|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
Member |
I got some 135 grn. plated 40s, that I intend to load with titegroup since I have 8 pounds. They recommend loading a powder charge the same as a lead bullet. However my manuals do not list the 135gr. in lead or plated. Does anyone have a book with the right info on this combination?
|
||
|
|
Member |
The Hodgdon 2008 manual lists 5.8 to 6.4 grains of Titegroup with the 135 grain Nosler JHP bullet.
Hornady case, Win SP primer, COL 1.125" Velocity from 4" barrel 1155 to 1251 FPS. Hope this helps. |
|||
|
Member |
As a rule of thumb you can drop jacketed bullet loads 1gr and get the same velocity from a lead bullet of the same weight.
SKIP USMC 1973-1979 Born Again 1983-Eternity! .................................................................................... (John 17:17) KJV Sanctify them through thy truth: thy word is truth. "Some people spend an entire lifetime wondering if they made a difference in the world. The Marines don't have that problem" - Ronald Reagan   Unashamedly Christian, American, Male, all three of which are currently under attack! |
|||
|
| Previous Topic | Next Topic | powered by eve community |
 | Please Wait. Your request is being processed... |
|
|||
| Site | smith-wessonforum | ||
| Servlet | eve2da035 | ||
| Version | 1.2.22 build 9062 | ||
| Module | Forums 4.0.3 | ||
| Stylesheet | "Eve" | ||
| Wordlet Set | "Default Wordlet Set" | ||
|
© smith-wessonforum 2008