Desantis Clip Grip just to compare, and these are definitely my favorite. I love the thin grip of the V1 and would buy another set in the same width if they were the same weight or lighter than the V2. Since I pocket carry these, I just don't want to add any bulk. I would also like the grips more if the top of the grips curved downward similar to the stock grips. I shoot both left and right handed and my I think it would be better if my thumbs rested above the grips directly on the frame.
Very interested to hear more about the rain trip. Were you wearing gloves at the time? As far as thumb purchase, you are suggesting removing the horn essentially?

Quote:
Originally Posted by elm_creek_smith View Post
Any thought of a V3 with the checkering stopped lower and the top part of the grip more gently rounded to avoid speedloaders? I use speedstrips in drop pouches all the time, but when wearing a jacket or sportcoat I'll drop a couple of speedloaders in the pockets. I would just use the grip adapters that I use with the wooden magna grips.
The speedloader issue will be addressed down the pipeline. Meanwhile, we are working on turning out another project. Thank you for letting us know that this is also something you are looking out for.

Quote:
Originally Posted by Alpha Sierra View Post
All of the above +1
Can't do anything about you thinking they are ugly :P but, I'd wager they are not nearly as 'not hand-filling' as you think. I have pretty large hands myself and these run very well for me. Still, we want to hear it all, the good and the bad! Honesty trumps all.
__________________
Deep in the heart of TX
Reply With Quote
The Following User Likes This Post:
  #90  
Old 08-11-2014, 01:33 PM
Dogmann's Avatar
Dogmann Dogmann is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2003
Location: Illinois
Posts: 955
Likes: 2
Liked 192 Times in 97 Posts
Default

Can you make K frame RB grips?..
Reply With Quote
  #91  
Old 08-11-2014, 03:14 PM
357-RevolverGuy's Avatar
357-RevolverGuy 357-RevolverGuy is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jan 2013
Location: North Carolina, USA
Posts: 1,469
Likes: 1,301
Liked 1,958 Times in 662 Posts
Default

Quote:
Originally Posted by Dogmann View Post
Can you make K frame RB grips?..
^ I'll 2nd this. If priced the same I would be interested in getting sets for both round and square butt K frame.
__________________
Ephesians 6 (Armor of God)
Reply With Quote
  #92  
Old 08-17-2014, 12:58 AM
Dogmann's Avatar
Dogmann Dogmann is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2003
Location: Illinois
Posts: 955
Likes: 2
Liked 192 Times in 97 Posts
Default

I just got a pair of each today V1&V2. Testing has started
Reply With Quote
  #93  
Old 08-18-2014, 12:47 AM
mc5aw's Avatar
mc5aw mc5aw is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2008
Location: The free state of PA
Posts: 5,224
Likes: 5,721
Liked 8,584 Times in 2,782 Posts
Default

A bit late to post, but here are my thoughts on the test set I received several weeks ago ... (I will post pix tomorrow). I used the EFF grip on a Model 60 and 37, and fired 158g .38 Specials from each.

THE GOOD

The grip panels are each ~ .5 cm in width, making the total width (minus the revolver backstrap) ~ 1.0 cm, and extremely lightweight. The panels are nicely crafted, featuring subtle checkering and clean edges. The matte black color matches well with a stainless revolver or matte black model like my 37. Although virtually weightless, the panels feel solid, and are obviously quality manufactured. Overall fit was good, as was feel. Aesthetically, EFF grips are very nice.

THE BAD

As each panel is metal, there is no recoil absorption capacity ... NONE. Firing the 60 was not too problematic, but the 37 felt as if I was holding a bare frame with standard 158s. I imagine +Ps or .357s would be brutal. Even hardwood has a modicum of absorption capability, thus EFF grips are not for the recoil sensitive. Additionally, due to the slim profile, a BK grip adapter would be a very practical addition for a stronger gripping platform.

***Note: The grip panels came with a small packet of VC-3 Threadmate (similar to Loktite) for the attachment screw. After experiencing the recoil of the 37 with the EFF grip in place, the Threadmate is a very wise idea. I believe the grip screw would work itself loose in relatively short time without some adhesive keeping it anchored.

THE UGLY

I believe EEF grips are priced ~ $55, making them roughly 2x the standard Hogue or Pachmayr, and in line with most standard wood grips. Add in a BK adapter, and you've got a J-frame with ~ $90 worth of non-exotic wood or custom maker grip to hang onto. For me, that's a lot of $ to invest in my CCW grip ... I'm partial to contoured Hogues and Pachs for comfort and shootability, not necessarily $.

POINTS TO CONSIDER

-Because of the lack of recoil absorbing qualities, the EFF grip panels might benefit from a rubber insert (similar to a gasket). If cut to fit within each panel, an insert would add no width to the grip profile, but would help displace recoil energy, especially with Airweight and AirLite revolvers.

-I'm also curious about reaction to temperatures. As the EFF grip is metal, would it retain heat if the summer sun shone down on it for hours as I worked outside, hiked, etc.? Similarly, in colder weather, would it get frosty to the touch? (Weather conditions for my testing were mild, and I did not have the opportunity to use the grip in rain, so I cannot comment on it reacting to water and becoming slippery).

CLOSING THOUGHTS

The EFF grip is a well-thought out and nicely crafted accessory for J-frame revolvers. It has some shortcomings for potential buyers to address, primarily with respect to recoil. Aesthetically, I give this product a solid A/A-, while practical use-wise I give it a B/B-. It's not going to appeal to everyone, but for those who want a stylish yet understated grip, it is worth considering.
__________________
I'm with the banned ...
Reply With Quote
The Following 5 Users Like Post:
  #94  
Old 08-18-2014, 01:26 PM
shouldazagged shouldazagged is offline
Absent Comrade
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2013
Location: Louisville, KY, USA
Posts: 19,336
Likes: 53,737
Liked 38,386 Times in 11,801 Posts
Default

Good, well-thought-out review.

My buggered-up old hands would have a problem with the recoil factor with SD ammo, so I'll stick with my Pachmayr Compacs; but this has helped me firm up my decision.
__________________
Oh well, what the hell.
Reply With Quote
  #95  
Old 08-18-2014, 03:57 PM
Lobster Picnic Lobster Picnic is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Aug 2010
Posts: 1,560
Likes: 383
Liked 988 Times in 535 Posts
Default

RANGE REPORT:

I have the v2 Black EFF grips on my .22 Magnum 351c. I ran 93 rounds through the gun today and they worked pretty well. The checkering works very well to keep the gun from slipping. Recoil was about the same as with wooden grips, tolerable. With rubber boot grips, the recoil is very mild.

My accuracy was about normal with these grips. I do think they are too squared-off at the edges. A more rounded design would feel better in the hand and would be slightly smaller & lighter than the current design(s). Also, I will repeat the suggestion that some future design should be offered which fills the area behind the trigger guard.

For now, I'm happy with the v2 design and will use it for carry. It works well in the pocket and is grippier than the smooth wooden grips I used previously.
Reply With Quote
  #96  
Old 08-22-2014, 10:59 AM
elm_creek_smith's Avatar
elm_creek_smith elm_creek_smith is offline
US Veteran
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2009
Location: Tulsa County
Posts: 2,413
Likes: 1,644
Liked 3,135 Times in 1,146 Posts
Default

Quote:
Originally Posted by Lobster Picnic View Post
It works well in the pocket and is grippier than the smooth wooden grips I used previously.
Whatcha gonna do with those "...smooth wooden grips...?"
__________________
CPT, Armor (Ret)
Luke 22:36
Reply With Quote
  #97  
Old 08-22-2014, 04:24 PM
Lobster Picnic Lobster Picnic is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Aug 2010
Posts: 1,560
Likes: 383
Liked 988 Times in 535 Posts
Default

Quote:
Originally Posted by elm_creek_smith View Post
Whatcha gonna do with those "...smooth wooden grips...?"
I was going to trade them for some smooth RB Bonded Ivory grips - got any?
Reply With Quote
  #98  
Old 08-22-2014, 07:45 PM
elm_creek_smith's Avatar
elm_creek_smith elm_creek_smith is offline
US Veteran
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Feb 2009
Location: Tulsa County
Posts: 2,413
Likes: 1,644
Liked 3,135 Times in 1,146 Posts
Default

No, but I have some black buffalo horn grips that need to be fitted.
__________________
CPT, Armor (Ret)
Luke 22:36
Reply With Quote
  #99  
Old 03-01-2016, 06:17 AM
warag warag is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Mar 2016
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

Hi guys, I'm looking for some super compact j-frame grips for my 642 and finaly found these, which look perfect to me. But the EFF industries looks to be out of business and I haven't found a single website to buy them from.

So I'm trying this last desperate options: Is any of the lucky owners of these grips willing to sell them? If so, please offer me your price.
Reply With Quote
  #100  
Old 06-02-2016, 09:32 PM
RavagePrime RavagePrime is offline
Member
New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback! New Product: Concealable Aluminum Grips for J-Frame Revolvers | Need Feedback!  
Join Date: Jun 2016
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

I'm trying to find a pair too!
Reply With Quote
Reply

Tags
grips, j frame

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB - Eff V2 Aluminum Grips for J-frame Aggie DRK WANTED to Buy 9 06-13-2016 11:45 AM
Any feedback on Crimson Trace laser sight grips for N frame? Mr.Harry S&W Revolvers: 1980 to the Present 0 04-12-2016 09:13 PM
EFF Ind. Aluminum J-Frame Grips V2 | changes from YOUR input EFFIndustries S&W Revolvers: 1980 to the Present 16 07-08-2014 07:30 PM
EFF Ind. Aluminum J-Frame Grips V2 | changes from YOUR input EFFIndustries Concealed Carry & Self Defense 0 07-03-2014 08:27 AM
"Most concealable" square-butt K frame grips? moonshine44 Concealed Carry & Self Defense 15 06-13-2013 01:09 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 05:26 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)