smith-wessonforum.com    Main Page  Hop To Forum Categories  Reloading    WST powder loads for 9mm
Go
New
Find
Notify
Tools
Reply
  
  Login/Join 
Member
Posted
any one have a good load date for WST in this cal.i shoot 115gr and 122gr lead


Duty is the sublimest word in our language,Do your duty in all things you cannot do more,You should never wish to do less.....Robert E Lee
 
Posts: 1381 | Location: NORTH CAROLINA..god save the south. | Registered: 21 November 2006Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
IMO WST is too fast a powder for 9mm rounds. You would be better off using WSF for the 9mm but be careful when loading with a Lead bullet, you might get some Leading if you push the bullet too fast. Winchester recommends a charge of between 4.0gr and 4.7gr of WSF under a 124gr LRN bullet. A charge of 4.6gr will get you right around 1000 fps from a 4" barrel.


_____________________________________________
A bad day of fishing is still better than a good day at work!
- NRA Member -
 
Posts: 1058 | Location: PA, USA | Registered: 07 December 2006Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
ok thanks ill just use the WST in 38 spl then.and stay with 231 an unique in 9mm.


Duty is the sublimest word in our language,Do your duty in all things you cannot do more,You should never wish to do less.....Robert E Lee
 
Posts: 1381 | Location: NORTH CAROLINA..god save the south. | Registered: 21 November 2006Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
If you are going to buy W231 then there's no reason to buy WST. I use W231 or Clays for all my .38 Special target rounds. It's clean and very accurate.


_____________________________________________
A bad day of fishing is still better than a good day at work!
- NRA Member -
 
Posts: 1058 | Location: PA, USA | Registered: 07 December 2006Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of Kamerer
Posted Hide Post
I used to use WST when I shot only .38spcl and .45acp.

Now that I reload .38, .357, .44spcl, .44mag and .45acp, I use 231 and 296 to cover all my needs.

What do you use in your 44 spcls? I am guessing you already have 231 on hand?


Physics 101: "Velocity" is speed and direction. Otherwise it's just "speed."
 
Posts: 2052 | Location: Seattle-ish | Registered: 05 October 2007Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
I've had great performance w/ WST in 9mm, it's only slightly faster than W231. I use 4.8gr under 124gr bullets for 1100fps jacketed & 1150fps cast lead. Go to 5gr under 115grFMJ for 1150fps. Very accurate in several 9mm.
 
Posts: 201 | Registered: 01 February 2006Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
i have for years used unique,231 in all my pistol loads.and i read that wst was good so i was just giving it a try.i data for 38 spl but not 9mm. thanks for the info ill try the 115 gr load.next ill try some hodgen brands.


Duty is the sublimest word in our language,Do your duty in all things you cannot do more,You should never wish to do less.....Robert E Lee
 
Posts: 1381 | Location: NORTH CAROLINA..god save the south. | Registered: 21 November 2006Reply With QuoteEdit or Delete MessageReport This Post
Member
Posted Hide Post
Anyone use titegroup in the 9mm, 357, 45 acp?]]
good results?
 
Posts: 151 | Location: Indiana | Registered: 27 September 2005Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

smith-wessonforum.com    Main Page  Hop To Forum Categories  Reloading    WST powder loads for 9mm

© smith-wessonforum 2008