|
|
05-27-2015, 12:55 PM
|
Member
|
|
|
Join Date: Apr 2014
Posts: 48
Likes: 17
Liked 4 Times in 4 Posts
|
|
colt python electroless nickel 6" NIB value?
Hello maybe somebody can help me on a value on my nib colt python electroless nickel factory fired only. was told they only made this nickel finish for 2 years ? Does that increase the value or no big deal? Would post pics but dont understand how to. thanks any help would be appreciated
Last edited by rossco; 05-27-2015 at 01:02 PM.
|
05-27-2015, 01:16 PM
|
SWCA Member
|
|
|
Join Date: May 2008
Location: Peoples Republic of Calif
Posts: 4,644
Likes: 1,226
Liked 5,988 Times in 2,133 Posts
|
|
I have seen nice blued Pythons going here in CA or prices approaching $2,000. I couldn't guess if the stainless would be worth more or less. To me, it would be less, but I like blue steel guns.
|
05-27-2015, 01:36 PM
|
|
Member
|
|
|
Join Date: Aug 2013
Location: Connecticut
Posts: 326
Likes: 91
Liked 153 Times in 88 Posts
|
|
$3000-4000 easily assuming the box is original and has the end label. Maybe more. I know I've seen a few good used shooters w/o box go for close to $3k lately. Unfired usually adds a good bit to the value
|
05-27-2015, 01:39 PM
|
Member
|
|
|
Join Date: Apr 2014
Posts: 48
Likes: 17
Liked 4 Times in 4 Posts
|
|
Hu wow ya the original box etc etc serial number matches the number on box
|
05-27-2015, 01:44 PM
|
Member
|
|
|
Join Date: May 2013
Posts: 604
Likes: 21
Liked 660 Times in 284 Posts
|
|
The Python is a beautiful revolver. Finding one NIB is a rarity and it would be $4000 easy. Having said that, if it were me I'd buy 3 or 4 S&W model 27-2s in good to excellent condition instead...but that's just me.
|
The Following User Likes This Post:
|
|
05-27-2015, 01:46 PM
|
|
US Veteran
|
|
|
Join Date: Jun 2014
Location: Copenhagen, Denmark
Posts: 1,171
Likes: 2,972
Liked 3,764 Times in 684 Posts
|
|
__________________
USAF AMMO
Last edited by GunarSailors; 05-27-2015 at 01:48 PM.
|
The Following 3 Users Like Post:
|
|
05-27-2015, 01:55 PM
|
|
Member
|
|
|
Join Date: Aug 2013
Location: Connecticut
Posts: 326
Likes: 91
Liked 153 Times in 88 Posts
|
|
Is that e-nickel or bright nickel? looks a little shiny for e-nickel (I have an 8" e-nickel) - also you have the outer sleeve etc for the box? Box would say coltguard or e-nickel. Nice python regardless -Dan
|
The Following User Likes This Post:
|
|
05-27-2015, 02:14 PM
|
Member
|
|
|
Join Date: Apr 2014
Posts: 48
Likes: 17
Liked 4 Times in 4 Posts
|
|
Thanks gunarsailor for posting the pics for me but yes i have the outer sleeve its just the way i took the pic was told some E-nickel models came out a little more polished then others
|
05-27-2015, 02:30 PM
|
Member
|
|
|
Join Date: Jun 2013
Posts: 705
Likes: 5
Liked 3,655 Times in 420 Posts
|
|
That is a very nice python, but not E nickel, unfortunately. That actually looks bright stainless. Furthermore, the Styrofoam sleeve and manual looks to be a later vintage than an E nickel Python would be.
Here's an electroless nickel model from 1981. They are much more matte in appeance.
|
The Following User Likes This Post:
|
|
05-27-2015, 02:45 PM
|
Member
|
|
|
Join Date: Apr 2014
Posts: 48
Likes: 17
Liked 4 Times in 4 Posts
|
|
Yes it is a E- nickel 1981 if you look on tip of the muzzle its matte If it was polished it would also be shiny. Also look around the rim of the trigger guard its matte also its just the way i took the pics
|
05-27-2015, 02:48 PM
|
Member
|
|
|
Join Date: Apr 2014
Posts: 48
Likes: 17
Liked 4 Times in 4 Posts
|
|
Bc 1023 ill happy to send you more pics to your email if you would like
|
05-27-2015, 03:11 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2013
Location: Dallas, Texas
Posts: 8,389
Likes: 2,476
Liked 13,054 Times in 4,535 Posts
|
|
Pythons go for some crazy prices on the auction sites these days. 4 grand wouldn't surprise me. It's nuts but that's how things are.
|
The Following User Likes This Post:
|
|
05-27-2015, 03:15 PM
|
|
US Veteran
|
|
|
Join Date: Jun 2014
Location: Copenhagen, Denmark
Posts: 1,171
Likes: 2,972
Liked 3,764 Times in 684 Posts
|
|
__________________
USAF AMMO
Last edited by GunarSailors; 05-27-2015 at 03:18 PM.
|
The Following User Likes This Post:
|
|
05-27-2015, 03:24 PM
|
|
Member
|
|
|
Join Date: Aug 2013
Location: Connecticut
Posts: 326
Likes: 91
Liked 153 Times in 88 Posts
|
|
nice, yes enickel, it looked shiney-er in the first pics. $3500 minimum, $4000+ to the right buyer... see if you can find the original grips though...
|
05-27-2015, 04:08 PM
|
Member
|
|
|
Join Date: Apr 2014
Posts: 48
Likes: 17
Liked 4 Times in 4 Posts
|
|
Actually those are the correct factory colt rubber grips this was given to my god father probably in the mid 80's from a friend of his that owns a gun shop here locally . He was told never to shoot it leave it the way it is put it away and he did. Now i have it in the same condition the way it was when it was taken out of the store. Ive done a little research on the grips and have read that the e- nickel model both came with wood and rubber factory grips then shortly they made the stainless steal model that also came standard with the factory rubber grips . I also ask my self why would anyone in there right mind switch out the original grips on a nib python and not keep the originals??
|
The Following User Likes This Post:
|
|
05-27-2015, 04:39 PM
|
|
Member
|
|
|
Join Date: Jan 2012
Location: Cape Town, South Africa
Posts: 852
Likes: 479
Liked 469 Times in 320 Posts
|
|
That is very nice, very nice indeed. Smith lover or not the 6" Python is a great looking revolver.
|
The Following User Likes This Post:
|
|
05-27-2015, 07:18 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2009
Location: SE Mich - O/S Detroit
Posts: 3,159
Likes: 2,026
Liked 2,801 Times in 1,017 Posts
|
|
Quote:
Originally Posted by rossco
... I also ask my self why would anyone in there right mind switch out the original grips on a nib python and not keep the originals??
|
When Colt switched over to the "3rd Generation" stocks for the Python, the checkering became more aggressive. Spending time at the range using the original stocks became very painful after 40-50 rounds. I found out the hard way with my 1978 Python. After a few hundred rounds, I went to a LGS, and he showed me a set of Herrett's Shooting Masters. They were finger-grooved, and had smooth sides. I bought a set, and also picked up a set of Pachmayr Presentation grips. I almost left the originals with the LGS owner, but thought otherwise, and took them home to be left in the box. Since Pythons were in current production, folks probably didn't give it a lot of thought if they changed out the stocks. You could get a new set then for around $30.
I modified the Herrett's by sanding down the back strap, cutting a small "thumb rest" in the left panel, and refinished them using Tru Oil. Those grips have remained on that gun since 1979, only removed for cleaning. Over 3K rounds through it.
I own two other, older Pythons, and both have the "2nd Generation" stocks on them. They're much more comfortable for shooting.
|
05-27-2015, 10:10 PM
|
|
Member
|
|
|
Join Date: Aug 2013
Location: Connecticut
Posts: 326
Likes: 91
Liked 153 Times in 88 Posts
|
|
Quote:
Originally Posted by rossco
Actually those are the correct factory colt rubber grips this was given to my god father probably in the mid 80's from a friend of his that owns a gun shop here locally . He was told never to shoot it leave it the way it is put it away and he did. Now i have it in the same condition the way it was when it was taken out of the store. Ive done a little research on the grips and have read that the e- nickel model both came with wood and rubber factory grips then shortly they made the stainless steal model that also came standard with the factory rubber grips . I also ask my self why would anyone in there right mind switch out the original grips on a nib python and not keep the originals??
|
Sorry, I was looking at gunarsailors pics thinking they were yours.
|
05-27-2015, 11:53 PM
|
Member
|
|
|
Join Date: Jul 2014
Posts: 303
Likes: 14
Liked 672 Times in 121 Posts
|
|
Those aren't the original grips. A lot of the E-Nickel pythons did come with rubber grips but not all of them. Some came with the Gen 3 walnuts. Either way, the rubber grips were not finger grip style. A correct set of rubbers will run less than $80 either way so its not a huge deal. A NIB E-nickel 6" would go for anywhere from $3800 to over $5k. That is an extreme case but the right seller, at the right time of the year and with at least two guys that really want it can produce some high numbers. This particular seller gets a lot of money for his auctions on a routine basis.
Colt Python 6'' Enickel Original Box 99% : Revolvers at GunBroker.com
|
The Following User Likes This Post:
|
|
05-28-2015, 06:30 AM
|
|
US Veteran
|
|
|
Join Date: Jun 2014
Location: Copenhagen, Denmark
Posts: 1,171
Likes: 2,972
Liked 3,764 Times in 684 Posts
|
|
Quote:
Originally Posted by 68sixspeed
Sorry, I was looking at gunarsailors pics thinking they were yours.
|
Those pictures are of his Python, I don't own any Colts.
__________________
USAF AMMO
|
05-28-2015, 07:08 AM
|
Absent Comrade
|
|
|
Join Date: Jan 2011
Location: Planet earth
Posts: 13,869
Likes: 2,079
Liked 13,353 Times in 5,549 Posts
|
|
Around here for $2k they gather dust.
My Colt awesome colt is the officers target revolver 22cal 6" barrel.
|
05-29-2015, 10:45 PM
|
Member
|
|
|
Join Date: Jul 2014
Posts: 303
Likes: 14
Liked 672 Times in 121 Posts
|
|
Quote:
Originally Posted by BigBill
Around here for $2k they gather dust.
My Colt awesome colt is the officers target revolver 22cal 6" barrel.
|
Not sure what you were saying but: If you are saying you can get LNIB E-Nickel pythons for $2k, I will gladly take 5 of them.
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
|
|
|
|