Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >


Reply
 
Thread Tools Display Modes
  #1  
Old 05-04-2017, 06:02 PM
opaul's Avatar
opaul opaul is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Nov 2011
Location: Central NC
Posts: 1,850
Likes: 4,744
Liked 2,630 Times in 728 Posts
Default Circular Saw Blade Knife

I used this old saw blade to make this knife. I used a 1" belt sander to shape the blade and a 4-1/2 inch disc grinder to cut the shape from the circular saw. The second knife is an old Rigid knife blank I had in a kit form from the early 70's. I made the leather sheath for this one. I would also like to advance this skill as well. Since I retired this is something I might pursue.
Anyone else have home made knives to show? I hope to get past the primitive stage soon and start turning out some nice ones!
Thanks for looking
Attached Thumbnails
Circular Saw Blade Knife-circular-saw-knife-blank-material-jpg   Circular Saw Blade Knife-flicker-2-jpg   Circular Saw Blade Knife-knife-jpg  
__________________
T&P 2016-2024 and Beyond!!

Last edited by opaul; 05-04-2017 at 08:05 PM.
Reply With Quote
  #2  
Old 05-04-2017, 06:14 PM
Lee Barner's Avatar
Lee Barner Lee Barner is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Feb 2005
Location: NW Tennessee
Posts: 2,341
Likes: 10,727
Liked 4,832 Times in 963 Posts
Default

what did you use to cut that blank out of the saw blade? I like it. keep them coming. lee
Reply With Quote
The Following 4 Users Like Post:
  #3  
Old 05-04-2017, 06:51 PM
Gripgrabber's Avatar
Gripgrabber Gripgrabber is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Oct 2014
Location: Brooksville, FL
Posts: 322
Likes: 223
Liked 352 Times in 136 Posts
Default

Great job! Nothing better than making something yourself
SEMPER PARATUS
__________________
NRA Life Member
CPO
Reply With Quote
The Following 5 Users Like Post:
  #4  
Old 05-04-2017, 07:08 PM
Iggy's Avatar
Iggy Iggy is online now
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Oct 2003
Location: Wyoming
Posts: 8,924
Likes: 3,882
Liked 15,854 Times in 3,471 Posts
Default

My Dad had one made out of a power hacksaw blade used to cut railroad rails. That sucker was sharp and seldom needed any touch up.

Whoever made it, left the saw blade on the back of the blade. My Dad used it to saw thru the spine and other bones while quartering elk and moose to put on pack horses.

I don't know whatever became of that knife. He gave it to someone while I was gone.
__________________
Eccentric old coot.
Reply With Quote
The Following 8 Users Like Post:
  #5  
Old 05-04-2017, 07:36 PM
opaul's Avatar
opaul opaul is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Nov 2011
Location: Central NC
Posts: 1,850
Likes: 4,744
Liked 2,630 Times in 728 Posts
Default

Quote:
Originally Posted by Lee Barner View Post
what did you use to cut that blank out of the saw blade? I like it. keep them coming. lee
Thanks!
I used a 4-1/2" metal cut off disc on my angle grinder.
__________________
T&P 2016-2024 and Beyond!!
Reply With Quote
The Following 3 Users Like Post:
  #6  
Old 05-04-2017, 07:40 PM
les.b's Avatar
les.b les.b is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: May 2015
Location: West Virginia
Posts: 2,618
Likes: 30,373
Liked 7,274 Times in 2,022 Posts
Default

Well, I don't know much about knives, but that looks great! Have fun!!

Best Regards, Les
__________________
SWCA 3084, SWHF 495, PGCA 3064
Reply With Quote
The Following 2 Users Like Post:
  #7  
Old 05-04-2017, 07:45 PM
SPEEDGUNNER's Avatar
SPEEDGUNNER SPEEDGUNNER is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: May 2007
Location: Between the Brandywines
Posts: 1,525
Likes: 267
Liked 979 Times in 395 Posts
Default

Well done. I am sure it is not as easy as your pictures make it look, there is probably a lot of time spent between cutting out the blank and the finished product. If you ever decide to go retail I would be a buyer, something like either shown would be cool to own.
Reply With Quote
The Following 2 Users Like Post:
  #8  
Old 05-04-2017, 08:02 PM
garddogg56's Avatar
garddogg56 garddogg56 is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Dec 2015
Location: Maine
Posts: 402
Likes: 646
Liked 384 Times in 178 Posts
Default

Good looking knife..
Reply With Quote
The Following 2 Users Like Post:
  #9  
Old 05-05-2017, 01:09 PM
ky wonder ky wonder is offline
US Veteran
Circular Saw Blade Knife  
Join Date: Oct 2006
Location: horse cave, ky
Posts: 642
Likes: 214
Liked 1,080 Times in 320 Posts
Default

somewhere around here there is a knife that I made from an old cross cut saw blade, and I used a old antler base for the handle, it was not as nice looking as yours, and I gave up on making knifes after that attempt
Reply With Quote
The Following 2 Users Like Post:
  #10  
Old 05-05-2017, 04:56 PM
vonn's Avatar
vonn vonn is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Sep 2011
Location: houston,texas
Posts: 4,632
Likes: 70,904
Liked 16,299 Times in 3,671 Posts
Default

Nice looking work!
__________________
Hue 68 noli me tangere
Reply With Quote
The Following User Likes This Post:
  #11  
Old 05-06-2017, 01:03 AM
Drm50 Drm50 is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Oct 2014
Location: Monroe cnty. Ohio
Posts: 2,177
Likes: 1,545
Liked 3,111 Times in 1,060 Posts
Default

When I was still in school I got a job in the machine shop of a
small manufacture, clean up man. There was a old machinist
that taught me to make knives out of power hack saw blades.
This was in 60s and most power hacksaw blades were only
tempered on the teeth. This is the section that would hold a
edge. When your blade left parallel with teeth you would lose
the benifit of the tempered edge. He had two tests he preformed
on any stray metal I drug in for blade making. See how well it
held a magnet and he would put it on grinder to "read" the spark.
Cutting blanks from a circular saw blade is kind of iffy too, most
aren't tool steel, and if you heat them up with a cutting tool you
can ruin any temper they have. If you can't temper the steel you
are wasting your time. The last knife I made used a industrial
chipper blade, already a piece of tempered steel that held a fine
edge.
Attached Thumbnails
Circular Saw Blade Knife-image-jpg  
Reply With Quote
The Following 5 Users Like Post:
  #12  
Old 05-06-2017, 06:23 AM
Richard Simmons Richard Simmons is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Jun 2003
Location: Virginia
Posts: 1,080
Likes: 1,672
Liked 1,418 Times in 372 Posts
Thumbs up

Quote:
Originally Posted by opaul View Post
I used this old saw blade to make this knife. I used a 1" belt sander to shape the blade and a 4-1/2 inch disc grinder to cut the shape from the circular saw. The second knife is an old Rigid knife blank I had in a kit form from the early 70's. I made the leather sheath for this one. I would also like to advance this skill as well. Since I retired this is something I might pursue.
Anyone else have home made knives to show? I hope to get past the primitive stage soon and start turning out some nice ones!
Thanks for looking
I like the design of your knife, particularly the profile of the blade. How did you heat treat it?
__________________
BCCI Life Member #2068
Reply With Quote
The Following 2 Users Like Post:
  #13  
Old 05-18-2017, 06:04 PM
opaul's Avatar
opaul opaul is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Nov 2011
Location: Central NC
Posts: 1,850
Likes: 4,744
Liked 2,630 Times in 728 Posts
Default

Quote:
Originally Posted by Richard Simmons View Post
I like the design of your knife, particularly the profile of the blade. How did you heat treat it?
Sorry for the delay. I did not heat treat it. Reason being, and I'm sure there are many different opinions, that when I ran the edge of a file over the steel it skated across. I was also careful not to overheat the steel when I cut out the shape.
It takes and holds an edge well. I just made the bottom one in the photo out of the same saw blade.
But I am in the process of getting a propane forge and study up on metallurgy
Added second picture with the leather sheath I made for the smaller knife.
Attached Thumbnails
Circular Saw Blade Knife-last-two-knives-may-16-jpg   Circular Saw Blade Knife-going-away-knife-gift-alec-jpg  
__________________
T&P 2016-2024 and Beyond!!

Last edited by opaul; 05-18-2017 at 06:13 PM.
Reply With Quote
The Following 5 Users Like Post:
  #14  
Old 05-18-2017, 09:23 PM
6518John's Avatar
6518John 6518John is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: May 2014
Location: AR--Town & Country
Posts: 1,916
Likes: 26,831
Liked 4,283 Times in 1,251 Posts
Default

OPaul--have you seen the TV show "Forged in Fire?" You would love it. I saw for the first time this week and enjoyed it immensely.

Forged in Fire (TV Series 2015– ) - IMDb
__________________
No school like the old school.
Reply With Quote
The Following 2 Users Like Post:
  #15  
Old 05-18-2017, 09:46 PM
lebomm lebomm is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Dec 2008
Location: Seattle
Posts: 1,669
Likes: 34
Liked 579 Times in 347 Posts
Default

Really likin' the little one ! Congratulations !

Larry
Reply With Quote
The Following 3 Users Like Post:
  #16  
Old 05-19-2017, 02:07 AM
k22fan k22fan is online now
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Feb 2010
Posts: 3,943
Likes: 2,650
Liked 2,605 Times in 1,295 Posts
Default

During the early 1970s I made a knife out of a broken power hack saw blade that my high school metal shop teacher provided. He said there were two types. Some only had the teeth edge hardened with electricity but the blade he gave he was hardened throughout. I only had to careful to not over heat it and after it was finished to never loan it. Steel that hard used by a fool as a pry bar will snap.

I made an aluminum hand guard and spacers out of scrap and drilled holes through a piece of purple heart wood to slip over the tang. I assembled it with epoxy and a cross bolt through the hack saw blade's mounting hole. It looks amateur but not to shabby for a 16 year old.

If I had it to do over I'd leave the teeth on the back dulled for scaling fish, make it shorter and not give it a clip point. It was more than enough work without making a pommel or butt cap.
Reply With Quote
The Following 3 Users Like Post:
  #17  
Old 05-19-2017, 07:27 AM
OLDSTER's Avatar
OLDSTER OLDSTER is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Dec 2016
Location: North Dakota
Posts: 794
Likes: 1,634
Liked 979 Times in 311 Posts
Default home made knives

Now I REALLY have the itch! Those all look great, and what a great project. I'm gonna try it for sure. Thanks for posting
__________________
SWCA 2952
John
Reply With Quote
The Following 3 Users Like Post:
  #18  
Old 05-19-2017, 09:01 AM
SOTVEN SOTVEN is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Apr 2017
Posts: 77
Likes: 147
Liked 35 Times in 24 Posts
Default

I HAVE ONLY INSTALLED AN ANTLER HANDLE TO A BUCK 119...... NOTHING NEAR TO WHAT YOU DID FRIEND. REALLY NICE WORK YOU HAVE DONE!
Reply With Quote
The Following 2 Users Like Post:
  #19  
Old 05-19-2017, 10:26 AM
steelslaver's Avatar
steelslaver steelslaver is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Oct 2013
Location: Central Montana
Posts: 3,257
Likes: 1,026
Liked 5,362 Times in 1,836 Posts
Default

I make knives. If you use circle saw blades that are NOT carbide tipped you are probably fine, if you do not get it overr about 450f while cutting and grinding. Higher than that your going to be removing some of the hardness.

Large older saw blades where usually L6 or 15n20, both good steels. Newer smaller blades are suspect and "mystery steel" You can tell some about the alloy of steel by the sparks it sends off while grinding.

The power hack saw blades mentioned are a whole different ball game. Usually something like M4, which is a carbon and tungsten rich steel. When heat treated it forms small tungsten carbides in the steel matrix. This makes it very wear resistant and it takes much higher heat to cause it to loose its temper. It is often used for lathe and mill tooling.(as opposed tto purer carbide tooling). It is very difficult to grind (wear resistant) when compared to many tool steels. It also has a very abrupt elastic limit. In thin sections like power hacksaw blades it will flex some, but, then abruptly snap similar to D2 which forms vanadium carbides as apposed to tungsten carbides. Most good files are 1095 or W2 which are mainly just plain high carbon steels. Good springs and many farm implement tooling like disks and non hard faced harrow teeth are 5160. All of which can make good knives if heat treated properly. Found steel can be fun and good practice material.

But, many found steels are mystery steels. It can be fun to mess with them and experiment. But, really the piece of steel is cheap when you start looking at things like grinder belts, good burl wood for handles corby fasteners. Then there is the time spend grinding, hand sanding, heat treating and fitting it all together. Even if I pay $20 or more for a quality piece of known steel to me it is cheap in the long run. On knives for sale I only use known steels. That is because every steel has a best heat treat method to achieve the best results. A common saying among many knife makers is "if the Lord himself send down the perfect steel it would be nothing without the proper heat treat."

I have watched Forged in Fire. On common high carbon steels an experienced smith can do a very good job of hardening by eyeballing the color of the steel before quench. But, that show never shows a temper cycle. A proper temper cycle takes time for the best result. Untempered high carbon steel is very brittle. It would never survive a chopping test. Just dropping it could cause a hardened untempered piece to shatter.
Reply With Quote
The Following 8 Users Like Post:
  #20  
Old 05-19-2017, 10:54 AM
Drm50 Drm50 is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Oct 2014
Location: Monroe cnty. Ohio
Posts: 2,177
Likes: 1,545
Liked 3,111 Times in 1,060 Posts
Default

I have seen guys put a lot of time in on making a knife out of
unknown steels. What they usually end up with is a very classy
butter knife. I recently bought some old tool steel blanks.
2"x16" in different thicknesses. The brand is Simmons and each
piece is individually wrapped. There is heat treating information
on the labels. It is given by the color of the steel under heat. In
present state it can be filed. I'm guessing this stuff came from
the 1950s, blanks have fine rust on them but no pitting. I'm
going to make a blade out of this and take it to a shop that has
controlled tempering to have it done.
Reply With Quote
The Following User Likes This Post:
  #21  
Old 05-19-2017, 10:55 AM
opaul's Avatar
opaul opaul is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Nov 2011
Location: Central NC
Posts: 1,850
Likes: 4,744
Liked 2,630 Times in 728 Posts
Default

Quote:
Originally Posted by steelslaver View Post
I make knives. If you use circle saw blades that are NOT carbide tipped you are probably fine, if you do not get it overr about 450f while cutting and grinding. Higher than that your going to be removing some of the hardness.

Large older saw blades where usually L6 or 15n20, both good steels. Newer smaller blades are suspect and "mystery steel" You can tell some about the alloy of steel by the sparks it sends off while grinding.

The power hack saw blades mentioned are a whole different ball game. Usually something like M4, which is a carbon and tungsten rich steel. When heat treated it forms small tungsten carbides in the steel matrix. This makes it very wear resistant and it takes much higher heat to cause it to loose its temper. It is often used for lathe and mill tooling.(as opposed tto purer carbide tooling). It is very difficult to grind (wear resistant) when compared to many tool steels. It also has a very abrupt elastic limit. In thin sections like power hacksaw blades it will flex some, but, then abruptly snap similar to D2 which forms vanadium carbides as apposed to tungsten carbides. Most good files are 1095 or W2 which are mainly just plain high carbon steels. Good springs and many farm implement tooling like disks and non hard faced harrow teeth are 5160. All of which can make good knives if heat treated properly. Found steel can be fun and good practice material.

But, many found steels are mystery steels. It can be fun to mess with them and experiment. But, really the piece of steel is cheap when you start looking at things like grinder belts, good burl wood for handles corby fasteners. Then there is the time spend grinding, hand sanding, heat treating and fitting it all together. Even if I pay $20 or more for a quality piece of known steel to me it is cheap in the long run. On knives for sale I only use known steels. That is because every steel has a best heat treat method to achieve the best results. A common saying among many knife makers is "if the Lord himself send down the perfect steel it would be nothing without the proper heat treat."

I have watched Forged in Fire. On common high carbon steels an experienced smith can do a very good job of hardening by eyeballing the color of the steel before quench. But, that show never shows a temper cycle. A proper temper cycle takes time for the best result. Untempered high carbon steel is very brittle. It would never survive a chopping test. Just dropping it could cause a hardened untempered piece to shatter.
Thank you steelslaver! Lot of good info there!

I should have my propane forge available soon. I do plan on using 1080 steel initially and move up to stainless when I learn more about the process. I think the availability of outsourcing the heat treating process is also a possibility.
I'm also fortunate enough to have access to some old (maybe very old) farm plow implements that should make nice building steel.

I've also wondered about the tempering process on forged in fire. I don't think they show that segment of the show, since it takes additional hours. I have also seen a few of the blades get dropped and broken just as you described, obviously before being tempered.
__________________
T&P 2016-2024 and Beyond!!

Last edited by opaul; 05-19-2017 at 10:59 AM.
Reply With Quote
The Following 2 Users Like Post:
  #22  
Old 05-19-2017, 12:37 PM
steelslaver's Avatar
steelslaver steelslaver is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Oct 2013
Location: Central Montana
Posts: 3,257
Likes: 1,026
Liked 5,362 Times in 1,836 Posts
Default

Harden of simple steels is possible with a forge. Most simple steels reach their critical temperature around 1500f. Big clue is a magnet will not stick to them after about 1450. A few shade lighter red and your there. Guys who do good HT this way use a low light in the forge area to recognize the right color consistently. If you polish hardened steel and heat you can recognize the lower temps by color. Straw is around 400. But, this does not give the best temperature as a good temper needs time for the structure of the hardened steel to fully temper. 2 2 hr cycles at 400-450 is best. If you want a very hard edge that will never be banged on hard material 400, if it will be abused 450. The harder it is the more prone to edge chipping the softer it is less likely to chip, but starts to get edge roll over if to soft. But a kitchen oven or a good well regulated toaster oven does a good job of this. High carbon steel hardened in an oven or forge will have a very thin layer of steel on the outside that has lost some carbon. This needs sanded off. Sometimes people file a piece after its hardened and the file bites a bit. This doesn't always mean the steel is soft. Just a bit on the outside is decarbonized. A few thousands in it can be fully hardened.

Stainless steels are very poor candidates for hardening in a forge. It can be done, but never real well. The high amounts of chrome make itt more difficult for the carbon to get in full saturation. Most stainless steels call for a temperature of around 1850f or more and about a 30 min soak time at that temperature. Very difficult to hold a consistent 1850 with a forge for that long. Plus at that temperature the steel will lose a bunch of carbon on the outer areas very quickly. I HT stainless steels in a envelope formed from 309 stainless foil. This keeps the oxygen away from the steel so it does not burn of any carbon.

Last edited by steelslaver; 05-19-2017 at 12:44 PM.
Reply With Quote
The Following 3 Users Like Post:
  #23  
Old 05-20-2017, 01:01 AM
Dennis Dennis is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Apr 2005
Posts: 449
Likes: 2,634
Liked 319 Times in 183 Posts
Default

Nice job, OPaul.
Classic blade shapes for skinning and caping.
Well done!
Reply With Quote
The Following 2 Users Like Post:
  #24  
Old Yesterday, 07:51 PM
old bear's Avatar
old bear old bear is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Mar 2010
Location: R.T.P., Nc
Posts: 6,499
Likes: 13,562
Liked 10,654 Times in 3,139 Posts
Default

Paul, great looking knives. When you get up and running, please, let me know. I'd love to be an early customer.
__________________
Always Stay Strong!
Reply With Quote
The Following 2 Users Like Post:
  #25  
Old Yesterday, 09:11 PM
les.b's Avatar
les.b les.b is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: May 2015
Location: West Virginia
Posts: 2,618
Likes: 30,373
Liked 7,274 Times in 2,022 Posts
Default

Opaul:

Those are some very nice knives that you have built there. I hope that you will continue to grow in your hobby/avocation.

I don't know if you are aware, but steelslaver is being modest, and probably doesn't want to derail your thread. He is very well known on the knife forums, and has produced some very stunning, functional and highly regarded custom knives. I shouldn't out his real name here, but he uses it on his knives. (steelslaver, if you're reading this, don't blush!).

I would regard any advice that he has tendered as gospel.

Best Regards, and hope that you find great sucess in your new endeavor!!

Les
__________________
SWCA 3084, SWHF 495, PGCA 3064
Reply With Quote
The Following 4 Users Like Post:
  #26  
Old Today, 07:54 AM
opaul's Avatar
opaul opaul is offline
US Veteran
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Nov 2011
Location: Central NC
Posts: 1,850
Likes: 4,744
Liked 2,630 Times in 728 Posts
Default

Quote:
Originally Posted by les.b View Post
Opaul:

Those are some very nice knives that you have built there. I hope that you will continue to grow in your hobby/avocation.

I don't know if you are aware, but steelslaver is being modest, and probably doesn't want to derail your thread. He is very well known on the knife forums, and has produced some very stunning, functional and highly regarded custom knives. I shouldn't out his real name here, but he uses it on his knives. (steelslaver, if you're reading this, don't blush!).

I would regard any advice that he has tendered as gospel.

Best Regards, and hope that you find great sucess in your new endeavor!!

Les
Thanks Les. This hobby is fitting in nicely with my recent retirement!
I agree, steelslaver has great advise and his knowledge is very evident in his replies which are honest and straight up, which I respect.

Hopefully this grinder will gets lots of use as I ramp up my experience and learning curve. Forge is on it's way!
Attached Thumbnails
Circular Saw Blade Knife-kmg-grinder-jpg  
__________________
T&P 2016-2024 and Beyond!!

Last edited by opaul; Today at 07:57 AM.
Reply With Quote
The Following User Likes This Post:
  #27  
Old Today, 09:45 AM
Drm50 Drm50 is offline
Member
Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife Circular Saw Blade Knife  
Join Date: Oct 2014
Location: Monroe cnty. Ohio
Posts: 2,177
Likes: 1,545
Liked 3,111 Times in 1,060 Posts
Default

The making of a correctly tempered blade is the key to knife
making. Guys that know how to do this are artist in their own
right. I have made a lot of knives but have mostly failed in
tempering process. Which I attempted while making knives out
of files. I take the easy way out and look for items of carbon
steel that are already tempered. Actually this is about the same
as making a "kit" knife. Believe me there are a lot more Handle
artists than blade smiths.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Made a knife from a saw blade Smith357 Firearms & Knives - Other Brands 13 03-19-2016 05:23 AM
EK Knife unmarked blade Papaw Firearms & Knives - Other Brands 6 04-28-2015 05:51 PM
Hunting Knife Blade Styles skeezix Firearms & Knives - Other Brands 29 12-05-2014 12:50 AM
F/S S&W Vintage Catalogs, All Model Circular 1950, 22 OD intro circular and More Dan M Accessories/Misc - For Sale or Trade 4 06-10-2011 10:56 AM
WTB: S&W Swing Blade Boot Knife 4864 WANTED to Buy 0 11-22-2009 07:02 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 03:10 PM.


S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)