smith-wessonforum.com    Main Page  Hop To Forum Categories  Reloading    looking for 44 mag cast 240lswc?
Go
New
Find
Notify
Tools
Reply
  
  Login/Join 
Member
Posted
Going to start reloading for the new 629pp. Thought I'd start with some 240gr LSWC in front of some bluedot. Any recommendations on boolit makers?

Thanks,

Greg
 
Posts: 6 | Registered: 17 September 2008Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
Try:

http://www.grafs.com/metallic/562
www.magnusbullets.com
http://www.mastercast.net


“They that can give up essential liberty to obtain a little safety deserve neither liberty nor safety.” Benjamin Franklin
"That's OK, I wasn't using my civil liberties anyway"
"guard against the impostures of pretended patriotism." from George Washington's farewell address.
 
Posts: 160 | Location: St. Louis County, MO | Registered: 13 November 2007Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
 
Posts: 278 | Location: Huntsville, Alabama | Registered: 04 September 2006Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
 
Posts: 365 | Registered: 16 October 2003Reply With QuoteEdit or Delete MessageReport This Post
ptk
Member
Picture of ptk
Posted Hide Post
I second Oregon Trail Laser-Cast (I live in Oregon; they are easily found or cheaply shipped here!).

240 gr. Oregon Trail Laser-Cast LSWC with the right amount of Blue Dot is an excellent medium load in my 4" 629. I am away from home or I would tell you my powder charge. I also use Trail Boss with the same bullet for light loads, but with some slight leading (no leading perceived in the medium/Blue Dot loads).
 
Posts: 21 | Registered: 07 July 2006Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
I strongly suggest that you look at Chey-Cast
http://www.cheycast.com/catalog.htm
Vanman


Sometimes I wonder whether the world is being run by smart people who are putting us on….or by imbeciles who really mean it.
Mark Twain
 
Posts: 182 | Location: Long Island, home of Teddy Roosevelt | Registered: 06 March 2005Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
quote:
Originally posted by Vanman:
I strongly suggest that you look at Chey-Cast
http://www.cheycast.com/catalog.htm
Vanman


I have never seen them before they seem to have the best price I have seen lately.

I have been getting my stuff from Powder Valley.
 
Posts: 46 | Location: Texas | Registered: 23 September 2008Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of frankw
Posted Hide Post
I have not used any of these bullets yet but they have some of the best prices I have seen.
They don't have a website but list prices here:

http://www.marlinowners.com/forums/index.php/topic,23847.0.html

Stonewall Bullet Co
 
Posts: 149 | Location: Georgia,United States | Registered: 29 August 2004Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
You might want to try Vance Bullets here in SW Ohio. I use them almost exclusively, very hard,accurate.
number is; 513-468-7713
 
Posts: 196 | Location: Loveland, Ohio | Registered: 02 March 2008Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

smith-wessonforum.com    Main Page  Hop To Forum Categories  Reloading    looking for 44 mag cast 240lswc?

© smith-wessonforum 2008