NOS grips for the Ruger security six

Attached Images

s-l1600m.jpg (77.5 KB, 27 views)

Latest firearm to the mix is an AR, the one prominent hole I had in the lineup.

Radical Firearms RF 15, in .223/.556. 16" barrel, 12" front grip, no optics, full accessory rail, ambidextrous safety. Just picked it up from the FFL Tuesday. I got it from Indian Springs Armory out of Tennessee, was $475 (not a kit, a complete rifle).


Since I had nothing current for this, I had to add ammo and magazines too.

Ruger M77/357
A nice used Ruger bolt action in 357 mag, equipped with a Leupold 3x9x40


Sent from my iPhone using Tapatalk

Picked up this GP100 in 44 special from Six6killer. Unfired, unusual five-shooter. I like it a lot.

Attached Images

	GP100-2.jpg (97.3 KB, 35 views)
	GP100-1.jpg (92.7 KB, 22 views)

__________________
Heavily armed old man.

More ammo from Lucky Gunner 100 rds PMC Bronze .357 mag 158 gr JSP. Midway USA Pachmayr Diamond Pro Grip and spanner wrench for Mossberg 500. The diamond Pro's were out of stock several months Midway has them now on sale.

Picked this super clean 4 inch, all steel 8 shot 22 magnum this week. Taurus model 941 with full lug barrel. 22 magnum in a J frame size. Doesn’t appear to have been shot much

Kelly

Attached Images

BB5E4799-F429-46BC-9817-B45C0F9B2675.jpg (31.5 KB, 29 views)

Just received the extended magazine case plate for my Sig P365XL. Holy cow! What a difference. Should be receiving my Hogues grip sleeve in a couple of days; which I now doubt that I will need given the vast improvement made by the TD base plates. Next purchase will be in IWB/OWB holster from Hidden Hybrid.

__________________
otis

A Gen3 Glock 32. Think it may become my new ccw after I’m proficient with it.

__________________
Some Might Say.

I just couldn’t resist rescuing a 1937 Colt officers model heavy barrel, modified with a King front and rear sight. The gun is well worn but still has plenty of life in her, and I simply couldn’t walk away from a poor old gun that if it could talk, what stories it could tell. I have an ejector knob on the way to make her whole again. I try, but resistance is futile.......

Actually got several lately after a dry spell.

First a Ruger 57 in 5.7x28




Model 19-7 K Comp




Also got a Model 19-3 Texas Ranger Commemorative, but have not photographed it yet.

__________________
Bill

Found a Swiss WW2 trench shovel with a nice leather sheath at a sale today.








Sent from my iPhone using Tapatalk

Picked up a pretty nice M57 no dash at the gun show yesterday No factory stocks and has some sort of add-on vent rib, but a very clean and solid gun.

And a picture of the CZ shotgun I got last week. Took it out for two rounds of skeet today, it shoots better than the guy pulling the trigger. The CZ is on the bottom, along with my Fox B

Attached Images

	DSC01656.jpg (176.3 KB, 43 views)
	DSC01642.jpg (150.4 KB, 37 views)

I especially like your 66-2. It looks brand new. I have one from the same year, but mine is a transitional model. It has a pinned barrel. It was my first gun purchase when I was old enough. It is still one of my favorites too. What is the serial number on yours? I am curious how far away it is from mine.
Larry

__________________
Miss My Buddy crsides!!

Picked up a new in the box Remington 870 express 25569 with a 26” barrel....because....I don’t know. It was only $240 and if I didn’t buy it, someone else would have!


Sent from my iPhone using Tapatalk

I just picked up a complete GSG 22LR conversion kit for my 1911.
Figured that for $140 I couldn't go wrong since they go for $200-$250 if you can even find one.

__________________
Send lawyers, guns & money...

Received my Lee APP Monday from Titan Reloading. I set it it that afternoon.The only trouble I had was the slide had a mold mark on it and wasn't letting the case slide smoothly into the fingers. A finger nail file some graphite and the problem solved. This thing is really pretty well built. Will it out last my Dillons, probably not. but for $75.00 I'm fairly certain I will get my moneys worth out of it.

Attached Images

	IMG_20200630_092317583.jpg (63.5 KB, 30 views)
	IMG_20200630_092402295.jpg (78.3 KB, 30 views)

Is that their newest progressive?

__________________
Send lawyers, guns & money...

Finally got the WWII gun I’ve wanted for decades.

__________________
Sure you did

I picked up a new gen4 Glock 30 yesterday.

Wasn’t planning on buying anything but found a gently used gen3 Glock 26 at a LGS a couple towns over. Would have been a good price even precovid.

I’ve been wanting a double stack Glock to match up with my Ruger PC9. Will mostly run Glock 19 mags in it with a sleeve but I like the option of going short if I decide to carry it.

Yes, it is. I think John Lee got the patent on it in February.

Very cool. I may have to pick up one of those.

__________________
Send lawyers, guns & money...

In the last week I have bought 3. A really nice Rem 742 30-06 a Mauser HSc that seems to be unfired and yesterday I picked up a Rem 700 BDL varmint/target barrel in 308. It is in at least 98% condition and has an older Weaver K-10 with AO. The scope looks as nice as the gun. I also have a line on a NIB handgun that I hope I can pick up this week

Picked up the Webley MkIV yesterday.

As I said before. Keeps good company to it's "cousin" and bigger brother.

Attached Images

	20200704_152035.jpg (89.9 KB, 233 views)
	20200704_152325.jpg (75.1 KB, 230 views)

__________________
Expect the unexpected

I was tempted by a little Mauser 1910 in .25 ACP.

So I marked it as mine.

__________________
Expect the unexpected

Well it continues.....I tell myself to stop but when you see some cool things it is hard to resist. I’m usually a colt guy in the AR 15, AR 10 platform but became intrigued about one of these modular guns. LMT barrel, upper, lower, bcg and a charging handle and that is all it takes to build your .308, or any other big caliber you might want.

The barrel is simply plug and play with two screws that retain it in the upper.....so when you want a 6.5 change out the barrel.....A way different approach than the Colt 901 modular version that you have to change out the whole upper, but then that is switching between the AR 10 and the AR 15 platform so not really an apple to apples comparison. One day I will simply say no......
.

Harbor Freight ammo cans

Attached Images

0709200814.jpg (87.9 KB, 23 views)

After much hemming and hawing I bought a Rossi 357 lever gun and couldn't be happier. I reload 38. It took two range trips but I've found a load it likes, and it's good out to 200 yards.
Fun gun, and for me that's what it's all about.

Attached Images

rossi1.jpg (102.2 KB, 22 views)

Two boxes Silvertip 147gr JHP and two Fed. 124gr JHP at a good price from GrabAGun

Attached Images

	110237.jpg (200.7 KB, 10 views)
	110327.jpg (179.9 KB, 11 views)

Got this set of grips for my PPK

And just what would that load be?

Went out looking at Shotguns.
Bought a Ruger 1022.

Attached Images

1EF027F3-EA68-4F9B-9D59-494E81096513.jpg (118.5 KB, 22 views)

__________________
NRA LIFE MEMBER

Bought this today from the big gun auction site.

CZ Scorpion EVO 3 S2

I'm going to short barrel it.

Already ordered a pull out stock similar to the brace CZ puts on some of them , replacement right side safety, pistol grip and a bunch of Magpul 35 round mags.

I'll put some type of red dot sight on it, and a 9mm silencer.

KleenBore .22 cleaning kit just because it was finally time for another one, nothing excited but gun “related.”

__________________
Some Might Say.

I purchased a 1022 mag release lever, it’s a Butler Creek.

Also purchased a magpul Battery assist device for my AR pistol.
Papa


Sent from my iPhone using Tapatalk

I got a nice PT145 hybrid IWB holster out of the bin at my LGS yesterday for $20. Just what I needed since I'm carrying the PT145 until I get my LC9 back from Ruger - and maybe even afterwards. With the way things are going these days I'm kind of liking 10+1 of 45ACP better than 7+1 of 9MM.

__________________
Send lawyers, guns & money...

Picked up another 17-3 very nice shape, an 8 inch Jet barrel and a 22lr cylinder for same. Also a 32 Magnum reamer,now where did i put those 22lr cylinders! Boy this list is reallyyyyy long. And a couple of target hammers for a Jet.

__________________
"I'm feeling MUCH better now"

Found this mint early import ( SN 306XXX-ca.1991) Norinco. Been looking for one for another mild custom job. I've built two others over the years using the Norinco platform. They have excellent steel, priced right, and exact Colt tolerances

__________________
John

Almost forgot.

Seller's picture of the Mauser.



It will make good company to it's older bigger sister.

Attached Images

	MAUSER DSC00014.jpg (107.6 KB, 142 views)
	Mauser 1910 (2).jpg (54.7 KB, 138 views)

__________________
Expect the unexpected

Midway USA straight grips for 5906 and 400 RamRodz bore swabs

Attached Images

0717201814.jpg (56.1 KB, 19 views)

Picked up a Shield 2.0 9mm yesterday. Had to see it compared to my 642-1

Attached Images

6BEE42FE-BDBD-4DD7-A894-59AF60A22471.jpg (92.3 KB, 15 views)

Couple hundred rounds of 7.62X51 and a couple spare mags for my .40 Shield...

My latest is a used S&W 5946. I also decided to get a complete 6946 slide to use for concealed carry.

Latest firearm- followed my gut feeling, and managed to pick up another (relatively) inexpensive AR.

Radical Firearms, 16" barrel, 15" foregrip, 556 chambered. Probably a month before it comes home with me , but at least it's bought and will be coming at a fairly decent price.

My son gave me the stinkeye when I got the first one, and he discovered "it wasn't for him"! He's wanted one longer than I did.

This is the stock photo


Latest non-firearm stuff; bought a case of Tula 223 for $250, a case of Tula 7.62 for $210, and got 8 30 cal ammo cans for total of $79 shipped.

SAR K2-45 C

Why? Who knows. I like traditional double action guns and it's a nice big chunk of all metal gun with a 4.2 inch barrel. Range report down the road.

SIG P232 .380 ACP

Why? because it's the raciest, sexiest, best looking pistol ever made, that's why, and they don't make them anymore.

GSG Firefly .22 LR

Why? Part of a deal I made; it shoots great with a suppressor on it.

STAG AR M4 type rifle.

Why? I sold one of my Bushmasters (I could list the other one on here, I suppose) and two is one and one is none so now I have two ARs again.

Then there is the AR pistol but I don't have that yet and it will be suppressed - because I can.

Pictures later................

__________________
Come and take it!!

Got 2500+ rounds of 45 auto once fired brass. small pistol case feed plate for Dillon for 10 bucks and some coated 45 bullets...well ordered...and I bought a neat little Llama 1911 style 22 auto handgun and a new AR 15 with fixed stock and 20 inch bbl. I did not get the Walther TP 22 I looked at yesterday. The fellow gave it to his daughter in law.. The AR was priced extremely well esp for today's availability and prices

After buying my CZ Scorpion, and a silencer kit. I figured i needed a pistol to use the silencer on too.

Then I thought it would be a lot cheaper to buy a Alpha Wolf 40 to 9mm conversion barrel for my Glock 27.

Bought 6 Glock 26 mags. Ordered 6 Pearse grip extensions, but won't get them for a couple 3 weeks.

Also found out Sig makes a threaded barrel for my P365.

Shiny Cold Detective Special

__________________
Robert
SWCA #2906, SWHF #760

Today I bought a 66-1, with 2 1/2" barrel. Carried one as a Detective on the PD, and had one years ago, but foolishly sold it.
When the Dept. went to Sigs, they sold the Model 66's, and we could buy ours for $75.00. I bought both my 4" and the 2 1/2", and several years later sold them.

Bought another 4" to replace the one I sold, and this 2 1/2" cost me a lot more than $75.00.

A +2 extension for the tube on my 870 Police Magnum. I like 870s and this one was a Police trade in in stock configuration. Should be a bit more useful now!