Smith & Wesson Forum

Go Back   Smith & Wesson Forum > General Topics > Concealed Carry & Self Defense
o

Notices

Concealed Carry & Self Defense All aspects of Concealed and Open Carry, Home and Self Defense.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-20-2017, 11:03 PM
ameridaddy ameridaddy is offline
US Veteran
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Nov 2014
Location: central Virginia
Posts: 2,890
Likes: 13,151
Liked 6,891 Times in 2,087 Posts
Default Safety Lesson

I've been carrying a Sig P238 for about five years; good reliable gun, convenient to carry, good .380 ammo available nowadays, never a malfunction.
A few years ago its big brother, the 9mm P938, came out. After hearing some good recommendations here, and the attraction of more choices of better powered ammo, I bought one about six weeks ago, tested a bunch of ammo, and started carrying it in a Kydex OWB holster at 3:30-4:00 o'clock.
Both pistols are very much mini-1911's less the grip safety. They have a thumb safety, the P238 only on the left, the P938 ambidextrous. All's been well until one day about two weeks ago, and again one day last week.

I carry all the time, and at bed time, take the pistol out of the holster, check for safety on, tap the magazine, test the laser and put it on my nightstand. The first time two+ weeks ago, I pulled the P938 out of the holster, went to do my bed time routine and was stunned to see the safety was off. The realization that I was walking around with a loaded, cocked and UNlocked pistol was a scary thought. I wasn't happy with myself, thinking I'd done something really dumb or the detent spring broke. I set the safety, and it snapped onto safe with a nice strong click and seemed securely locked. The next day, I went through the gun, checking again, all seemed well.

Last week, the same thing happened, and I reviewed my day in my mind.
I have a woodshop, crowded with lots of machinery, benches and work surfaces about waist height. I realized that I often bumped my hip moving around my crowded shop. The P938, with its ambi safety, had the right hand safety lever exposed on the outboard side of the gun, and I'm quite sure my bumping around knocked it onto the fire position. I ordered a left side only safety, put the P938 up and carried my old buddy the P238 until the new parts arrived.
No problem doing the swap, and the P938 is back on duty, safety lever completely covered by the holster. The lever was in the notch seen on the grip in the pic.

I thought about looking for a holster that would cover both sides of the gun, but I found I like feel of the gun better without the extra lever under the base of my trigger finger.
Given I never had this problem in five years of carrying the single safety P238, I feel safe and secure now.
Attached Images
File Type: jpg P938.jpg (99.1 KB, 118 views)
Reply With Quote
The Following 4 Users Like Post:
  #2  
Old 09-21-2017, 12:51 AM
TomkinsSP's Avatar
TomkinsSP TomkinsSP is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: May 2017
Location: E of America's Great Lake
Posts: 2,774
Likes: 1,416
Liked 4,377 Times in 1,654 Posts
Default

revolver revolver revolver revolver
Long DA trigger pull, no manual safety.
revolver revolver revolver revolver
This has been a public service announcement.
__________________
Certified Curmudgeon
Reply With Quote
  #3  
Old 09-21-2017, 01:01 AM
Walkingwolf's Avatar
Walkingwolf Walkingwolf is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Apr 2017
Posts: 1,624
Likes: 2,003
Liked 1,653 Times in 809 Posts
Default

The Sig 938, and 238 have a firing pin block, the gun will not go boom unless the trigger is pulled. The thumb safety is there because we are human, and not perfect. Make sure the safety is on when holstering, or removing the gun. If you are going to need the gun for SD, then the safety is coming off anyway. Make a habit of keeping your finger along the slide anytime handling the gun, unless shooting.
Reply With Quote
The Following User Likes This Post:
  #4  
Old 09-21-2017, 02:05 AM
WR Moore WR Moore is offline
Member
 
Join Date: Oct 2006
Posts: 6,581
Likes: 1,788
Liked 5,342 Times in 2,685 Posts
Default

That's been a known issue with ambidextrous safeties since they started putting them on pistols.

Back when, safeties were usually large enough to get the job done, there were safeties for the "other handed", but they were hard to find and relatively expensive, at least on handguns. Then practical pistol became popular and greatly unpractical widgets started being created. Safeties big as steak platters on both sides of the gun even if it wasn't really necessary (but it was tacticool). In the case of slide mounted safeties, I guess designers never realized the elegant solution was to make a reversible safety. Most long gun safeties are reversible.

Last edited by WR Moore; 09-21-2017 at 02:08 AM.
Reply With Quote
The Following 2 Users Like Post:
  #5  
Old 09-21-2017, 08:22 AM
Arik Arik is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
Default

Quote:
Originally Posted by TomkinsSP View Post
revolver revolver revolver revolver
Long DA trigger pull, no manual safety.
revolver revolver revolver revolver
This has been a public service announcement.
Or any other DA gun!

Sent from my XT1650 using Tapatalk
Reply With Quote
The Following User Likes This Post:
  #6  
Old 09-21-2017, 09:04 AM
wingriderz wingriderz is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Aug 2015
Location: Florida
Posts: 3,111
Likes: 2,876
Liked 2,506 Times in 1,281 Posts
Default

Quote:
Originally Posted by TomkinsSP View Post
revolver revolver revolver revolver
Long DA trigger pull, no manual safety.
revolver revolver revolver revolver
This has been a public service announcement.
Not really a real help from some one not carrying a revolver. ( I am a wheel guy at times too).Glad O P got and is solving problem.
__________________
Spin The Wheel
Reply With Quote
The Following 6 Users Like Post:
  #7  
Old 09-21-2017, 12:06 PM
bigggbbruce's Avatar
bigggbbruce bigggbbruce is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Apr 2011
Location: Where this month?
Posts: 3,604
Likes: 264
Liked 4,215 Times in 1,714 Posts
Default

I got a 938 on a trade deal. I kept the gun about a week.

I prefer to carry my DA/SA S&W 908 for these concerns exactly..
Reply With Quote
  #8  
Old 09-21-2017, 03:06 PM
white cloud white cloud is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Dec 2009
Posts: 1,051
Likes: 2,735
Liked 1,373 Times in 573 Posts
Default

I have a friend that carries a Browning Hi-Power with an ambidextrous safety. The levers on it are quite large. I had wondered about something like that happening. Does anyone know if the Hi-Power has any sort of drop proof firing pin safety.

I am sticking with my DA revolvers and autos.
Reply With Quote
  #9  
Old 09-21-2017, 03:08 PM
Old cop Old cop is offline
US Veteran
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Oct 2010
Posts: 7,783
Likes: 4,206
Liked 15,133 Times in 4,143 Posts
Default

I have a friend who recently shot off his left index finger when handling his 1911 style pistol. This had quite an impact on me to the extent I've gotten rid of my Glock 17 & LCP BEFORE something happens in my household. This may seem extreme but I've had one close call and the combination of those things made my mind up. Handling a revolver is second nature based on my LEO experience so I'll stick w/that platform.
__________________
Old Cop
LEO (Ret.)
Reply With Quote
The Following 3 Users Like Post:
  #10  
Old 09-21-2017, 03:11 PM
ContinentalOp's Avatar
ContinentalOp ContinentalOp is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Apr 2009
Posts: 6,315
Likes: 13,115
Liked 12,802 Times in 4,228 Posts
Default

Quote:
Originally Posted by white cloud View Post
Does anyone know if the Hi-Power has any sort of drop proof firing pin safety.
The Mark III version has a firing pin safety. For older models without the firing pin safety you can always add an extra-power firing pin spring to minimize the possibility.
Reply With Quote
  #11  
Old 09-21-2017, 03:14 PM
bigggbbruce's Avatar
bigggbbruce bigggbbruce is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Apr 2011
Location: Where this month?
Posts: 3,604
Likes: 264
Liked 4,215 Times in 1,714 Posts
Default

Quote:
Originally Posted by Old cop View Post
I have a friend who recently shot off his left index finger when handling his 1911 style pistol.
It wasn't the guns fault.
Reply With Quote
The Following User Likes This Post:
  #12  
Old 09-21-2017, 03:26 PM
ContinentalOp's Avatar
ContinentalOp ContinentalOp is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Apr 2009
Posts: 6,315
Likes: 13,115
Liked 12,802 Times in 4,228 Posts
Default

Ambidextrous safeties on 1911s have been known to become disengaged in the holster. I would presume the same issues would be present on similar guns, like the Sig P238/938. I can't think of any specific makers off the top of my head, but I know there have been holsters made that block the underside of the safety lever to keep it from becoming disengaged when carrying.

I've owned a couple of 1911s, both with the single-sided, Colt factory lever. When using it left-handed, I never had issues bringing my left thumb around the back of the gun and disengaging the thumb safety. Engaging it was a little trickier, but could be done with either my thumb or the side of the knuckle of my trigger finger.

For these reasons, if I were to carry a 1911 (or similarly-designed gun), I would stick with the single-sided lever. I would probably also try to check it occasionally, with the gun still in the holster, to make sure the safety was still engaged.

I can see the utility of a slightly oversized thumb safety lever (i.e., the narrow, "tactical" extended lever). While I never failed to properly disengage the standard Colt thumb safety on my 1911s, I never had to do it while someone was trying to kill me. I like the idea of a bit more surface area to make handling a little more positive when under stress.
Reply With Quote
  #13  
Old 09-21-2017, 03:55 PM
ameridaddy ameridaddy is offline
US Veteran
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Nov 2014
Location: central Virginia
Posts: 2,890
Likes: 13,151
Liked 6,891 Times in 2,087 Posts
Talking

Quote:
Originally Posted by TomkinsSP View Post
revolver revolver revolver revolver
Long DA trigger pull, no manual safety.
revolver revolver revolver revolver
This has been a public service announcement.
I used to carry a S&W 638, but my arthritis now keeps my trigger finger from being able to do the "Long DA trigger pull."

I wish I could still do that and many other things too, but I have to adapt to my changing condition. I still love my blue Smiths, but my revolver shooting is now SA only.
On the plus side, I gained three more shots before a reload.
What do Marines say - something like "adapt, improvise and overcome"?
Reply With Quote
  #14  
Old 09-21-2017, 04:30 PM
KSDeputy's Avatar
KSDeputy KSDeputy is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Mar 2014
Posts: 1,504
Likes: 465
Liked 1,574 Times in 700 Posts
Default

Strange, my pistol has a safety but I never use it.
Reply With Quote
The Following User Likes This Post:
  #15  
Old 09-21-2017, 04:54 PM
Old cop Old cop is offline
US Veteran
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Oct 2010
Posts: 7,783
Likes: 4,206
Liked 15,133 Times in 4,143 Posts
Default

Bigggbruce: I never meant my friends ND was the fault of the gun. It was clearly his fault but knowing my own limitations, especially as I get older, thought it best to stick with what I knew best, a revolver. That would be different if I was still a LEO.
__________________
Old Cop
LEO (Ret.)
Reply With Quote
The Following User Likes This Post:
  #16  
Old 09-21-2017, 04:57 PM
Walkingwolf's Avatar
Walkingwolf Walkingwolf is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Apr 2017
Posts: 1,624
Likes: 2,003
Liked 1,653 Times in 809 Posts
Default

Quote:
Originally Posted by white cloud View Post
I have a friend that carries a Browning Hi-Power with an ambidextrous safety. The levers on it are quite large. I had wondered about something like that happening. Does anyone know if the Hi-Power has any sort of drop proof firing pin safety.

I am sticking with my DA revolvers and autos.
Yes, the same as 70 series 1911's. Use a quality holster, and don't drop the gun.
Reply With Quote
  #17  
Old 09-21-2017, 05:26 PM
gman51 gman51 is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Feb 2012
Location: Just West of Houston
Posts: 3,468
Likes: 787
Liked 4,674 Times in 2,062 Posts
Default

This is perfect example why I don't carry a 1911 cocked and locked. I just don't trust the safety wouldn't get moved to fire position. I actually don't care for any semi auto as my main carry.
I agree with the above. Revolver revolver revolver That's what I feel safest with so that's my main carry. To each his/her own feelings about what is safest gun to carry.
Reply With Quote
  #18  
Old 09-22-2017, 05:47 AM
Wise_A Wise_A is offline
Banned
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: May 2016
Posts: 3,121
Likes: 2,661
Liked 4,324 Times in 1,793 Posts
Default

You do realize that the safety isn't what keeps 1911-pattern pistols from firing in a holster, right? It's the covered trigger, which keeps the sear in the path of the hammer, which allows the hammer's half-cock notch to strike the sear face, which retards its motion enough to prevent the firing pin from striking the primer hard enough to fire.

And it's actually pretty good at this.

For the uninitiated, this is why you don't screw around with the internals of a for-carry 1911-pattern. You need pressure on the sear leg of the sear spring to make sure that it knocks the half-cock notch hard enough to prevent a discharge. Virtually every reputable manufacturer ships 1911s with perfectly good triggers. If you want a 2# pull, buy another pistol (SA ROs are good and relatively inexpensive, when they're available) and mess around with that. If you can't shoot a 1911 with a 5# pull--practice.

Oh, and this is also why you don't carry the cheap Philippines-manufactured frames (Armscor, among others). Frames for super-budget 1911s are built with a more "casual" approach to pin location. They're a false economy. If you want something cheap and don't care if it's awful, fine. If you're buying one with the idea that you're going to tune up the trigger, forget it. Many are so badly manufactured that it's aftermarket parts can't be made to give acceptable results. And by the time a pistolsmith fixes the bad gun, you'd have spent more than an entry-level or mid-range pistol costs.
Reply With Quote
The Following User Likes This Post:
  #19  
Old 09-22-2017, 10:03 AM
ContinentalOp's Avatar
ContinentalOp ContinentalOp is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Apr 2009
Posts: 6,315
Likes: 13,115
Liked 12,802 Times in 4,228 Posts
Default

Quote:
Originally Posted by Wise_A View Post
You do realize that the safety isn't what keeps 1911-pattern pistols from firing in a holster, right? It's the covered trigger, which keeps the sear in the path of the hammer, which allows the hammer's half-cock notch to strike the sear face, which retards its motion enough to prevent the firing pin from striking the primer hard enough to fire.
A cocked-and-locked 1911 that becomes unlocked while in the holster isn't going to magically fire. There would have to be some kind of catastrophic failure for that to happen that I have a difficult time imagining, unless someone did a super light trigger job like you mentioned. The belt-and-suspenders part of me would still check the safety periodically if I were to carry a 1911, but it wouldn't be something I'd freak out over.

FWIW, when I had a trigger job done on one of my 1911s, I specified a 4.5-5.0lb pull. It cleaned up nicely, and I never worried about the safety of the hammer/sear engagement. Interesting side note: Ed Brown guns come standard with a 3.5-4.0lb pull, but you can get a 4.5-5.0lb pull as an extra-cost option.
Reply With Quote
The Following User Likes This Post:
  #20  
Old 09-22-2017, 10:19 AM
GeoJelly GeoJelly is offline
Member
Safety Lesson Safety Lesson Safety Lesson Safety Lesson Safety Lesson  
Join Date: Oct 2000
Location: NOVA
Posts: 1,381
Likes: 5,582
Liked 1,379 Times in 579 Posts
Default

Quote:
Safeties big as steak platters on both sides of the gun even if it wasn't really necessary (but it was tacticool)
One more thread that I'm glad I read! I have a P238 but don't carry it cocked and locked. It too has the single-side safety but I've never been comfortable with the whole C&L concept. I've got a slightly shopworn P230 that I can carry if a SIG .380 fits into my limited rotation. This morning, like the past few mornings, I had my newest (old) 442 in my pocket when I Drove Miss Daisy ... I fully understand the mechanics of SA autos and firing pin safety mechanisms.

Last edited by GeoJelly; 09-22-2017 at 11:26 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
EDC Lesson Old cop Concealed Carry & Self Defense 120 09-08-2017 03:42 AM
A sad lesson Doug M. Concealed Carry & Self Defense 38 06-02-2017 11:47 AM
I Need Box Lesson? SW MP15 S&W Revolvers: 1980 to the Present 1 11-09-2015 12:40 PM
Civics lesson imjin138 The Lounge 5 07-28-2013 04:15 PM
Lesson learned. C/O Smith & Wesson Semi-Auto Pistols 0 09-25-2009 06:18 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 05:16 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)