Smith & Wesson Forum

Go Back   Smith & Wesson Forum > General Topics > Firearms & Knives: Other Brands & General Gun Topics
o

Notices

Firearms & Knives: Other Brands & General Gun Topics Post Your General Gun Topics and Non-S&W Gun and Blade Topics Here


Reply
 
Thread Tools Display Modes
  #1  
Old 09-16-2009, 10:13 AM
Milton's Avatar
Milton Milton is offline
US Veteran
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Aug 2004
Location: Birmingham,AL,USA
Posts: 1,378
Likes: 1,852
Liked 549 Times in 249 Posts
Default Rossi Model 68

I was just helping the wife clean up a room and deep in a drawer found a Rossi 38 revolver that we bought in the 80's.It has been fired 10 times in the 80's and no more.I took it apart and except for some expected machining roughness the little gun looked OK inside.Anyone had or have one of these?Are they worth keeping as a truck gun?
Reply With Quote
  #2  
Old 09-16-2009, 10:16 AM
Andy Griffith's Avatar
Andy Griffith Andy Griffith is offline
Member
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Dec 2005
Location: Out for the duration
Posts: 4,870
Likes: 62
Liked 520 Times in 264 Posts
Default

I'd definitely keep it as a truck gun.

They aren't worth very much at all, but they are useful if found reliable. A good cleaning and lubrication should make it so, but take it to the range and run 3-4 cylinders full through it to be certain there aren't any "bugs" in it that weren't discovered when you bought it since it hasn't been "rung out".

Have fun with it.
__________________
Lost it all in a boat accident
Reply With Quote
  #3  
Old 09-16-2009, 10:23 AM
BarbC's Avatar
BarbC BarbC is offline
Member
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Dec 2004
Location: Central FL
Posts: 3,829
Likes: 468
Liked 527 Times in 181 Posts
Default

My mother's got one of those. My dad wouldn't let her have it if he didn't think it was reliable.
Reply With Quote
  #4  
Old 09-16-2009, 10:53 AM
Milton's Avatar
Milton Milton is offline
US Veteran
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Aug 2004
Location: Birmingham,AL,USA
Posts: 1,378
Likes: 1,852
Liked 549 Times in 249 Posts
Default

Well if it is OK with you Mother and Father that sounds good to me !!
I plan on taking it to the range tomorrow and give it a "stress test" and see how it does with falling plates!
I know it is not a Smith and money value is of no concern but if it is fair enough quality as a part time carry piece that will be OK !
Thank you !!!!
Reply With Quote
  #5  
Old 09-16-2009, 01:02 PM
smith revolver cop's Avatar
smith revolver cop smith revolver cop is offline
Member
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Dec 2007
Location: SW Ohio
Posts: 824
Likes: 0
Liked 42 Times in 28 Posts
Default

I have a .22 Rossi revolver, and it's been very reliable. I'd say it's a keeper.
__________________
LEO since 1981.
Reply With Quote
  #6  
Old 09-16-2009, 02:24 PM
GatorFarmer GatorFarmer is offline
Junior Member
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Oct 2003
Location: Sheridan, Wyoming
Posts: 5,333
Likes: 159
Liked 3,889 Times in 1,361 Posts
Default

Rossi was a notch below Taurus in the 80s, and Taurus was worse then than they are now. Rossi managed some decent offerings at their peak in the early 90s (the .44 specials are somewhat sought after), but QC was hit or miss for much of their production life.

As a novelty or something to kill small animals sure. As even a part time carry gun? That's taking a chance that I personally wouldn't want to take on old Brazillian gun technology.

It'd sell for around 200 on an online auciton (or at least that's what they were going for recently during the gun rush), a dealer would maybe give you a 100 bucks for it if you're lucky.
Reply With Quote
  #7  
Old 09-17-2009, 02:30 AM
ChicagoGun ChicagoGun is offline
Member
Rossi Model 68  
Join Date: Jun 2004
Location: Western North Carolina
Posts: 15
Likes: 0
Liked 1 Time in 1 Post
Default

My Dad and I owned a small gunshop in central Florida back in the early 1980's and we had a lot those Taurus models come through. Very popular guns. Overall good but not excellent quality for the money.

Reliable, and often the lock up was very tight and desirable on most. They handled well, too. And yes, they are perfect as a bang-around truck gun. They aren't as durable as their S&W counterparts, but a gun such as the Taurus 68 is not to be treated as a long term range or sport target gun.

They are glove compartment or tackle box guns.
Reply With Quote
  #8  
Old 09-17-2009, 12:02 PM
Double-O-Dave Double-O-Dave is offline
US Veteran
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Dec 2007
Location: Central Texas
Posts: 4,162
Likes: 341
Liked 3,944 Times in 1,494 Posts
Default

I own a Rossi Model 720 in .44 Special that I got in a pretty good trade and it's been a fun little pistol to shoot the 240gr Magtech "cowboy" loads to see what the .44 Special is all about. I think it is probably as good as, if not better than the Charter Arms .44 Special offering. Here is what a gunsmith had to say about the Taurus revolvers - draw your own conclusions:

Why I don't work on Taurus revolvers | Revolvers, Gunsmithing, Personal opinions | GRANT CUNNINGHAM

Best of luck,

Dave
Reply With Quote
  #9  
Old 09-17-2009, 01:09 PM
Milton's Avatar
Milton Milton is offline
US Veteran
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Aug 2004
Location: Birmingham,AL,USA
Posts: 1,378
Likes: 1,852
Liked 549 Times in 249 Posts
Default

I just got back from the range and tried out the Rossi.Before I went I cut a round from both the trigger return spring and the hammer spring and the action now is not bad.Shooting single action off-hand at 15 yards produced 2 inch groups.The gun would easily clear 5 of six from the plate rack firing double action.(it only contains 5 rounds.)I will try it several more times to see if it will hold up under use.Not a Smith but not bad!
Reply With Quote
  #10  
Old 09-17-2009, 01:14 PM
sigp220.45's Avatar
sigp220.45 sigp220.45 is offline
US Veteran
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Dec 2005
Location: Colorado
Posts: 8,075
Likes: 27,784
Liked 33,565 Times in 5,253 Posts
Default

My Dad, who never saw a cheapo gun he didn't like, has one of the later Rossi 5 shot .38s as his "keep around the house" gun.

He takes it shooting once in a while, and since he never sees a reason to buy ammo as long as I'm around, I make sure he shoots .38 wadcutters in it. It goes off whenever he pulls the trigger, and he likes it, so everybody is happy. He's got better guns, but he has plenty of faith in that little Rossi. He's been in a war, and I haven't, so who am I to tell him different?

I think yours would make a fine truck gun.
__________________
“What you got, ain’t new.”
Reply With Quote
  #11  
Old 02-21-2016, 11:19 PM
gman51 gman51 is offline
Member
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Feb 2012
Location: Just West of Houston
Posts: 3,468
Likes: 787
Liked 4,674 Times in 2,062 Posts
Default

This is a very old post but I thought I would add some to it.
I have a Rossi model 68 38 spl blued and it is like new and even in the original box. I bought it back in the late 80's I believe for around $175. I also bought a Rossi model 88 which is basically the same gun only in stainless. It also is like new but no box with it.
Neither of these two guns have ever not fired when the trigger was pulled. Actually quite accurate and the trigger actions on both are very good in DA or SA. These both are 2" snubs.
These guns were actually pretty much clones to the S&W model 36 and were actually made by S&W engineers and machinist back when S&W and Rossi were under the same parent company umbrella. Sit these Rossi models next to a model 36 and they really are like clones.
While the S&W 36 can cost $400-$700 these Rossi models can usually be found in excellent condition for around $200 or lower.
Attached Images
File Type: jpg rossi snubs 38 002.JPG (153.9 KB, 257 views)

Last edited by gman51; 02-21-2016 at 11:22 PM.
Reply With Quote
The Following User Likes This Post:
  #12  
Old 02-22-2016, 02:49 AM
Big E3's Avatar
Big E3 Big E3 is offline
Member
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Nov 2013
Location: Colorado
Posts: 309
Likes: 341
Liked 711 Times in 197 Posts
Default

The Rossi 68 is very similar to the S&W 36. Here's mine, each in 3". I have since replaced the 68 grips with a J frame Hogue grip. It feels and looks better than the ugly wood it came with in the pics. The 68 has an adjustable blade rear site. I picked up this 68 about 8 months ago for $70 at my LGS. Not disappointed with it and it's perfect for my 89 year old dad who keeps it in his night stand.
Attached Images
File Type: jpg 2015-06-17 14.38.18.jpg (168.0 KB, 340 views)
Reply With Quote
  #13  
Old 02-22-2016, 06:20 AM
Milton's Avatar
Milton Milton is offline
US Veteran
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Aug 2004
Location: Birmingham,AL,USA
Posts: 1,378
Likes: 1,852
Liked 549 Times in 249 Posts
Default

I am still shooting mine!I really like the 3 inch barrel.Thanks for all the reply's!
Reply With Quote
  #14  
Old 11-08-2018, 05:46 PM
joeintexas's Avatar
joeintexas joeintexas is offline
US Veteran
Absent Comrade
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Dec 2010
Location: Pensacola, Fl
Posts: 4,388
Likes: 9,733
Liked 7,187 Times in 2,603 Posts
Default

A local pawn shop here has one listed for $200, I sold my truck gun the other day so am in the market for one to throw in the console. The price seems a bit high though from what I have been reading.
Reply With Quote
  #15  
Old 11-08-2018, 06:58 PM
Laketime's Avatar
Laketime Laketime is offline
Member
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Nov 2013
Location: Virginia
Posts: 3,147
Likes: 2,420
Liked 3,586 Times in 1,597 Posts
Default

Quote:
Originally Posted by joeintexas View Post
A local pawn shop here has one listed for $200, I sold my truck gun the other day so am in the market for one to throw in the console. The price seems a bit high though from what I have been reading.
This is an old thread,and prices are going up.Rossi makes a very nice revolver.I have two and have been nothing but impressed with these guns.
Reply With Quote
The Following 2 Users Like Post:
  #16  
Old 11-08-2018, 08:41 PM
sigp220.45's Avatar
sigp220.45 sigp220.45 is offline
US Veteran
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Dec 2005
Location: Colorado
Posts: 8,075
Likes: 27,784
Liked 33,565 Times in 5,253 Posts
Default

Quote:
Originally Posted by joeintexas View Post
A local pawn shop here has one listed for $200, I sold my truck gun the other day so am in the market for one to throw in the console. The price seems a bit high though from what I have been reading.
I don't think its too out of line. I have one that used to be my Dad's, and it is very nice little gun. You could probably beat them down a little.

__________________
“What you got, ain’t new.”
Reply With Quote
The Following User Likes This Post:
  #17  
Old 11-08-2018, 10:06 PM
31FordA 31FordA is offline
Member
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Jul 2015
Location: Pennsylvania
Posts: 1,385
Likes: 10,972
Liked 2,633 Times in 1,006 Posts
Default

I had a 3" Rossi 88 revolver for a long time, thought it was a very decent revolver for the money. Back in '99 I paid less than $200 for it new, but the last one I saw for sale used went for $275. If I didn't already have so many J frames I'd probably buy some of those old Rossi's when I run across them.
__________________
Wheel guns are real guns.
Reply With Quote
  #18  
Old 11-09-2018, 01:38 AM
shouldazagged shouldazagged is offline
Absent Comrade
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Feb 2013
Location: Louisville, KY, USA
Posts: 19,336
Likes: 53,737
Liked 38,386 Times in 11,801 Posts
Default

Over twenty years ago I bought a NIB Rossi 88--the stainless version of the 68--for $188.00.

I carried it for two years after having a smith bob the hammer and polish the innards. Reliable, quite decent trigger, shot well. Fit and finish were not much below a Smith 60, of which it was the clone. I liked it, but sold it when I bought a dashless Smith 640. I wish I had kept it.
__________________
Oh well, what the hell.
Reply With Quote
  #19  
Old 11-09-2018, 03:17 AM
merl67 merl67 is offline
SWCA Member
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Apr 2011
Location: Northern Middle Tennessee
Posts: 2,898
Likes: 3,413
Liked 4,084 Times in 1,449 Posts
Default

Had one for years accurate, and just a reliable as a Smith & Wesson made from S&W tooling I do believe.
__________________
Randy
Reply With Quote
  #20  
Old 04-25-2020, 09:37 AM
308 Scout 308 Scout is offline
Member
Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68 Rossi Model 68  
Join Date: Dec 2016
Location: North Texas
Posts: 111
Likes: 80
Liked 154 Times in 56 Posts
Default

Yet another resurrection-

I bought a nickel 3" Rossi Model 68 in about 2004 when we moved out of town on some property. I wanted it to stick in my pocket when I was working around the place. For years it bounced around under the seat of my pickup until I pulled it out and stashed it on a shelf in my shop.



It's always been a decently accurate revolver, but I hadn't shot it in years until a few days ago when the wife and I decided to shoot some of our .38's. I grabbed the Rossi. We shot at our 25 yd. steel silhouette and the little Rossi shot really nice little groups with handloads and my wife fell in love with it.

We had fired all but two rounds and I told the wife I wanted to see if I could hit the 16" steel gong hanging from my 100 yd. target stand. I shoot at it pretty regularly with my Model 10's, so know roughly the amount of holdover.

YouTube
Reply With Quote
Reply

Tags
gunsmith, lock, rossi, taurus

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rossi Model 88 3 Inch opaul Firearms & Knives: Other Brands & General Gun Topics 12 01-14-2017 09:08 AM
Smith and Wesson Model 36 Clone, A Rossi Model 68 Imported by Interarms lordhelpmeseewithtrijicon Firearms & Knives: Other Brands & General Gun Topics 16 06-02-2016 10:56 PM
HELP WITH ROSSI RIFLE MODEL 62 ajellydonut S&W-Smithing 6 04-28-2015 07:19 AM
Rossi Model 92 357 Mag. ancient-one Firearms & Knives: Other Brands & General Gun Topics 15 12-29-2012 10:50 PM
WTT: 2 Rossi model 62's rdm191 GUNS - For Sale or Trade 6 10-28-2009 07:28 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 05:39 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)