|
|
|
10-26-2020, 08:05 PM
|
|
US Veteran
|
|
|
Join Date: Oct 2020
Location: HEART of TEXAS
Posts: 554
Likes: 574
Liked 881 Times in 292 Posts
|
|
Speedloaders
I owned a 38spl/357 speedloader 30 years ago. It worked well.
I started shooting Model 29s again and researched speedloaders for .44. Every site said Safariland was best. I order 2 of them. They are more trouble than they are worth. 2 minutes to get bullets locked in and will not release. Anyone out there have better experience or recommendation. I called safariland and they readily agreed to send replacements.
Claymore
|
The Following User Likes This Post:
|
|
10-26-2020, 08:19 PM
|
|
Member
|
|
|
Join Date: May 2020
Location: NYC
Posts: 454
Likes: 5,215
Liked 1,184 Times in 312 Posts
|
|
I've had nothing but good experiences with Safarilands's Comp II speedloaders in 38/357. The only three things I can think of are that your set happened to be defective, you might be trying to load/unload them improperly, or there's some difference between the 38/357 models and the 44 models aside from dimensions. I don't believe the third point is the case.
When loading, place the rounds in the speedloader and hold the loader so that they're facing upwards. Hold the body of the loader and the rounds cupped from the side in one hand, and use the other hand to push up on the knob and turn it until it clicks while still pushing upward on it.
To unload it into a cylinder, just push the speedloader body downward toward the cylinder until the rounds release. If you're trying to unload the speedloader without putting the rounds into a gun, use a pen or rigid rod to push the center section until it clicks and the rounds release.
This video demonstrates the procedures. See 0:44 for unloading rounds into a cylinder, and 1:35 for loading the speedloader. Granted, the method he uses of placing it facedown on the table to load it is different than what I described above, but it seems to work fine.
|
The Following 7 Users Like Post:
|
|
10-26-2020, 09:04 PM
|
Member
|
|
|
Join Date: Sep 2020
Location: Swamps of Southeast La.
Posts: 47
Likes: 36
Liked 103 Times in 33 Posts
|
|
I was looking for 44 mag speedloader for my new 29 a couple of weeks ago. I must have read the same article you did.
I decided to cover all bases so I ordered the Safariland Comp 1 ( fits in pocket Best and is smallest; I really like it.
HKS that has a turn to release. Easy in and out.
speed Beez: really cool looking. Largest of all. But had to have cut out grips to fit fast( which I have)
The Safari are hardest to load : I push them up against a WALL and then turn till hear them click.
I bought a vintage Tex Shoemaker and the Safari comp 1 fit flush.
I am favoring the comp 1 as it slips right in, then a downward push and it drops bullets in and drops free on its own.
I can throw 3 of them in my pocket and they take up little room.
|
10-26-2020, 09:29 PM
|
|
US Veteran
|
|
|
Join Date: May 2018
Location: Selah, Washington
Posts: 708
Likes: 2,255
Liked 1,188 Times in 424 Posts
|
|
I bought HKS speed loaders for my model 29 and 629 they work great, no complaints. I got talked into buying a Safariland, not my cup of tea, I gave it to a friend and he passed it along as well. The Speed Beez work great but their size is an issue. I tried some Five Star speed loaders, they are great, I bought more and a range block as well. I use the Five Star speed loaders and blocks for competition and the HKS speed loaders are for my in the mountains gun.
A link for Five Star: Speed Loading Accessories
__________________
U.S. Coast Guard, retired CPO
|
The Following 5 Users Like Post:
|
|
10-26-2020, 09:34 PM
|
|
Member
|
|
|
Join Date: Jan 2011
Location: NM home; Tbilisi work
Posts: 5,109
Likes: 11,823
Liked 11,553 Times in 3,501 Posts
|
|
Add me to the HKS fan list. Simple, durable, reliable, fast.
|
The Following 8 Users Like Post:
|
|
10-26-2020, 10:36 PM
|
|
US Veteran
|
|
|
Join Date: Oct 2020
Location: HEART of TEXAS
Posts: 554
Likes: 574
Liked 881 Times in 292 Posts
|
|
NY-1 answer
My safariland Comp 1 loaders do not look like the ones in the video at all
Claymore
|
10-26-2020, 10:48 PM
|
|
Member
|
|
|
Join Date: May 2020
Location: NYC
Posts: 454
Likes: 5,215
Liked 1,184 Times in 312 Posts
|
|
Quote:
Originally Posted by Claymore33
My safariland Comp 1 loaders do not look like the ones in the video at all
Claymore
|
The Comp I loaders are a little different than the Comp II's (in the previous video), but they fundamentally operate in the same fashion.
Start at 2:10 in the video below for a demonstration on how to release and load Safariland's Comp I loaders.
|
The Following User Likes This Post:
|
|
10-28-2020, 11:26 AM
|
|
US Veteran
|
|
|
Join Date: Oct 2020
Location: HEART of TEXAS
Posts: 554
Likes: 574
Liked 881 Times in 292 Posts
|
|
SPEEDLOADERS
That film is big help. I think HKS is best for me. I am using pouch on belt.
Thank You
Claymore33
|
The Following 2 Users Like Post:
|
|
10-28-2020, 11:54 AM
|
Member
|
|
|
Join Date: May 2018
Location: Colorado
Posts: 267
Likes: 291
Liked 295 Times in 138 Posts
|
|
I started shooting Steel Challenge this summer with a 686, and tried both the HKS & Safariland Comp IIs. For me the Safariland, with a bit of practice, was the fastest and easiest. A little more trouble to load, but no twisting to unload, just push in and drop it. I'm not sure how that translates to the .44, but can only imagine that it's not too different. Once I got the hang of it, loading them is fairly easy, too. For competition or self defense, the speed makes a difference.
|
The Following 5 Users Like Post:
|
|
10-28-2020, 11:57 AM
|
SWCA Member
|
|
|
Join Date: May 2008
Location: Peoples Republic of Calif
Posts: 4,644
Likes: 1,226
Liked 5,989 Times in 2,133 Posts
|
|
One more vote for HKS. Use them for years. Like them. Simple, reliable, acceptably fast.
|
The Following 4 Users Like Post:
|
|
10-28-2020, 12:00 PM
|
US Veteran
|
|
|
Join Date: Oct 2010
Posts: 7,785
Likes: 4,208
Liked 15,136 Times in 4,144 Posts
|
|
Another vote for HKS here. They’re readily available, reasonably priced and pretty effective. I own several for my J & K frames and like to practice @ the range w/them.
__________________
Old Cop
LEO (Ret.)
|
The Following 4 Users Like Post:
|
|
10-28-2020, 12:32 PM
|
|
Member
|
|
|
Join Date: Apr 2012
Location: Western New York
Posts: 5,916
Likes: 15,407
Liked 10,827 Times in 3,634 Posts
|
|
Yep, I concur. All of my speed loaders are HKS and work great. That said, I do not have one for my M29.
__________________
paws for friendship
|
The Following 2 Users Like Post:
|
|
10-29-2020, 10:21 AM
|
|
US Veteran
|
|
|
Join Date: Mar 2011
Location: Indiana
Posts: 196
Likes: 624
Liked 769 Times in 137 Posts
|
|
I have multiple Safariland Comp I's for J-Frame and Model 29 and Comp II and III for K-Frames. Safariland speed loaders are absolutely the best as far as speed of use goes.
HKS speed loaders are solid and reliable but are not as easy or as fast to use.
|
The Following 4 Users Like Post:
|
|
10-29-2020, 10:28 AM
|
Member
|
|
|
Join Date: Aug 2018
Location: Chicagoland
Posts: 1,461
Likes: 1,241
Liked 2,529 Times in 856 Posts
|
|
Another vote here for HKS. I use them for my 38/357 and 44 revolvers.
|
The Following 2 Users Like Post:
|
|
10-29-2020, 10:40 AM
|
Member
|
|
|
Join Date: Mar 2007
Location: SW Ohio
Posts: 700
Likes: 255
Liked 581 Times in 272 Posts
|
|
I started my police career using dump pouches. I purchased HKS speedloaders when I first saw them. They worked OK. I took an officer survival class which introduced the Safariland comp loaders to me. I have used Safariland ever since.
|
The Following 3 Users Like Post:
|
|
10-29-2020, 12:41 PM
|
Member
|
|
|
Join Date: Aug 2013
Location: Kansas City area
Posts: 890
Likes: 0
Liked 740 Times in 368 Posts
|
|
Quote:
Originally Posted by Borderboss
Another vote here for HKS. I use them for my 38/357 and 44 revolvers.
|
Same here, all of mine are HKS.
|
The Following User Likes This Post:
|
|
10-29-2020, 02:54 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2017
Location: Missouri
Posts: 2,929
Likes: 3,902
Liked 6,802 Times in 1,851 Posts
|
|
I had never used the Safariland until recently it was always HKS.
I was shooting a 9 bowling pin match earlier this year and watched a young police officer using a 627, he took down all 9 with one reload as fast if not faster then the auto competitors without missing a single shot.
When we were done shooting I asked to see the rig he was using they were the comp II type. I bought some and they are harder to load up but much faster when loading the revolver.
__________________
SWHF #595
|
The Following 3 Users Like Post:
|
|
10-29-2020, 07:18 PM
|
SWCA Member
|
|
|
Join Date: Jun 2008
Location: Northwest Ohio
Posts: 2,190
Likes: 5,887
Liked 2,665 Times in 1,018 Posts
|
|
HKS for me ...
HKS work great for me and at a very reasonable price...why spend more $ for the more expensive ones?
|
The Following 2 Users Like Post:
|
|
10-29-2020, 08:44 PM
|
Member
|
|
|
Join Date: Oct 2020
Location: L.I.N.Y.
Posts: 24
Likes: 0
Liked 31 Times in 14 Posts
|
|
HKS for my .44,.357's and .38's No complaints here
|
The Following User Likes This Post:
|
|
10-29-2020, 10:23 PM
|
|
Member
|
|
|
Join Date: May 2003
Location: DUNNELLON, FLORIDA USA
Posts: 11,102
Likes: 1,690
Liked 16,303 Times in 4,232 Posts
|
|
Wimp Way (Jimmy):
Hold loader upward
place cartridges in
with off hand place over the bullets and turn hands over where bullets are facing down
carefully place bullets on a hard surface (table/desk top. car fender)
push loader middle button down and turn to lock cartridges in.
P.S. now that my pants have sunk smaller hanging in the closet, I normally carry speed strips
Last edited by jimmyj; 10-29-2020 at 10:27 PM.
|
The Following 2 Users Like Post:
|
|
10-30-2020, 04:41 AM
|
US Veteran
|
|
|
Join Date: Oct 2010
Posts: 7,785
Likes: 4,208
Liked 15,136 Times in 4,144 Posts
|
|
Quote:
Originally Posted by xfarfuldog
I started my police career using dump pouches. I purchased HKS speedloaders when I first saw them. They worked OK. I took an officer survival class which introduced the Safariland comp loaders to me. I have used Safariland ever since.
|
I used an early model of the speedloader in a 1974 gunfight w/armed robbery suspects and it got me back in the fight in an instant. Another cop was shot trying to reload from his dump pouch. Speedloaders were not issued equipment until later, I’d purchased these on my own.
__________________
Old Cop
LEO (Ret.)
|
The Following 6 Users Like Post:
|
|
10-30-2020, 10:57 AM
|
|
SWCA Member
|
|
|
Join Date: May 2018
Location: Outer Uzbekistan
Posts: 4,656
Likes: 8,567
Liked 11,674 Times in 3,054 Posts
|
|
For speed- Safariland.
HKS are somewhat slower. For twist knob, 5- Star is much better made than HKS
__________________
SWCA #3356, SWHF#611
|
The Following User Likes This Post:
|
|
11-21-2020, 12:02 AM
|
|
Member
|
|
|
Join Date: Jul 2012
Location: SouthWest Michigan
Posts: 583
Likes: 284
Liked 338 Times in 194 Posts
|
|
I never liked the HKS. Too wobbly, and they take a bit of fidgeting to make line up. Plus, a knob to turn just adds more steps. Safariland is the only way to fly. I have them for all my revolvers, including my model 629. 38, 357, 44 spl/mag. J, K, L, and N frames. They work flawlessly, and are easy to load. For my money, they are THE best. I practice with them often, and can peel very respectable reload times with them.
__________________
Matthew 5:9
Last edited by 66snub; 11-21-2020 at 12:03 AM.
|
The Following 2 Users Like Post:
|
|
11-30-2020, 09:09 AM
|
|
Member
|
|
|
Join Date: Mar 2011
Location: Cochise County, Arizona
Posts: 390
Likes: 230
Liked 311 Times in 136 Posts
|
|
Safariland for me. Once you put the rounds in, press the bullets against the palm of your hand while pushing down and turning the knob with your other hand. You'll hear a click and they are locked in. Should take less than 10 seconds.
|
The Following User Likes This Post:
|
|
11-30-2020, 09:41 AM
|
Member
|
|
|
Join Date: Mar 2020
Posts: 306
Likes: 406
Liked 491 Times in 196 Posts
|
|
I still have two HKS 44 speedloaders which work. The cartridges were never loose while in them but they are quite a bit older. I also have the double holder to put them in (boy is that a big block of hard leather!).
For CC, to me, they're too big/bulky to lug around, unless I plan on wearing my old duty belt, not! I went to speed strips. A hunting firearm would be a different story...
|
11-30-2020, 09:43 AM
|
|
Member
|
|
|
Join Date: Mar 2014
Location: bootheel of Missouri
Posts: 16,855
Likes: 6,981
Liked 28,085 Times in 8,897 Posts
|
|
I use the HKS. I've seen the Safariland do one of two things more than once on the range.
a: Fail to release because of debris under the star . . .
2: Fly apart like an Indy car, sometimes as the reload is completed, sometimes while it's in progress . . .
__________________
Wisdom comes thru fear . . .
|
The Following User Likes This Post:
|
|
11-30-2020, 09:51 AM
|
|
Member
|
|
|
Join Date: Apr 2012
Location: Mpls, Minnesota
Posts: 867
Likes: 87
Liked 967 Times in 398 Posts
|
|
Quote:
Originally Posted by xfarfuldog
I started my police career using dump pouches. I purchased HKS speedloaders when I first saw them. They worked OK. I took an officer survival class which introduced the Safariland comp loaders to me. I have used Safariland ever since.
|
Ditto that. The issue we had with the HKS loaders were officers would grab the speedloader by the knob when removing them from the pouch and often times wound up twisting the knob as they were removed, dumping the rounds onto the ground. Never had that issue with the Safariland's. Safariland also held the rounds tighter with less wiggle which facilitated loading.
Still using Safariland loaders in competition.
If you are doing casual reloading - as in hunting, then HKS might be your ticket. Critical reloads - I would go with Safariland.
|
The Following 5 Users Like Post:
|
|
11-30-2020, 10:12 AM
|
Member
|
|
|
Join Date: Oct 2005
Location: A Burb of the Burgh
Posts: 14,749
Likes: 1,616
Liked 19,851 Times in 8,772 Posts
|
|
When I was shooting PPC in the 80s I started with HKS..... but carried in a Bianchi double leather open top "pouch" that retained the speedloaders with friction. When you grabbed the knob on the HKS speedloader it "wasn't hard" to twist the knob; leaving you holding a empty speedloader and leaving the reload loose in the pouch.
I switched to Safariland Comp IIs (and Comp I's for J-frames)
|
The Following 2 Users Like Post:
|
|
11-30-2020, 12:57 PM
|
Member
|
|
|
Join Date: Feb 2006
Posts: 3,183
Likes: 398
Liked 5,023 Times in 1,625 Posts
|
|
I was mandated to carry what are now called "Comp 1" N-Frame Safarilands in the 80s. After buying several I found 2 that would work...mostly...in the right phase of the moon. In one case while qualifying the thing seized up and would not until release the rounds until thrown to the ground and smashed with a boot heel (remember - I'm staking my life on this junk). I did qualify - that's a revolver malfunction drill. Once I found the ones that usually worked I kept them in my pouches and used them for qualification. I carried HKS in my pocket in case I actually needed a reload. Maybe I was just unlucky and kept getting Friday production, but I never trusted them after that. I had 2 K-frame models for my wife's 67 that worked fine.
__________________
I need ammo, not a ride.
|
The Following User Likes This Post:
|
|
11-30-2020, 12:57 PM
|
Member
|
|
|
Join Date: Oct 2005
Location: Austin, AR
Posts: 1,398
Likes: 1,618
Liked 2,419 Times in 748 Posts
|
|
I started using speedloaders in the mid 80's when I started as a resrve officer in civilian law enforcement. Tried both HKS and Safariland and preferred the Safariland. One of the more senior officers criticized the Safariland as being too fragile. I really hadn't considered that so I popped one out of my pouch and chunked it down the 40' hallway hitting the floor then bouncing off the metal door at the end. No rounds came out and the speedloader was undamaged. He had nothing more to say and my question was answered. Never had a failure with them. HKS are good too, Safariland is just my preference.
|
The Following 2 Users Like Post:
|
|
11-30-2020, 01:06 PM
|
|
Member
|
|
|
Join Date: Feb 2015
Location: NC
Posts: 4,710
Likes: 3,527
Liked 12,557 Times in 3,342 Posts
|
|
Quote:
Originally Posted by BAM-BAM
When I was shooting PPC in the 80s I started with HKS..... but carried in a Bianchi double leather open top "pouch" that retained the speedloaders with friction. When you grabbed the knob on the HKS speedloader it "wasn't hard" to twist the knob; leaving you holding a empty speedloader and leaving the reload loose in the pouch.
I switched to Safariland Comp IIs (and Comp I's for J-frames)
|
HKS speed loaders require some proactive treatment to prevent dumping the rounds. They release with a clockwise twist on the knob, so you intentionally put some counter clockwise pressure on the knob when you pull them out of the holder.
And you do it every time you pull it out of the holder, so that it becomes an ingrained habit that you'll do under pressure without having to think about it.
Similarly, with any speed loader, you use the speedloader for EVERY reload, tactical or administrative, so it becomes a natural, unconscious act that will happen naturally under pressure.
|
The Following 3 Users Like Post:
|
|
11-30-2020, 01:12 PM
|
|
Member
|
|
|
Join Date: Feb 2015
Location: NC
Posts: 4,710
Likes: 3,527
Liked 12,557 Times in 3,342 Posts
|
|
Quote:
Originally Posted by elpac3
Ditto that. The issue we had with the HKS loaders were officers would grab the speedloader by the knob when removing them from the pouch and often times wound up twisting the knob as they were removed, dumping the rounds onto the ground. Never had that issue with the Safariland's. Safariland also held the rounds tighter with less wiggle which facilitated loading.
Still using Safariland loaders in competition.
If you are doing casual reloading - as in hunting, then HKS might be your ticket. Critical reloads - I would go with Safariland.
|
As noted in my post above, what you are describing is a training issue, not a fault with the HKS speedloader. Then again, most LEOs are not gun people, don't shoot more than necessary to qualify, and are on balance poorly trained, so a Safariland speedloader arguably eliminated an item from the (dumbed down) training syllabus.
----
As for tighter versus looser, it depends. In general "tighter" seems to facilitate loading better - with round nosed bullets.
However with hollow points, I generally find a little wiggle makes alignment with the cylinder easier and faster.
|
The Following 2 Users Like Post:
|
|
11-30-2020, 01:34 PM
|
Member
|
|
|
Join Date: Oct 2005
Location: A Burb of the Burgh
Posts: 14,749
Likes: 1,616
Liked 19,851 Times in 8,772 Posts
|
|
Quote:
Originally Posted by BB57
HKS speed loaders require some proactive treatment to prevent dumping the rounds. They release with a clockwise twist on the knob, so you intentionally put some counter clockwise pressure on the knob when you pull them out of the holder.
And you do it every time you pull it out of the holder, so that it becomes an ingrained habit that you'll do under pressure without having to think about it.
Similarly, with any speed loader, you use the speedloader for EVERY reload, tactical or administrative, so it becomes a natural, unconscious act that will happen naturally under pressure.
|
True ... not saying it happened every time,twice in competition was enough, once it happened the second time I lost some faith in the HKS.... figured it would/could happen at the worst time ..... so I tried the Safariland and "never" had the issue again.......
By the way still have some HKS and it's not an issue with loose fit flapped pouches.....which I'll use for woods carry!
|
11-30-2020, 04:37 PM
|
|
Member
|
|
|
Join Date: May 2006
Location: N. Ohio
Posts: 1,677
Likes: 9,357
Liked 2,709 Times in 991 Posts
|
|
I like Speed Strips. They may not be as fast but, I fumble less with them. I do not shoot competition.
__________________
Two Handguns every day
|
11-30-2020, 04:48 PM
|
Member
|
|
|
Join Date: Jul 2005
Location: oklahoma
Posts: 577
Likes: 324
Liked 1,036 Times in 312 Posts
|
|
HKS loaders have almost always worked well for me. My experience with the Safariland is that it won't lock.
__________________
Let's be careful out there
|
The Following User Likes This Post:
|
|
11-30-2020, 07:41 PM
|
Member
|
|
|
Join Date: Oct 2006
Posts: 6,583
Likes: 1,789
Liked 5,342 Times in 2,685 Posts
|
|
I've used both, prefer Safariland. However, at least the N frame ones are larger than HKS and you have to use Safariland pouches. Anyone know if the Comp II versions fit the faux leather cheapo HKS pouches?
Added info: the HKS large pouches take both the HKS & Safariland N frame speedloaders. However, the HKS units are much taller and the Safariland loaders would need the tops of the pouches trimmed to make quick access easier. The smaller knobs on the top of the Safariland Comp 1 loaders make grabbing by the knob a possible problem. Probably not an issue with the Comp 2 loaders with the larger knob.
Last edited by WR Moore; 02-01-2021 at 07:00 PM.
|
12-01-2020, 01:26 AM
|
Member
|
|
|
Join Date: Sep 2018
Posts: 6,702
Likes: 13,215
Liked 15,591 Times in 4,907 Posts
|
|
I like HKS as well.
__________________
No baby we aint
|
12-01-2020, 07:32 AM
|
Member
|
|
|
Join Date: May 2004
Location: Eugene, Indiana USA
Posts: 157
Likes: 29
Liked 67 Times in 37 Posts
|
|
I have had the HKS drop rounds before getting to the empty cylinder also, not good. Safariland has never done anything like that and for me are much faster. Agree they are harder to load I have found two ways that work for me. First is a loading block, easy peasy. The other is if I am loading at a table or bench instead of holding the rounds in place while I turn them up side down keep right side up and push up against the bottom of the bench. Jim.
|
12-01-2020, 11:30 AM
|
|
US Veteran
|
|
|
Join Date: Dec 2003
Location: "Land of Disenchantment"
Posts: 3,375
Likes: 3,918
Liked 9,077 Times in 2,497 Posts
|
|
Quote:
Originally Posted by delcrossv
For speed- Safariland.
HKS are somewhat slower. For twist knob, 5- Star is much better made than HKS
|
I agree, but I wish that 5-Star turned the same way as the HKS that have been around for ever.
__________________
Only a cold warrior
|
12-02-2020, 06:18 AM
|
|
Member
|
|
|
Join Date: Mar 2016
Posts: 252
Likes: 1,019
Liked 442 Times in 161 Posts
|
|
Quote:
Originally Posted by elpac3
Ditto that. The issue we had with the HKS loaders were officers would grab the speedloader by the knob when removing them from the pouch and often times wound up twisting the knob as they were removed, dumping the rounds onto the ground. Never had that issue with the Safariland's. Safariland also held the rounds tighter with less wiggle which facilitated loading.
Still using Safariland loaders in competition.
If you are doing casual reloading - as in hunting, then HKS might be your ticket. Critical reloads - I would go with Safariland.
|
In all the years we carried S&W m65 on duty I never saw this happen. I suspect ether old worn equ. or people playing with their gear. Some people just can't keep their hands off stuff. Put me down for HKS, but thats what I'm used to. I'll bet Safariland are just as good.
|
12-03-2020, 12:10 PM
|
Member
|
|
|
Join Date: Mar 2011
Posts: 425
Likes: 88
Liked 393 Times in 196 Posts
|
|
Quote:
Originally Posted by IAhunter
Safariland for me. Once you put the rounds in, press the bullets against the palm of your hand while pushing down and turning the knob with your other hand. You'll hear a click and they are locked in. Should take less than 10 seconds.
|
This is how I load mine. I prefer Safariland for anything they are available for.
|
12-03-2020, 05:44 PM
|
Member
|
|
|
Join Date: Jan 2008
Location: Eastern Nebraska
Posts: 3,857
Likes: 10,175
Liked 8,256 Times in 2,854 Posts
|
|
I am a vote for HKS... only because my father used them in pistol matches in the 70's and 80'... he had over 2 dozen HKS & 1 Safariland.. that one lone Safariland was probably a door prize at the club banquet ...
|
12-03-2020, 07:27 PM
|
Member
|
|
|
Join Date: Dec 2011
Location: SW Missouri
Posts: 2,604
Likes: 330
Liked 3,256 Times in 1,346 Posts
|
|
Takes me about 8 se onds to reload the Safariland speedloader if I hurry. Double that if I don’t.
Safariland is way better than HKS
|
12-03-2020, 08:14 PM
|
Member
|
|
|
Join Date: Jul 2018
Location: Southern FL, East side.
Posts: 2,281
Likes: 2,312
Liked 3,011 Times in 1,251 Posts
|
|
Yep, Safariland is the way to go. I carried them on duty for many years. I've carried them for J frames, K frames, L frames and N frames. I carried the Safariland loaders on duty for my 629 for many years. I've never had a problem. All were/are the Comp 1s.
The only problem I ever had was I noticed the roll pin working out on a loader after much use. I pushed it back in place and spread the ends of the pin a tad. I had no more issues.
Loading the things does involve a bit of a learning curve. Initially they are easiest to load if you place your bullets in the loader then smack it up against a table, wall or any flat surface and then push in and twist the knob. With practice you'll get to where you can just hold them upright and twist the knob. After you have the loader loaded you should look at it to make sure the rounds and star are properly aligned and then hold the loader with the bullets up and push the knob in. It is possible to to get the star caught on a case rim as opposed to properly placed behind the rim.
I've never had Safariland loaders release unintentionally. I have on several occasions during qualifications observed others LEOs dump rounds from HKS loaders. I think what they did is, during a timed qualification, jam the bullets against the cylinder and turn the knob when they weren't actually in the chambers. You can't make that mistake with the Safariland.
|
The Following User Likes This Post:
|
|
08-04-2022, 08:01 PM
|
Member
|
|
|
Join Date: Aug 2022
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
|
|
Safariland Speed loader for Model 19 S&W 44 mag
I received this product and made attempts to load cartridges without success. The product information fails to advise that the wooden handle on the gun has to be replaced for the speed loader to work. I am returning my speed loaders to Safariland and looking for a viable alternative that will fit the wooden grips that are standard on the model 29.
|
08-05-2022, 05:23 AM
|
Member
|
|
|
Join Date: May 2012
Location: North Georgia
Posts: 4,497
Likes: 2,830
Liked 9,065 Times in 3,182 Posts
|
|
My impressions with preference for HKS:
Safariland, load rounds, hold under a table
edge and press, twist upward. Locks quickly.
HKS, no more wobble with the newer
models in .38/357; easier to load.
Safariland, takes a lot of pressure against
the cylinder to release.
HKS, must hold or stabilize cylinder to allow
proper twist of knob.
Safariland, a bit faster to use in reloading.
HKS, more durable with use over time.
Safariland, "new" school method but
reliable.
HKS, "old" school method but reliable.
Safariland, not as many caliber choices.
HKS, seems to cover most any revolver
caliber.
Safariland, not as durable with repeated
hitting of concrete floors, being stepped
on.
HKS, never seem to get damaged.
Safariland, more expensive.
HKS, more economical.
__________________
Ubi Est Mea
|
The Following User Likes This Post:
|
|
08-05-2022, 10:18 AM
|
Member
|
|
|
Join Date: Jul 2018
Location: Southern FL, East side.
Posts: 2,281
Likes: 2,312
Liked 3,011 Times in 1,251 Posts
|
|
Quote:
Originally Posted by Robert2534
I received this product and made attempts to load cartridges without success. The product information fails to advise that the wooden handle on the gun has to be replaced for the speed loader to work. I am returning my speed loaders to Safariland and looking for a viable alternative that will fit the wooden grips that are standard on the model 29.
|
You must have a very vintage 29. I think all have come with grips cut for speedloaders for many, many years. It the grips aren't cut for speedloaders neither Safariland or HKS will work and you're left to use loose rounds or strips. If your gun is that old, the grips are original and you plan to shoot a lot then remove the grips and stash them so they don't get beat up and buy some more modern grips for everyday use.
|
The Following 3 Users Like Post:
|
|
08-21-2022, 06:48 PM
|
Member
|
|
|
Join Date: Oct 2006
Posts: 6,583
Likes: 1,789
Liked 5,342 Times in 2,685 Posts
|
|
Quote:
Originally Posted by Robert2534
I received this product and made attempts to load cartridges without success. The product information fails to advise that the wooden handle on the gun has to be replaced for the speed loader to work. I am returning my speed loaders to Safariland and looking for a viable alternative that will fit the wooden grips that are standard on the model 29.
|
Got sad news for you. The stocks on your revolver were designed before speedloaders were invented and all speed loaders have about the same dimensions. If you want to use speed loaders your choices are new stocks or modification of the old ones with a speed loader cut like more recent stocks have.
At least where I shop, the price difference between Safariland & HKS is about a one buck apiece.
Last edited by WR Moore; 08-21-2022 at 06:50 PM.
|
08-23-2022, 03:33 PM
|
Member
|
|
|
Join Date: Apr 2004
Location: east valley
Posts: 528
Likes: 4,538
Liked 539 Times in 305 Posts
|
|
I too use HKS for my j frames,k frames and colt d frames.They work great and are very easy to use and carry in my don hume pack six on the belt speedloader pouches.
|
08-23-2022, 03:52 PM
|
Member
|
|
|
Join Date: Jan 2019
Location: Vermont
Posts: 2,336
Likes: 912
Liked 6,417 Times in 1,761 Posts
|
|
I have two Model 547's, and I dream of finding a speed loader for them. HKS made them back in the day, but I suspect I'll never come across any.
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
|
|
|
|