Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >


Reply
 
Thread Tools Display Modes
  #1  
Old 07-08-2017, 01:20 AM
t3hgruu t3hgruu is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Nov 2016
Posts: 13
Likes: 0
Liked 3 Times in 1 Post
Default 3" 686 for carry

Hello, I am thinking that my next handgun purchase will be a 3" 686 plus. I just wanted to hear from some others that carry one.

My current carry gun is normally a Government or Commander 1911 which is carried IWB. I live in Texas and carry the stainless in the summer and the blued one in the winter. I know a steel revolver will be heavy, but I am not concerned about that, I carry 1911s as mentioned.

I have a 4" 686 currently and am thinking a 3" would be a little more handy for day to day carry. What are some grip and holster recommendations that you actually use? I would like to find a compact grip that would still let me get a full grip and not require me to tuck my pinky finger underneath.

Also, how does it carry compared to a 1911 as far as concealment? We have open carry here so I am not concerned about a little printing, however I would like to be discreet too. The only revolver that I carry so far is an LCR and that one goes on my hip on the way to work and mainly only gets worn when I make a stop on the way home.

I have some time to shop around for a holster and grips as I more than likely won't be getting this until the end of this year or early next year. Thanks in advance.
Reply With Quote
  #2  
Old 07-08-2017, 03:33 AM
cd228 cd228 is offline
Member
 
Join Date: May 2007
Location: working for Uncle Sam
Posts: 18
Likes: 2
Liked 6 Times in 3 Posts
Default

I've got a 4 inch Square butt 686-3 that I've CC in Northern NY during the winter under a heavy jacket. The 686 is a service size pistol, concealment wasn't it's main design idea. But, you already CC a 1911, so you are used to hiding a service sized pistol.

I'd recommend a good pancake holster, I use desantis but galco and several others offer quality ones too. You'll need a cover garment if you go that route and you might want to go with a higher riding holster so the barrel doesn't stick out so far. I also tried a blade tech kydex, but it sat way low and was really bulky. it was great on the range though. i'd continue to poll the membership and see if folks like/recommend an IWB which IMHO might be easier to hide but less comfortable.

On grips, I'd make sure to get a round butt. I use hogues but also look at the Pachmyer compacs as well.
Reply With Quote
  #3  
Old 07-08-2017, 06:00 AM
getoff getoff is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Aug 2011
Location: at my house
Posts: 1,347
Likes: 828
Liked 394 Times in 222 Posts
Default

Iv'e been carrying a 681 4" that I round butted in a Milt Sparks VMII lately. same size/weight. VZ makes some of the best grips for guns imho. i have a set on my 681 and a couple Safariland comp. III's for reloads. weight is not an issue to me, as I too carried a 5" 1911 for years. only thing i ran up against, room in my pants/shorts. went on vacation and packed on a couple of lbs. and now its a bit snug!
__________________
why? why not?
Reply With Quote
  #4  
Old 07-08-2017, 07:11 AM
Wee Hooker Wee Hooker is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Mar 2003
Location: New England, USA
Posts: 3,213
Likes: 1,755
Liked 2,043 Times in 862 Posts
Default

I've got a 3" 686+ ( Talo 3-5-7 series) and love the gun for it's shooting characteristics. I'm not dedicated enough to carry anything that size and weight though. That said, I find the factory grips to be pretty decent and good looking . I think it would be a good pick . The 686+ pro also has a decent factory grip and shaves a few ounces off the guns weight .
Good luck in your search!
__________________
Dave
Reply With Quote
  #5  
Old 07-08-2017, 08:09 AM
BAM-BAM BAM-BAM is offline
Member
 
Join Date: Oct 2005
Location: Western Pa.
Posts: 7,290
Likes: 154
Liked 8,039 Times in 3,848 Posts
Default

Best all around revolver I own is probably a 4" round butt 686...... but for all day concealed carry ......... make mine a 3" K-frame.

I had a 3" 586...... just to bulky and heavy for all day carry IWB...IMO

Remember we're talking carried a lot and hopefully never shot................

If I thought it was SHTF...................... hi-cap 9mm
Reply With Quote
  #6  
Old 07-08-2017, 09:00 AM
lrrifleman's Avatar
lrrifleman lrrifleman is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Oct 2015
Location: Southern NJ
Posts: 2,572
Likes: 2,754
Liked 1,287 Times in 714 Posts
Default

@OP,

Like you, I am in the planning stage. I have a 686+ 3" on order. When the current dust settles, I expect my rotation will focus on a Mauser HSc, a 686+ 3", and a Commander.

For the 686, I like the factory grips at the moment, and plan to get a second set. For leather, I am pretty much focused on a Galco Combat Master holster, or same style if I see one from a different manufacturer.

How it carries, I can't answer. However, when I do carry my Chief's 36-6 (a J frame identical twin to the 3" 686), that carries quite comfortably OWB, and it really depends on the holster for IWB.
__________________
Judge control not gun control!
Reply With Quote
  #7  
Old 07-08-2017, 09:07 AM
BB57's Avatar
BB57 BB57 is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Feb 2015
Location: Eastern NC
Posts: 1,340
Likes: 523
Liked 2,713 Times in 871 Posts
Default

I can't speak to a 3" 686+, but I do carry a 2 1/2" 686+, primarily in the winter.

Fully loaded it is 40 oz - on par with a steel framed full size 1911, but heavier than the 31 oz LW Commander I often carry in the summer (my usual summer pistol is a 30.5 oz S&W 6906).

If you choose a decent IWB holster, you'll find the 3" 686+ will be very concealable - more so than a full size or Commander sized 1911, and will be more comfortable to carry as the hammer on the 686+ doesn't rub on you like the hammer on a 1911 can.

I use a Wild Bill's Concealment Covert Carry IWB holster, for both my 2 1/2" Model 66 (36 oz) and my 2 1/2" 686+. The website lists it as made to order with an 8-10 week delivery time, but I've never had WBC take more than 3 weeks for an MTO item and the little brown truck usually brings in about 2 weeks. Summer is also their slow time, so MTO items should be quick.

This particular model uses an offset belt clip that keeps the overall profile thin, and the resulting wider surface makes it very comfortable. It's also a tuckable design if you need to tuck in shirt. As you can see the holster below is sized for my 3" Model 13, but works fine with the 2 1/2" revolvers.





I've also carried a 3" Model 13, and I can state that the extra 1/2" of barrel makes no difference at all in comfort or concealment. 3" does allow a little more velocity from a .357 Magnum, particularly if you are using a load optimized for a longer barrel.

L and K frame sized revolvers like the 686+, Speed Six and Model 66 below all conceal better than you'd think, particularly with a compact grip, as the maximum width only exists in the cylinder, with the barrel and grip frame being substantially thinner than a 1911 over all.

I'm a big fan of Pachmayr's Compact grip on this class of revolver as it conceals well, yet is still comfortable and controllable to shoot with .357 Magnum self defense loads.


Last edited by BB57; 07-08-2017 at 09:09 AM.
Reply With Quote
  #8  
Old 07-08-2017, 09:08 AM
blues7's Avatar
blues7 blues7 is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Dec 2015
Location: Blue Ridge Mtns
Posts: 1,093
Likes: 712
Liked 1,978 Times in 671 Posts
Default

I don't carry mine often but do so occasionally AIWB with either a leather Triple K holster or a kydex holster from JM Custom Kydex. It wears and conceals surprisingly well imho.

For most day to day carry, however, I generally carry one of my other semi autos or a 642-1.
__________________
3" 686+, 642-1, M&P15 TS
Reply With Quote
  #9  
Old 07-08-2017, 09:17 AM
Enzo's Avatar
Enzo Enzo is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Apr 2012
Location: Massachusetts
Posts: 151
Likes: 38
Liked 47 Times in 27 Posts
Default

I have a 686+, 3" talo edition
The Scopesmith The Gun Room— — Back in Stock TALO Model! Smith & Wesson 150713 Model 686 Deluxe 357 Mag 3in 7rd – Adjustable White Outline/Red Ramp Sights Stainless Steel – Satin Finish – Textured wood grips
and carry owb in a Lobo Leather enhanced pancake holster with a thumb break.
Enhanced Pancake – Welcome to Lobo Gun Leather
I think the 3" is the perfect carry size and imo, nothing beats 7 rounds of .357

Last edited by Enzo; 07-08-2017 at 09:24 AM.
Reply With Quote
  #10  
Old 07-08-2017, 09:56 AM
DD357 DD357 is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Aug 2004
Location: Morgan Co, IN
Posts: 568
Likes: 375
Liked 386 Times in 223 Posts
Default

I have carried snub K's and L's and I much preferred the K's. Sold both my 2.5 & 3 inch L's a long time ago - don't miss them.
__________________
K & N S&W revolvers
Reply With Quote
The Following User Likes This Post:
  #11  
Old 07-08-2017, 10:10 AM
Lostaro Lostaro is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Dec 2015
Location: SW VA
Posts: 92
Likes: 25
Liked 107 Times in 55 Posts
Default

I carry a 3" GP100 in a Simply Rugged pancake...works great, conceals great.

Also carry my 4" 686 in a Remora, even for a full size gun it hides rather well.
Reply With Quote
  #12  
Old 07-08-2017, 01:23 PM
Brasky Brasky is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Aug 2014
Posts: 557
Likes: 156
Liked 534 Times in 224 Posts
Default

Go shoot the 1911 and 686 without ear protection and your favorite carry loads and see which one you still want to carry
Reply With Quote
  #13  
Old 07-08-2017, 03:17 PM
Retired Chief Retired Chief is offline
US Veteran
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Nov 2015
Location: Central Illinois
Posts: 108
Likes: 16
Liked 256 Times in 70 Posts
Default

I carry either a Star PD in .45 ACP or a Mod 66, 2&1/2 inch barrel, round butt, Pacmeyer grips in custom made shoulder holsters. Conceals nicely in cool or cold weather, and either a lite vest or a light-weight sport coat in warm weather. As I spend a lot of time in a vehicle, the shoulder holster is more comfortable and offers easy access while sitting. (A retired trooper went into leather work when he got bored, and my last custom holster for the Star, including two mag pouches and a handcuff carrier cost $70. Rodek Leather Works, Inc.)
Reply With Quote
  #14  
Old 07-08-2017, 03:37 PM
bigwheelzip's Avatar
bigwheelzip bigwheelzip is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Dec 2014
Location: Upstate SC
Posts: 5,397
Likes: 5,561
Liked 11,107 Times in 2,935 Posts
Default

My husband and I both occasionally carry a 2 1/2 and 3" 686+, mostly for woods walks or when bears are sighted in the area. In a Sourdough Pancake and Galco Combat master. The stock grip on the 3" is good and a Hogue Bantam is a good alternate that's a bit smaller.

Grips L to R: Stock 3", Hogue Bantam, Stock 4"

Reply With Quote
  #15  
Old 07-08-2017, 04:01 PM
Walkingwolf Walkingwolf is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Apr 2017
Posts: 398
Likes: 289
Liked 280 Times in 174 Posts
Default

For me I prefer nothing less than 4 inch. As a LEO I could conceal a 4 inch IWB just as well as a 2 inch. Did not make sense giving up the one, or two inches. Pocket backup though had to be no more than a two inch.

I have only a couple three inch revolvers, a Charter Arms bulldog, and a 1851 Navy avenging angel. They sit in the safe most of the time. Carry for rotates between several 4 inch DA revolvers. Only snub I carry regularly is a NAA mini revolver in my pocket.
Reply With Quote
  #16  
Old 07-08-2017, 04:02 PM
jimmyj's Avatar
jimmyj jimmyj is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: May 2003
Location: DUNNELLON, FLORIDA USA
Posts: 7,871
Likes: 841
Liked 6,943 Times in 2,173 Posts
Default

In my younger life pre-chemo I CCW a S&W Model 29 4" or 6"plus four speed loaders.

Currently I CCW a Glock with a extra magazine plus a S&W "J" Frame
Reply With Quote
  #17  
Old 07-08-2017, 04:10 PM
Walkingwolf Walkingwolf is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Apr 2017
Posts: 398
Likes: 289
Liked 280 Times in 174 Posts
Default

Quote:
Originally Posted by jimmyj View Post
In my younger life pre-chemo I CCW a S&W Model 29 4" or 6"plus four speed loaders.

Currently I CCW a Glock with a extra magazine plus a S&W "J" Frame
Currently I have been carrying my model 21, and a peacemaker clone. But I can get away with it here in NC as OC is a protected right. The NAA though never leaves my pocket no matter what I am carrying, sometimes my only carry depending.
Reply With Quote
  #18  
Old 07-09-2017, 01:43 AM
t3hgruu t3hgruu is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Nov 2016
Posts: 13
Likes: 0
Liked 3 Times in 1 Post
Default

Quote:
Originally Posted by Brasky View Post
Go shoot the 1911 and 686 without ear protection and your favorite carry loads and see which one you still want to carry
Lol I actually have shot a 686 I owned years back as well as 1911s without ear pro, I also put a couple of cylinders of .357 through my LCR with naked ears. We all do dumb things right? If I had to to risk rank my concerns of hearing loss during a SD situation I can say that would be at the bottom of the list.

To everyone else, thanks for your replies and especially for the photos! Pictures are worth a thousand words. I was looking at the Hogue bantams, however I am concerned the rubber grips my cause my shirt to stick and ride up a little. I am personally not too big of a fan of the stock grips that came on my 4" 686 and my Governor. Those finger grooves are just in the wrong place for my hands.

I have a couple of High Noon down under holsters that I use for my 1911s. I like the looks of the leather one with the clip. I have a kydex holster that I use occasionally if I know I'm going someplace where carry is a legal no no. It's easy to take on and off but not very comfortable.

I am wanting to have a good revolver as an option to remove some magazine and ammo concerns. Maybe since I am starting to push 40 I am realizing that sometimes it's better to keep things simple.
Reply With Quote
  #19  
Old 07-09-2017, 04:47 AM
Mehutch's Avatar
Mehutch Mehutch is online now
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Oct 2015
Location: Seattle Washington
Posts: 360
Likes: 1,710
Liked 1,023 Times in 249 Posts
Default

A half inch here, a half inch there.... my 686+ with 2.5" barrel is just fine. And I think that your intended target wont know if it came from a 2.5" or a 3" barrel.

Reply With Quote
The Following 5 Users Like Post:
  #20  
Old 07-09-2017, 05:31 AM
t3hgruu t3hgruu is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Nov 2016
Posts: 13
Likes: 0
Liked 3 Times in 1 Post
Default

That's an awesome picture.
Reply With Quote
  #21  
Old 07-09-2017, 08:09 AM
forrestinmathews forrestinmathews is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Dec 2009
Posts: 809
Likes: 258
Liked 507 Times in 255 Posts
Default

Mostly people find two things about a specific revolver that work for them: barrel length and frame size. Find out if you're a K, L, or N frame guy. Then find out what your barrel length is. For example I do well with a 4" or 6" in N frame, but can't do anything with a 5". It doesn't balance well and I have trouble finding the front sight. The extra round is a joke. It confines you to HKS or maxfire speedloaders or you go the moonclip route. You're actually slower than a six shot to reload. We found out that the break even point for the slower reload is actually eight shots. If you're going to stay with speedloaders the Safariland Comp 3 cannot be beaten in a 2.5" K frame model 66. It's the fastest speedloaders and gun combination.
__________________
This≠DodgeCity&You≠BillHickok
Reply With Quote
  #22  
Old 07-09-2017, 08:53 AM
Bugkiller99's Avatar
Bugkiller99 Bugkiller99 is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Mar 2013
Location: North Florida
Posts: 1,563
Likes: 2,031
Liked 1,587 Times in 752 Posts
Default

Texas Gun Leather makes a IWB holster that spreads the weight around, increasing comfort. I'll carry my 686 4" on hikes and camping using it.
__________________
Reg. Magnum wants/Rossi wallet
Reply With Quote
  #23  
Old 07-09-2017, 11:17 AM
L-2's Avatar
L-2 L-2 is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Oct 2006
Location: California/Nevada
Posts: 71
Likes: 81
Liked 71 Times in 29 Posts
Default

Browse By Gun
I'm using a Galco "Speed Paddle" for my 3" L-frame.
If you go to Galco's website, it has others which will work with your anticipated 3" 686+.

As shown, I usually have a Pachmayr brand grip on my revolvers, but do have other brands, like Hogue or the supplied ones from S&W, which I'll put on for some variety.
Attached Thumbnails
3" 686 for carry-586lcomp_10-jpg  
__________________
66-2/642-1/640Pro/627Pro/LComp

Last edited by L-2; 07-09-2017 at 11:21 AM.
Reply With Quote
  #24  
Old 07-09-2017, 01:14 PM
iPac's Avatar
iPac iPac is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Mar 2015
Posts: 473
Likes: 585
Liked 578 Times in 223 Posts
Default

I think a 3" 686 would be a great carry gun. However, everyone is different so you need to figure out if one would work for you specifically.

I prefer a larger frame. I used to carry a 2" Detective Special, which is Colt's D frame, but wanted a slightly bigger gun with more power. So I upgraded to the 2.5" Python which is on the I frame, about equal to S&W's L frame. I love the snub Python for carry, it is perfect for me, the size, the weight, the power.

Hindsight is 20/20, and if I had to do it all over again, I probably would have gotten a 4" Python instead. Would have been cheaper for starters, but would also have given me better accuracy and more velocity. I like my snubby though. A 3" Python would have been perfect, but obtaining one of those for a realistic price is unrealistic.

So a 3" 686 would work great for someone like me. In fact, I considered a 2.5" 686 but I am really anal about action design and dedicated to the Colt V spring. I would take some time to think it over and decide on what exact configuration fits your bill. An inch or so barrel difference doesn't make much difference on guns of the same frame size when it comes to carrying or concealing. So I wouldn't rule out a 4", or even 2.5" the other way.

For combat shooting, I got combat grips from Karl Nill. They are expensive, but they are one of the highest quality grips I have seen. The fit is amazing on my Python. They are designed specifically for shooters and make the gun point fantastic when combat shooting (no sights).

For holster, I just have a Bianchi Accumold right now. It was cheap and actually gives a nice high ride OWB which is concealable. The holster covers most of the gun's frame to protect it, which I require for nice guns. Eventually I plan to get a Galco or Desantis combat leather for high ride OWB carry. I go with OWB so the gun is always easy to draw, and I practice drawing and combat shooting. A carry gun isn't worth anything if you don't practice, practice, practice how to use it well.

Here's my dirty girl after some range drills.

Reply With Quote
  #25  
Old 07-09-2017, 01:26 PM
Shark Bait's Avatar
Shark Bait Shark Bait is offline
US Veteran
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Mar 2015
Location: New Mexico
Posts: 1,105
Likes: 1,946
Liked 2,461 Times in 573 Posts
Default

I think the 3 inch 686 is a great carry option and the weight doesn't bother me at all. It's a little tough to carry in the summer tough. I carry my 686-4+ when the temps cool off.

Reply With Quote
The Following 4 Users Like Post:
  #26  
Old 07-09-2017, 11:11 PM
digiroc's Avatar
digiroc digiroc is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: Feb 2016
Location: Pittsburgh
Posts: 405
Likes: 202
Liked 707 Times in 246 Posts
Default Switched from J frames to a K frame for EDC ...

My 3" Model 547 in 9mm has proven to be quite comfortable for EDC. The extra weight does not seem to be a bother with a good holster. I carry it as my primary weapon AISW and the extra weight of the all steel K frame is comforting. Bestdes the Kydex shown below I also carry it in a Remora AISW for better concealment and comfort as it can be moved around to suit the situation.



The 547 points so naturally and is so well balanced that it comes up to sight alignment much quicker than my J frames.



I painted the front ramp with white out to pick it up quickly in a defensive situation:



digiroc

Last edited by digiroc; 07-09-2017 at 11:20 PM.
Reply With Quote
  #27  
Old 07-09-2017, 11:54 PM
Neumann Neumann is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: May 2011
Posts: 1,279
Likes: 8
Liked 552 Times in 317 Posts
Default

I have a 2.5", 3" and 4" 686+, and all but the 4" are in my carry rotation. I live in a concealed only state, so an IWB is easier to conceal, but a 4" is a little too long for IWB comfort. Everything feels better in an OWB holster, however. I prefer a boot grip for a short revolver, but a "banana" or round-to-square grip gives you the full length grip you prefer.

Recoil is moderate in a 36+ oz revolver. I shoot nothing but full-load .357 Magnum in mine. I don't think I would like 25 oz recoil, much less an airweight 15 oz.

If you carry "mostly" concealed, that means high ride too. The shorter the barrel, the easier to clear leather in a situation. A 3" 686 has a full-length ejector, whereas 2.5" is short, and takes a good whack to eject all the shells the first time.

I get smaller groups with these revolvers than a mid-range 1911, typically about 3" at 10 yards, SA. I can keep then on a paper plate at that range DA. I think that's dangerous enough for self defense.
Reply With Quote
  #28  
Old 07-21-2017, 12:18 PM
Sol-Invictus's Avatar
Sol-Invictus Sol-Invictus is offline
Member
3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry 3" 686 for carry  
Join Date: May 2016
Posts: 103
Likes: 52
Liked 108 Times in 48 Posts
Default

My k frame 2.5 66 snubs are all more comfortable to carry than my commander. Now i am carrying the new 66 2.75. IWB is a must for concealment for my athletic 5'9" 157lb body. The square but Altai grips from Altamont are my favorite grip.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Anybody carry some form of carry "insurance" gnystrom Concealed Carry & Self Defense 12 06-01-2017 10:05 PM
Would the 2017 Concealed Carry Reciprocity Act Help "May Issue" Residents? bushmaster1313 2nd Amendment Forum 7 02-14-2017 01:03 PM
WTS: S&W 19-5 4" Nickel LNIB / 1955 Pre-27 3.5" / Ed Brown Kobra Carry SS FNforme GUNS - For Sale or Trade 5 07-11-2016 01:59 PM
WTS Model 19 -5 4" (SPF) and 2" and a 686 6" also a Kimber Crimson Carry Custom 11 ldubu GUNS - For Sale or Trade 10 07-07-2011 03:51 PM
"Tactical" ballpoint pens --- prohibited carry-on items? jkc The Lounge 22 06-21-2011 10:30 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 02:42 AM.


S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)