Anyone got one? Dad bought one back in the early 70's. IIRC it was a 541-S and in addition to being quite an attractive rifle it was pretty darn accurate and more than a little expensive for a rimfire.

I've kept an eye out for one locally but have never run across one. Was wondering anyone has or had one and if so would they be kind enough to share some pics and opinions on it? TIA

__________________
BCCI Life Member #2068

I had one 10 yrs ago, my brother has it now. I had the 541S,
pretty gun, no issues with it. Was not what you expect for accuracy. Wasn't bad for a sporter 22, but not a target gun. I was
kinda peeved with the plastic magazines. For the money Rem
could have used steel ones. They worked ok. I had bought a 513
Rem and let my bro have the 541s, he swears by it. Going down
his place this weekend, if I remember will take pic. Rifle did best
with CCI Green Tags.

I remember the mags. Seems like it came one, maybe two 5rd mags. I think Dad tried to order 10rd mags from Remington but they either never came or were the wrong ones. Back then with no internet things were a lot slower to purchase and there wasn't much in the way feedback or reviews outside of magazines.

__________________
BCCI Life Member #2068

I shoot a Remington 541T in rimfire silhouette matchs locally, it shoots nearly as well as my Anschutz 54MS ( I haven't shot any 40x40's with either ...but the 541 has delivered many 38/39x40's . Both are equipped with Weaver T-16 scopes.

I don't load through the magazine however, I prefer to single load it to feel the cartridge seating in the chamber.

I just bought one on consignment from the LGS. $600 which was a price I could not pass on. They are a quality 22LR, at the time one of Remington's most expensive. The magazines are cheap plastic but work for the most part. Stay away from the 10 round ones they don't.. Mine at its first time to the range keep several types of match 22LR into 1/2" or less at 50 yards. So they are accurate. The triggers are wonderful considering they are a Remington.

They're great guns!

I own a few 541's. One of my favorites is a customized 541S and another a later HB 541T. Both shoot really well and will accept Model 10C magazines. I also came across a metal 10 round magazine that fits, but I have no idea who made it.

This is a standard 541S in the bottom of the case:


This is my customized 541S:


If I get some time, I'll take and post a photo of my 541T HB.

__________________
"I also cook."

There is a flawless 541-t at a LGS for $800. A fair price IMO. If it were an s I would already own it. I had an s a couple years ago but like a fool I sold it. $800 will buy a revolver I don't yet own so...

I think a magazine for any of the 500 series rifles will fit the 541.
I don't remember what the model number of the Rem, that my
brother sold when he got the 541s off me was. He sold it with
the plastic 541s mag and kept the steel clip from his old gun to
use in 541s.

I am unaware of any steel clips that fit the 541S, the model 77 from other models will fit but it is plastic. There are aftermarket clips being made, but have not seen a true metal one yet.
Might be a bad thing to post, not sure but; rimfirecentral is the best place for info. Just like this is the best place for S&W info.

I owned one of the early 541S models with the engraved receiver. It shot CCI standard velocity and Ely Ten X to the same point of impact into virtually one hole groups at 25 yards. I bought my Dad a later model 541S with the satin finish stock and it shot equally as well.

I even acquired a 540 target model to shoot prone at 100 yards for long range practice and it would hold the 10 ring of the SR1 repair center with CCI standard velocity. It helped me learn how to shoot prone. I believe it that the actual model was 540 XR but, I could be wrong. This was a single shot model.

I'd love to see a photo if you have time

__________________
BCCI Life Member #2068

I have an early Remington 541S.

It's nice enough to be considered an higher end mass production .22 Rimfire. The wood is nice, it uses a fake rosewood tip and the checkering is pressed but nicely pressed, and the engraving is machine engraved, but the rifle is still very attractive. And it's a very nice adult proportioned .22 LR sporter.

As someone noted above the plastic magazines are a pain. They tend to crack on the seam and then start puking out bullets. The 5 round mags are better than the 10 rounders, but they are hard to find - and much more expensive.

Accuracy wise, mine is a solid 1.5 MOA to 1.75 MOA rifle with 5 shot groups at 100 yards with mid grade ammunition like SK Standard Plus.

It will not shoot as well as either of my Model 52R Sporters or my CZ 453 American or CZ 453 Varmint which are 1 MOA to 1.25 MOA rifles under the same conditions. It shoots slightly better than my much less expensive, but still adult proportioned CZ (the other CZ) 99 Precision / Remington Model 5, and about the same as my Savage Anschutz Model 64 Match.

I have one, shoots better than I can. Yes, those plastic magazines are tacky, but function. Recall an article in one the gun magazines/annuals where the author described how to bed the stock and turn it into a real tack driver.

Bought one on this forum a couple of years back, LNIB, mounted a 50 year old wide view 4x Redfield on it. With WW super X HP's, it shoots ragged 1 hole groups at 50 yds. Great rifle. It has accounted for several dozen fox squirrels here in the hardwoods.

They only have one action screw, in the front of the trigger guard. Have read the trick is to install another action screw at the rear of the trigger guard as well as free float the barrel and bed it about 2" up the barrel. Kind of mixed about doing this to mine, as it is in excellent condition and these things are getting in to the collector realm now. Mine is not free floated, a dollar will not pass far. From the pictures in the thread it looks like the early ones had ebony and the later ones rosewood tips? I have rosewood, I think 1980 model by the codes.

You are correct, they do seem to shoot better with a second screw added to the rear of the receiver - based on reports I've seen over at rimfire.com.

I did glass bed the receiver in mine and under the first 2" of the barrel, free floating the rest, but I did not add a second screw.

The advantage of doing this is that it doesn't change the external appearance at all.

It shoots a bit more consistently this way, but as noted it's still not in the same accuracy class as my CZ's and Model 52s.

To be honest I think the barrel is the limiting factor. Mine is not as accurate as some, but I suspect I just have one at the not quite as accurate end of the normal distribution curve - and even at that it's still pretty accurate for a .22 Sporter.

I have a CZ 452 Silhouette in a Manners stock with a worked over trigger, the Remington is not as accurate but close. The Remington's trigger as stock is every bit as good. Decisions decisions..

Great photo! That's one of the main reasons I liked this rifle as a child. Even though I was only 12 or so at the time I recognized it as an adult/full size .22. Made me feel like I was handling a centerfire rifle.

__________________
BCCI Life Member #2068

During the late 90's and early 00's I competed in a local sporter .22 LR rifle league where we shot milk caps for dead center and also five round groups. First shot, cool barrel repeatability was key. My Remington 541T HB failed miserably, as it suffered from cold barrel syndrome. The first round fired from a cold barrel was always far outside a group or sight in. We fired one round every twenty minutes or so. The 541 printed all over the place. Another shooter had the same issue with her 541S. Apparently this is a known issue with some 541s. I switched to my Marlin 880SQ and had no such issues.

__________________
Virtue,Liberty & Independence

The 541-S will out shoot the 541 T all day long. By that I mean the S is uncanny accurate. Believe me, I know.

__________________
SSG Ret.
TN & TX ARNG 66-06

I caught mine out of the safe just in time to take this photo.

Attached Images

541S.jpg (88.2 KB, 59 views)

Beautiful. I'm gonna have to get me one of these. I don't think there is another American .22 rimfire that looks as sexy as this one.

__________________
BCCI Life Member #2068

I was really into the 541's. Have a 541S, 541T and 541X from DCM.
I haven't shot them since I purchased a CZ453 with the single set trigger.
I have a Weaver .22 scope mounted on the 453. I have it sighted in at 50 yards. The scope has the heavier base cross hair that tapers. I use the top of the V of the taper like a German post and shoot 1.5 inch steel at 100 yards. It works great.
The 50 yard zero is because this is my Ky squirrel rifle.

It’s been a minute since I started this thread but thought I’d update it. My father called me yesterday to let me know he was having the rifle shipped to my LGS. I’m looking forward to being reunited with the firearm but I also recognize how it must feel to dad as he starts to pass on his guns.

Once it arrives I’ll try and get my photobucket account straightened out and post some photos.

__________________
BCCI Life Member #2068

I've had a 541-S in the safe for about 30 years. Last shot it ~~25 years ago.
few handling dings, but otherwise pretty good. If Ican figure out a fair price for it, I'll sell it, because I need to downsize. I have m--ore 22s than i need--my Sako 78 does well for squirrels, and the Krico DST is good for everything else

__________________
de minimus non curat lex

Bought mine 25-30 years ago, paid $250 for it. Consider it my premier .22.
Only drawback the cheap plastic magazines.

Not a fan of the platform. Our club has three of the single shot target models. All have been out of action for years with sheared bolt stop pins. Every year or so I see if I can find that part. Never have. Local smith tried duplicating it and it was only moderately successful. I will admit the college club is hard on equipment, and the round count on these is way up there. But the design seems delicate to me.

I purchased a NIB 541S back in the late 80's or early 90's. It was stolen along with some other Remington Long Guns in a home burglary. The felon was caught but had thrown the guns into a creek where they were recovered to then set in an evidence locker for several months. After the sentencing the very rusty guns were returned to me. I restored them to functionality. The 541S, although no-longer pretty, shoots most brands of good 22 LR target grade ammo with acceptable accuracy for a sporter.

I have never owned one, but have shot one a great deal, best friend and hunting partner has had two over the past 40 years. They shoot great compared to other cheaper guns.
Those plastic mags are the weak spot. A guy in East Tennessee makes steel mags and my buddy has a couple for his gun. His name is John Reed and he is famous for his mags for these guns. You need to find his number by using rimfire central and order some mags. You will be pleased.
My choice is the 52 Win sporter reproductions by Mirokru, I have two and for me they are superior to the Rem 541 S,
Enjoy your gun, pick up a couple of metal mags from Tennessee and by a few bricks of SK ammo, these actions will put a smile on your face. 22LR in this category really shine if you feed them quality ammo, ammo is one item you get what you pay for in a 22. Consist .4 inch to .5 inch groups at 50 are usually available from these guns with quality ammo.

541 magazines will interchange with the Models 77 and 10C Nylon semiauto rifles (which are actually identical). For reasons unknown to me, 5-round magazines are difficult to find. I think someone makes metal magazines which are fairly pricey. I have a Remington 10C with a single 10 round plastic magazine I have experienced no problems with. But I would like to find one or two 5-rounders at a decent price. The ten round magazines are too ungainly. In fact, I keep the ten round magazine in a flannel pouch tied to the trigger guard when not in use.

for better magazines for Rem 541 /581 series rifles . like LittleCooner said , for metal magazines contact John Reed . at [email protected]
John Reed
1361 Warrior Path
Maryville ,TN 37803
..........for better new made plastic magazine .. made from one of those plastic printers ..contact Trekker Design and Manufacturing or
[email protected]
+1 (503) 547-9356.... all this on Remfire central forum. i have bought both

I have a 541S & find it to be very accurate. Of course the 2-7 Leopold doesn't hurt. It seems to be a bit more accurate than my 513T, but the 513 only has
receiver sight.

-don

__________________
SWCA LM#2190 SWHF#414

I have a 541-T with a sporter barrel made in 1987. Bought it new in 2019 for $425. Purchased 2 ten round mags. Started shooting the rimfire match at the club. Found out a lot about different ammo, but the big learn was about torque on the stock screws. Tried different torque settings front and rear. Fantastic difference in accuracy. Settled on 20 front and 19 rear. Long time friend who shoots an identical gun has entirely different torque settings. These Guys torque the stock screws on all Their rimfire rifles. They mostly shoot CZ. Weatherby, and Remington. Buy a quality torque screwdriver and start at 20 & 20 and go from there.

I had the heavy barreled version that I purchased new unfortunately the one I owned suffered pretty badly from a cold barrel first round flier. The first round would be 3 or more inches away from the rest of the group . The first several groups from the gun would be in the 3" range at 50 yds ...after warming up the groups would shrink considerably but once the gun was set aside for more than a few minutes the fliers would start all over again. I sent it back to Remington and then later had it professionally pillar bedded but could never cure of those fliers basically making the gun useless.
I now own the sporter version of the 541T that I purchased used about 12 yrs. ago for $350...excellent condition with original box/paperwork.
I did have to get it pillar bedded in order for it to shoot consistently but it does shoot pretty well and I really like the rifle . I find it a very comfortable fit with an excellent trigger .
They are out there but I've watched the prices slowly climb over the years typically ranging from about $600 -$ 1000 depending on the condition and wether or not it includes the box.