Nice. S&W is now using Altamont stocks as their OEM.
Great product and a good move by S&W

__________________
John

"Latest" in this case means I only picked this up 3 days ago, but "purchased" it April 7th! Darn ATFE paperwork/8+ month wait...
COLT LE6945CQB Factory M4 Carbine SBR:




•10.3” Monolithic Upper (w/MaTech folding rear sight)
•SiCo Omega suppressor
•Aimpoint CompML2 4 MOA/A.R.M.S. -17 TRI-LOCK
•Surefire X200 light
•MFT Minimalist butt stock
•Magpul pistol grip & VFG (+ 60 rnd. drum magazine)
•Hexmag 30 rnd. w/AZ flag graphic
•BeatenZone A.T.C.H.#7 charging handle
•Custom M8 bayonet

__________________
Bill - SWCA #2327

It will not make Santa's sleigh but it will arrive two days later. Will see if it helps my shooting accuracy.

Attached Images

laserlite.jpg (51.4 KB, 24 views)

Just got a S&W 66-5 2 1/2" , I love it already

My latest is a PSA Stainless barrelled AR 15 with a 1 an 7 twist rate that I added a Vortex Crossfire II 4x12x40mm AO scope.

My last two purchases other than grips for my Sigs, on 12/02 found a Ruger Redhawk 7 1/2 barrel in 357 Magnum, and on 12/26 found a Smith&Wesson 625-5 5 inch in .45Colt. I have no more funds, but two cool older revolvers.

Attached Images

	IMG_5551.jpg (65.3 KB, 27 views)
	IMG_5552.jpg (48.7 KB, 26 views)
	IMG_5548.jpg (73.7 KB, 28 views)
	IMG_5547.jpg (63.0 KB, 29 views)
	IMG_5555.jpg (58.0 KB, 30 views)

Christmas brought me a 686-6 performance center 357x7 2.5 inch beautiful piece of metal work S&W. I have yet to take it to the range....will be a blast to shoot. Life is good!! Did I say it has beautiful wood grips and finish. (sorry, I did not mean to get carried away). Have a great New Year everyone.

Picked up this early 1966 Colt SP1 at my LGS earlier this month.
It's all original. It came out of an estate in California and from
the looks of it hung on a wall or something. It had dust all over
the rear sight, front sight, and on the gas tube.

These early models used a roll pin to hold the buffer tube onto
the lower receiver. Also, the bolt carrier has no notches , and
the bore and chamber are not chrome lined.
The front sight base is cast instead of forged, and all the
steel parts have a nice brown patina to them. The safety se-
lector is dimpled on both sides too. Haven't shot it yet.

Attached Images

	IMG_9367.jpg (73.8 KB, 33 views)
	IMG_9369.jpg (71.2 KB, 27 views)

CZ 75 SP01 Shadow







Police turn in Model 640-1

Bought an old Colt A1 upper receiver with a teardrop forward assist, a repro aluminum stock, a charging handle, and an Aero lower. Needed the lower to get my old Colt Commando clone back up and running.

Very nice! I think the SP1 is my favorite, I found a '75 I'm hoping to buy shortly.

Just picked up a 5906 for $450 in good shape sn tzexxx any idea on age?

Sig 2022 (Pro) 9mm. $289

Sent from my XT1650 using Tapatalk

A Ruger LC9s Santa dropped it off, I have only fired about a dozen rounds, some FMJ and some HP, to be sure it was ok. There were no problems feeding any of them it's a small sample, I know, but will do more later on.
Steve W

Picked up a set of handmade grips for my matte stainless CZ75.

A Beretta M9A3 pistol and a Century Arms RAS 47 rifle










Sent from my iPhone using Tapatalk

Beretta Silver Pigeon I I didn't buy it my wife bought gave it to me for my birthday.

__________________
Use should dictate gear!

Picked up a new Kahr CM9 today.

Attached Images

002.jpg (132.9 KB, 324 views)

S&W Model 10-5

__________________
Mike
S&WCA #3065

Picked up a small Hornady lock box for the truck, a Pachmayr grip sleeve for my BG .380, and this Extreme.

Just joined a pistol and rifle club.
Does that count?

Yes! Ranges are mandatory imo.

Already had the .553 Sport now added the 10
shoots real well on the 100 and 300 yard ranges
with a Nikon buck master scope

29-2 and fallkniven F1

just brought this home last night model 437

I bought a SOG Traction Tanto folding knife and a Gerber straight blade knife made in Portland OR. USA!

__________________
Life is short,live it fully.

Regards,
Bruce

__________________
Regards,
Bruce

Added this little gal to my collection last week - M&P 15-22 Sport CT Compliant Model. I added the Hogue AR grip and a cheap reflex sight immediately after purchase, but had to forego the vertical fore grip to avoid committing a felony. Next, I may upgrade the trigger group, but as is, this rifle gets my vote for the best current-production semi-auto 22 rifle for under $500.

Also added to my collection in the last month:



- 2011 vintage Stoeger Cougar in 9mm - Essentially the same gun as the Beretta Cougar and the forerunner to the PX4 Storm pistols, with an alloy frame instead of polymer. The Stoeger model, and some of the later Beretta Cougars can interchange some parts with the 92FS, i.e. the hammer, sear, and mag release. Will add photos upon return from the gunsmith for adjustable sight install.

- Glock 36 - used, but practically brand new, and a great shooter.

and coming soon, probably next week, a Dan Wesson Model 22...

A #61 o-ring for my SW22.

__________________
Mike
S&WCA #3065

Same day:

65 year old K-38.



Brand new Adams Arms 308 Patrol Rifle. Swapped in a POF trigger, Silencerco brake, and Hi-Lux CMR 1-4x.

i found a left hand desantis sof-tuck holster for my s&walther ppk/s in stock after looking for a long while, and i also picked up 200rds prvi partizan 94gr .380acp and 100rds of hornady xtp 90gr(iirc) .380acp. put 75rds of prvi/25rds of xtp through my ppk/s, and 25rds of prvi/25rds of xtp through my ruger lcp yesterday.

Friday the 13th Colt 1911 circa 1917-18 Commercial Model.

Attached Images

	1917 1911 commercial 003.jpg (176.0 KB, 37 views)
	1917 1911 commercial 007.jpg (194.6 KB, 34 views)
	1917 1911 commercial 008.JPG (225.3 KB, 30 views)
	1917 1911 commercial 009.JPG (213.4 KB, 31 views)
	1917 1911 commercial 010.JPG (205.5 KB, 29 views)

1958 vintage single-six Ruger, xfer bar conversion but with all the parts and a box. $375, waiting to hear whether or not seller will bite.

Just picked up this Mauser byf 44 in very nice condition. Weird example with a non serial numbered receiver.

Note: After some research I find that it is not that unusual for the late war BYF's to have a non numbered receiver.

Attached Images

	Byf 44 # 37300 013.JPG (207.7 KB, 20 views)
	Byf 44 # 37300 004.jpg (197.8 KB, 23 views)
	Byf 44 # 37300 015.JPG (224.8 KB, 20 views)
	Byf 44 # 37300 008.JPG (223.6 KB, 22 views)
	Byf 44 # 37300 012.JPG (248.4 KB, 22 views)

Just got this 640-1 and I can't help but keep looking at it. It sho is purdee. I just love revolvers most of all.

Attached Images

S&W640 002.JPG (245.2 KB, 31 views)

(10) D&H 30 round 5.56/.223 aluminum mags with Magpul followers
and
(10) Gen2 30 round 5.56/.223 Magpul Pmags

$140 at PSA (today's daily deal)

S & W model 46, extra grips, an 80's something(working) red dot and extra mag $715 delivered to my FFL.
No cracks detected on the slide when viewed under maginification. Original black plastic grips are missing, wood grips on the gun are chipped but I knew that before purchasing, bore is clean and bright according to my FFL. Early gun serial # 27438 (guessing about 1959?)

Attached Images

S&W model 46 2.jpg (79.7 KB, 18 views)

__________________
Jim....aka...hognfrog

New grips fo my CZ P-01:

sig-sauer nightmare carry


Cannif tp9sf


new weatherby 243


old 10-8


and a calico m100s

Not a purchase, but rather a trade. The friend who traded me the first pistol he ever purchased, a Sig SP2022, regretted it and wanted it back. So I traded it back to him for a Springfield XD-s 4" Bi-tone. It's a nice gun except for the trigger.

The trigger on the XD-s is over 8lbs, hard mush to the break, reset farther out than it needs to be. A $70 Powder River Precision spring and sear kit would bring the trigger down to 5 - 5.5 lbs, shorten the reset, but still would have a soft mush before the break. I don't think I want to put $70 and time into the XD-s. It will end up being trading fodder.

__________________
-John

My last purchase, merry Christmas to me, was a S&W second/sample gun. It is a Smith & Wesson M&P15 VTAC LE. It has a VTAC lower and a TS upper. It came into work in a shipment with about 60 other seconds and sample guns from Smith & Wesson. The price was just to good to pass up.

__________________
Bill Bates

Picked up a Remington 870 "clone" this weekend - H&R Protector (12ga.)

Got the exact same workbench as you, too.

__________________
Stay protected my friends.

let the wife pick any Kimber she wanted, I would have bet on one of the jewel line, bel-air or at least a raptor but she picked this
its a shot show limited run

Micro 9 with CT LG

For my Glock G27, 9mm conversion, a KinetiTech flat faced trigger, and +2 Hyve mag extension.
For my G22, a StormLake 9mm conversion barrel.

The latest two additions.........in later part of the year were a Kimber Ultra Carry II 9mm in Sapphire and a KelTec Sub2K Gen 2 40 cal Glock mags (honey, it's really a house gun for yooouuuu!).

In addition to the other acquisitions last year, I think the Missus has put me on probation or something.....I don't know, sumthin about cutting my access off to something or other...not sure what she meant by that!!!!! LOL!!!!

Came across a deal that was too good to pass up on a S&W 442, another Shield 9, 2,000 rounds of 9mm and 500 rounds of .45ACP.

Picked up a Azula OWB holster for the new S&W 442. I've been wanting to try them out for sometime now. I didn't have a holster for this particular handgun so I figured now was as good of time as any. I have to say the overall quality is great. For a handmade leather holster under $50 I don't see how you could go wrong.

Found a good deal on a Grade 2 Fat 50cal, Grade 2 standard 5.56, and Grade 2 30cal ammo boxes so picked them up. Also ran across a deal on a "used" set of Crimson Trace grips for the 442.

CT LG 902 for Kimber Ultra CDP II

Sig 2022

Sent from my XT1650 using Tapatalk

Just picked up a very nice 1958 Walther P38 and after a day at the range she ran great. I have to drift the front site a little, but overall she is a great purchase.