686-3 2 1/2 barrel on the forum . Thanks Sal .

__________________
-John

My latest purchase is a Chilean Model of 1912 in 7mm mauser, with bayonet. Long wanted a 7mm mauser but most 1895's have less than stellar bores. The bore on this rifle is fantastic literally shines. Bolt is matching to itself but in the same "A" block as the rifle. Had it apart and only found one rust spot and a little piece of the 3M green pad cleaned it away. Bluing is really nice and like the bare steel looks of the action. Have have some Hansen Cartridge 7mm mauser ball to try her out with. Frank

I bought a Advantage Arms .22 LR conversion kit for my Glock 29. Unlike the AA kit I owned for my Glock 26's, this kit actually works.

Bought this nice ( well used but not abused) 15-2(1964) "shooter".

__________________
John

Very accurate with .357, not to bad with Swiss-Army 9mm Luger.

..and now in April a new original frontsight directly from the manufacturer in France, 'cause the preowner grinded the Partridge-shaped to a target-shaped frontsight.

No picture allowed because of the unpredictable reactions of "one" member.
Sorry guys, but don't blame me for it!

Swissman

I have recently acquired this. Seldom seen in my parts and very lightly used by previous owner. Dates to 1978.

Bullseye,black powder,38 spl brass,bore brushes,patches and a brick of high end 22s

Would that be a Miroku ??

__________________
John

Goodbye Sig P938. Hello Mossberg MVP Varmint 5.56.

__________________
-John

Picked up some new grips this weekend for my 1911-22

__________________
Woulda, Coulda, Shoulda

This chunky little thing.



KO

That is the first series of production of Korth revolvers, chambered in .38 Special and made in 1964. It does not have the same double action bearing that Korth introduced in 1969 but is extremely well finished.

Despite its odd looks, probably inspired by Röhm, it shoots pretty well, much better and more pleasant than I had expected.

Bought a new pair of shoes for a .32 Regulation Police.

__________________
Regards,
Guy-Harold Smith II

10 pack of re arsenalled Polish AK mags

Sent from my SCH-I545 using Tapatalk

Hello, "[email protected]" here in Zuni Pueblo, NM...I am buying (back-owned before) a S&W S.S. 22lr/22 mag w/interchangable mag cylinder...4"..'J' frame(?), maybe on Model 63?...Has box and S&W screwdriver, Cleaning Rod, Very Good shape, has Adjustable sights...Can YOU or ANYONE tell me approx. value? I'm paying $500....Can't find this exact model anywhere on 'Net. Is it a $500 gun? I originally bought it new at Sprague's Gun's in Yuma, Az, 1984....made Post 1980?
Thanks, Folks,
Mike Debatto...."[email protected]"..in Zuni Pueblo, NM.

Latest pistol was I bought the wife a Glock 43 with laser sight as a bedroom gun (matches her carry gun). Also bought Pearce mag extensions, Tac Rack slide end (with small wings), Pearce filler plug for it.

While I was at it, I bought a drop-in 357 Sig barrel for my Glock 22. I fell in love==great caliber, better accuracy than the 40 S & W. Like it so much, I have a 357 Sig barrel on its way for my EDC (Glock 27). That must be my latest purchase, I guess.

Bought me a parts "gun" Colt "Brevete" (a wreck)
made in Belgum, just got to start looking for more parts

.36cal 5shot cylinder

Attached Images

Brevete.jpg (85.3 KB, 23 views)

__________________
Jamie wants big boom

Swapped for a Diamondback....

http://smith-wessonforum.com/firearm...080-snake.html

__________________
Even older, even crankier....

Just purchased a Ruger Blackhawk Convertible .45ACP/Colt last night. 4.62" barrel, can't wait to get it.

I recently picked up an eaa windicator in 357 magnum. has a 4 inch barrel, and blued finish....

its a good little shooter. Not bad for my first revolver.

Swapped for a HK P30SKS V3.....and wishing the weather would clear up so I can get to the range.......

Ahrends K/L frame Combats for my 2.5 inch Md 686. I hated the S&W Combats because the finger grooves didn't come close to working for my fingers. The Ahrends are perfect. Found them here on the forum. Thanks S&W Fan.

__________________
I'm gonna grow fins.

Ordered some bullets for my Martini Henry.


Sent from the Telegraph Office

__________________
RudyN
NRA Patron Life Member

Just ordered a RCBS JR press. Will be getting back into reloading after 40+ years


Sent from the Telegraph Office

__________________
RudyN
NRA Patron Life Member

I don't know if I am the only one but when I buy any gun model, I usually buy 3 each. I own practically every pocket and compact 9mm you can have. I recently bought 3 Gen4 Glock 30's. Love this gun and great for CCW.

Bought a set of Pachmayr gripper grips for my model 60 pro, fit great & seem to fit my hand great. Well pleased

A week ago today, I found a beautiful 1982 vintage model 63 in a local gun shop. Whoever owned it before took great care of it. It set me back $750 but I've been looking for a decent kit gun for a long time so I jumped. Only problem, being from CA, I can pick it up until this Saturday (10 day wait). If I knew of an easy way to post pictures on this forum I would, any help out there?

My Glock 23 4" .40 handgun stock until I get the upgrades in the mail tomorrow. The rifle below is my Daniel Defense MK18 10.3 short barrel rifle.

__________________
Shoot like a pro!

Not in my grubby paws yet, but I just added a worn-in CZ 99 to my modest collection of metal-framed 9mm pistols. Will post once it comes in

CZ 527 full stock in 223...

__________________
NICK-SWCA-NRA BENEFACTOR LIFE

-1000 rounds of 9mm.
-10 re arsenalled Polish surplus AK mags
-2 HK USP 45 mags


Sent from my SCH-I545 using Tapatalk

Ordered a set of dies for my Martini Henry (577/450)

__________________
RudyN
NRA Patron Life Member

Mine is in 40 too as is my present carry .. been extremely busy and between that and the weather have only put 100 rounds through it .. but just got my badge to get into new out door range so will be shooting a lot more in the next few weeks ..

But was very happy shooting it .. Very accurate .. Wanted one in 357 sig but this became available .. will just get a barrel and will be able to shoot that too..

New Tandemkross charging ring for the Victory today....

My very latest received last week is a ROSSI Plinker, 8 shot, 6 inch barrel.............I did not have a double-action .22LR revolver....now I do!!

Attached Images

Plinker.jpg (14.6 KB, 16 views)

I've been to a few shows since my last 'find' posted here, but with little to show for it. Seems the pickins' is getting pretty slim lately unless I wanted a flashlite, jerky or maybe some surplus socks. 22ammo seems to be going back up again.

About all I came back with are a couple of K frame holsters, one hip one shoulder and an old but good condition CH 'Champion' single stage press with a couple extra rams and a box of accessorys.
Included the sm&lg primer arms and a home-made 50cal what-something sizer die.
The press was $15 and I have a couple more of the rams,,each has the shell holder machined in the end. So you need a ram for each 'shell holder. Many of the old presses were like that. I'm covered for 38/347, 45/30-06, 222 and a couple others.

Something else to set under the bench and convince myself it was a good day at the show.
Still haven't shot the rifle I bought and posted the last time.

My wife and I picked these up in the last few days.

Her, a High Standard R-101, Sentinel, nine shot 22 LR with a 2 1/2" or so barrel. Made in the late 50's apparently, I found in interesting in that the color indicates to me that High Standard was thinking even back then of that female market we see so much of today.





Then I picked up this early Charter Arms 44 (Special) Bulldog. It's a Bridgeport, Conn. made gun so it's probably pretty early in the Bulldog history. Seems to be in good shape, and mechanically sound. The grips are a little large, but it will never see any kind of concealed carry duty. It's going to be a range toy for me. I've already got special brass, and bullets for it.

__________________
John 3:16 .

1000 rounds of CCI Mini Mags.

On my way to my LGS at 10:00 am New York time - will report back on my acquisition(s).

Edit: Happy to report I bought a Springfield Armory Range Officer Compact .45!
Sent from my iPhone using Tapatalk

Most recent purchase was 4 magpul Pmags , 50 rounds of 357 magnum and 50 more of 45 acp range ammo.


Sent from my iPhone using Tapatalk

IMG_1315.jpg

Picked it up yesterday. 60-7.

2 Glock 17 PMags for my Kel Tec Sub 2K.
2 ProMags for my ATI 1911
150 rds of 9mm (perfecta)
150 rds 45acp (federal)
100 rds 40sw (perfecta)

__________________
where's my thread?

Just won auction on a 1975 German made Walther PPK/S 380 cal. on GB auction.
Was hoping to loss as I also bid on another one I wanted more am I might win that also.

__________________
2B1ASK1

I bought a BG 380 & a Taurus .357 Magnum a few weeks ago.

__________________
Life is short,live it fully.

1927 Argentine Sistema 1911A1 in .45 ACP. Will post pictures later.

Just got this ugly cuss today, Ruger convertible .45 ACP/Colt.

Attached Images

20160509_194918[1].jpg (62.9 KB, 17 views)

I ordered two 33-round factory Glock stick magazines and a 17-rounder for my new Kel Tec Sub-2000 from Midway USA. Since they are being shipped by UPS Mail Innovations, the ****** UPS/USPS collaboration, I may receive them by the 4th of July!!!

I also got a Bolt Tube Cover for the same gun. I ordered it Saturday and got it, with free shipping, on Monday!! Now that is great service.

__________________
Miss My Buddy crsides!!

Just bought a new RCBS hand priming tool, Looks pfety nice but haven't used it yet. Easier to use than the old one which was over 15 yeas old and falling apart. I also deep 6'd a Lee priming tool that was also giving me trouble, and had a grey beard from age.