Look. If you do not want to help do not reply..
you are confused!!!!!!!!!!!!

I think they might be trying to help in their own way, Bob. They might be just trying to persuade you or anyone else that minimizing wear on the gun should not be the primary criterion in selecting a holster.

Of course, nowhere did you state that is your primary concern; only that it is a concern. And it is not like you have to choose a lousy holster in order to minimize wear.

It seems like I heard some holster maker I held in high regard (but I cannot remember who now) say that a soft leather lining can sometimes accelerate wear if it holds onto dust or dirt or lint or whatnot vs. a properly crafted unlined leather holster. I am sorry I do not remember more specifics.

Bob, there are a lot of people here that have a LOT of experience carrying handguns. Some of them might even tell you things you do not want to hear. It will pay off to listen to them and at least consider what they are saying and why.

I will advise that holster wear should not be a concern. First off, a kydex holster kept clean inside will wear the finish less than a leather holster that has all sorts of grit embeded in it. But in the end all holsters will wear the finish to some degree. That degree being directly proportional to how many times you draw your firearm. Since drawing from concealment is something that MUST be trained and practiced repeatedly, it follows that your handgun's finish will be affected. It cannot be any other way if you are to become a proficient gun hand.

It is also a fact that it is very likely that your handgun will be taken as crime scene evidence if you ever shoot someone in self defense. There is no way to know how long the gun will be gone nor how well, or badly, it will be treated by the police. In some jurisdictions, you may as well kiss it goodby even if you are cleared or not charged. Our recent changes to our self defense laws compel the police to take care of evidence firearms and return them in the same condition as they were taken, but there are still some PDs, particularly in the big cities, who think that they are above the law.

So yes, a little wear on your handgun is something you should not waste any time considering.

And no, I am not confused, BTW.

Bob H,

I have always had a lot of luck with DeSantis holsters. I prefer holsters with a thumb break and I prefer leather holsters. Most of the DeSantis belt slide (pancake) holsters can be worn strong side or weak side (cross draw). I highly recommned carrying stong side but the cross draw option is handy when riding in a car.

Hi guys,
I am not tying to start any thing. And I realy am greatful for your help. I take care of every thing I have. That is the way I am. I am disabled and the cost means alot. I like this site I wish I found it sooner. I just would not say any thing against another member.
Unless I could help him solve his problem..
Regards
Bob

Does your disability affect the way you sit, stand, or use your hands? If so, you may want to consider other types; e.g., someone confined to a wheelchair may want to consider a cross-draw or shoulder holster, or even a bandolier.

As far as the expense is concerned, you may want to consider a nylon fabric holster such as the Protech brand. They're good quality, but general in fit, and therefore less expensive.

www.holsterusa.com

quote:

Originally posted by BOB H.:
Hi guys,
I am not tying to start any thing. And I realy am greatful for your help. I take care of every thing I have. That is the way I am. I am disabled and the cost means alot. I like this site I wish I found it sooner. I just would not say any thing against another member.
Unless I could help him solve his problem..
Regards
Bob

Hard chrome, nickel and stainless steel guns deal with holster wear the best. My nickel 586 has been in and out of holsters (usually a Mika IWB or a FIST kydex/leather hybrid) for a year and a half on a very regular basis and it still looks great. Realize that finish wear on a carry gun doesn't mean that it hasn't been taken care of. A clean, properly lubricated and dust free gun is a much better indicator of proper care.

Hi I can walk but not for long. I had 7 operations on my back. But I still feel that I am lucky. My family and beliving in god gets me by. A buddy of mine a Euclid policeman gave me a right hand side black holster. And my witness and my P12 para ordance fits great in it.
The only numbers on the back of the holster is Gould & Goodrich B-29 469 .
I found my right holster. Thanks guys for all your help.
greatful
Bob

Good on ya Bob. Best wishes and stay safe.

Hey Wyatt Earp, you seem to be pretty knowledgeable on holsters. What do you think of Don Hume holsters? I picked up an open top concealable for my M&P 40 compact. I usually prefer Galco products but they didn't have a model for my needs to fit this pistol yet. Your opinions please. Thanks.

Don Hume products are outstanding values! I own at least 5 of them. Another outstanding value are the DeSantis line of holsters. When I cannot afford a Kramer/Milt Sparks holster for that new dragon slayer I usually turn to either Don Hume or DeSantis and it has NEVER disappointed me. I am sure that it will be the same for you as well! Just my two cents worth as a long time instructor.
Randy

quote:

Originally posted by Firehouse Firearms:
What do you think of Don Hume holsters?

I think they are economical, easily available leather that will get you by in a pinch. But I have been spoiled by leather from the custom makers.

There are several custom makers who will provide you with a holster of top shelf quality for less than $100 (sometimes quite a bit less) and without outrageous wait times.

I've had leather from Hume, K&D Holsters, O'Rourke Leather, FIST, and Shado. Of those K&D and O'Rourke are on my repeat buy list. Neither of them has a holster that tops $70.

As always, thanks for the valuable input guys. Much obliged.

One major difference I have noticed between custom holsters and over the counter holsters is that custom makers seem to be able to make a good stiff holster with minimum thickness. Don Humes are okay, but they are thicker than most of your better custom jobs.

quote:

Originally posted by boomstick:

quote:

If you are truly worried about holster wear you have your priorities confused.

+100.

A carry gun is a tool. Would you worry about damaging the finish on your framing hammer?

Why would anyone carry a gun in a holster that'll ruin the finish knowning there's another brand that will protect it better? A lot of people like to keep their tools looking new. My truck is a tool also but I don't intentionally run it through shit that going to mess it up.

Smitty