smith-wessonforum.com    Main Page  Hop To Forum Categories  CCW Methods & Issues    Model 10 2" IWB holster?
Go
New
Find
Notify
Tools
Reply
  
  Login/Join 
tschmittel
Member
Posted
Where can I get a nice secure IWB holster for my 2" model 10? I've looked and am stumped.
 
Posts: 9 | Registered: 12 March 2008Reply With QuoteEdit or Delete MessageReport This Post
flop-shank
Member
Posted Hide Post
Try Don Hume, Galco, or Mika for something good at a decent price. Our own member, Srigs (Sideguard Holsters) could set you up just as well I'd guess. You have no shortage of options for that type of gun and holster. Welcome to the forum.


Don't carry a gun because of what may happen today. Carry because once, just once, and at the least likely time imaginable, you may run into the worst monster you ever could imagine. Be their worst nightmare and resist them with all the stubbornness that our pioneer ancestors posessed. To do less is to be unamerican.
 
Posts: 3124 | Location: The Rust Belt Buckle/Michigan | Registered: 06 September 2006Reply With QuoteEdit or Delete MessageReport This Post
anchors
Member
Posted Hide Post
Try FIST gunleather.


Anchors
 
Posts: 507 | Location: Wilton,New York | Registered: 25 March 2005Reply With QuoteEdit or Delete MessageReport This Post
gold40
Member
Posted Hide Post
I use a Don Hume IWB with my 2" Model 64 (same gun in stainless), and am pleased.

JERRY
 
Posts: 436 | Location: St. Louis, MO USA | Registered: 29 January 2003Reply With QuoteEdit or Delete MessageReport This Post
Photoman44
Member
Picture of Photoman44
Posted Hide Post
I have a Kramer IWB clip that I've used with good results with my 2" M64 in the appendix position.


-Photoman

If it is possible, as much as depends on you, live peaceably with all men.
 
Posts: 2353 | Location: The Great State of Texas | Registered: 25 September 2005Reply With QuoteEdit or Delete MessageReport This Post
Srigs
Member
Picture of Srigs
Posted Hide Post
Welcome to the forum.

I can make any of my holsters for the 2" K-frame.


Srigs

www.sideguardholsters.com

"If everyone is thinking alike, then somebody isn't thinking" - George S. Patton
 
Posts: 2336 | Location: Twin Cities, MN USA | Registered: 27 October 2004Reply With QuoteEdit or Delete MessageReport This Post
sipowicz
Member
Picture of sipowicz
Posted Hide Post
quote:
Originally posted by Srigs:
Welcome to the forum.

I can make any of my holsters for the 2" K-frame.


Once you go made to order, you never go back....and his prices are comparable to off the shelf...even a little less... Wink






_________________________________________________
When a problem arises, sometimes Sipowicz is on the way!
 
Posts: 6963 | Location: Gun lovin' Hollywood Ca. | Registered: 09 August 2005Reply With QuoteEdit or Delete MessageReport This Post
wheelgun1958
Member
Posted Hide Post
I get good results from my Don Hume model 715.

M715


"Mandrake. Mandrake, have you never wondered why I drink only distilled water, or rain water, and only pure-grain alcohol?"

General Ripper
 
Posts: 2957 | Location: DFW TX | Registered: 21 March 2003Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

smith-wessonforum.com    Main Page  Hop To Forum Categories  CCW Methods & Issues    Model 10 2" IWB holster?

© smith-wessonforum 2008