Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >


Reply
 
Thread Tools Display Modes
  #1  
Old 04-09-2018, 05:50 PM
DWalt's Avatar
DWalt DWalt is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: South Texas
Posts: 21,575
Likes: 2
Liked 12,363 Times in 6,973 Posts
Default Remington 550-1 - Am I happy!

My very first .22 rifle was a Remington 550-1 which I got for a Christmas present in about 1956. I put a huge number of .22 Shorts through it in my younger days. Back then, .22 Shorts were considerably cheaper than .22 LRs so that's what I used. As time passed, I quit shooting a .22, and the 550 just gathered dust. For reasons I don't remember, I sold it in about 1992 for $100, but eventually regretted it. For the last year or so, I have been on the lookout for another 550 as I have rediscovered the joys of shooting .22 rifles and handguns as the ammunition prices have dropped back to an affordable range. But every 550 I have seen has been in well-used condition and/or the price was more than I thought was reasonable.

Until yesterday. At the local gun show, I found a 550-1 in near-new condition with a $300 price tag. I offered $250 and the seller accepted. It has a few minor wood finish scratches, but a cleaning with solvent and a fresh coat of stock oil will take care of that in short order. The barrel date stamp says it was made in January 1956, about the same time as the one I originally had. I fired a few dozen rounds of both shorts (standard velocity, no less) and LRs onto the ground in my back yard, and functioning was perfect. The standard velocity shorts are nearly silent.

My feeling has always been that there has never been a better .22 semiautomatic rifle made than the 550. Not only will it shoot shorts, longs, and long rifle cartridges interchangeably (try doing that with any other semiautomatic .22 rifle), it is extremely good when it comes to accuracy. I remember that my first rifle had no problem in producing 1" 50 yard groups. It is an old-school gun made with real walnut and steel and the highest quality workmanship, made for heavy use by adults, not kids, and its reliability is perfect. Or at least my original rifle was.

I won't be able to shoot it for the next two weeks, but I plan to burn through several hundred rounds as soon as I can. I can hardly wait. Am I happy to have an old friend back in the stable.
Reply With Quote
  #2  
Old 04-09-2018, 06:25 PM
4barrel's Avatar
4barrel 4barrel is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jan 2012
Location: OVER the hill in TEJAS
Posts: 1,516
Likes: 8,205
Liked 2,259 Times in 936 Posts
Default

I still have mine with the deflector I bought used in the 70s in about 85% or better without scope grooves.

Last edited by 4barrel; 04-09-2018 at 07:43 PM.
Reply With Quote
  #3  
Old 04-09-2018, 06:26 PM
ralph7's Avatar
ralph7 ralph7 is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jul 2010
Location: Houston, Texas
Posts: 3,115
Likes: 5,352
Liked 3,581 Times in 1,349 Posts
Default

Hopefully yours had the unique powder gas deflector they originally came with. That is the most frequent MIA part these guns have,
I have a 550-2 Gallery Special, think all the 550 series are a neat breed of .22 auto rifle.
Reply With Quote
  #4  
Old 04-09-2018, 06:38 PM
ExRanger714's Avatar
ExRanger714 ExRanger714 is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Feb 2014
Location: Smoky Mountains, West NC
Posts: 132
Likes: 59
Liked 166 Times in 68 Posts
Default

I love mine but I broke off the follower tip of the inner mag tube. Hard to find and expensive to replace. Be careful with yours and enjoy!

Regards JD
__________________
"On the whistle fire 6 rounds"
Reply With Quote
  #5  
Old 04-09-2018, 07:16 PM
DWalt's Avatar
DWalt DWalt is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: South Texas
Posts: 21,575
Likes: 2
Liked 12,363 Times in 6,973 Posts
Default

Yes, mine has the deflector, as did my first 550. I have seen others for sale with the deflector missing, and in fact I recently saw another 550-1 in reasonably good condition but without the deflector for $230, which I passed up for just that reason. I am not sure how difficult a replacement deflector is to find. I believe the earlier 550s did not come equipped with deflectors. I have understood that prior to about 1955, the 550 receivers did not have the grooves for tip-off mounts. I had a fairly decent 4X scope on my previous 550, and I am going to get on eBay to find a pair of 1" mounts with the tip-off claws. I have an old but fairly decent Weaver 2-3/4X scope that I plan to use with my "new" 550.

With Remington (maybe?) going out of the gun business, I don't think one can lose money buying any good condition Remington gun at the right price. While I have several earlier Winchester rifles and shotguns, I have always been partial to Remingtons, especially their semiautomatics.
Reply With Quote
The Following User Likes This Post:
  #6  
Old 04-09-2018, 07:29 PM
Rayfan87's Avatar
Rayfan87 Rayfan87 is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jun 2017
Posts: 39
Likes: 3
Liked 51 Times in 15 Posts
Default

An older gentleman who I considered a grandfather had two .22 rifles on the wall of his garage, I always looked at them when we were there. One night out in the garage he told me to "grab that top rifle for me," I was 25 at the time 6' tall, he was 5'4" on a good day. Being the good kid I pretended to be, I quickly retrieved the rifle and started to hand it to him. He waved his hand and said "go put it in your car, it's yours now, you can have the other one later, but I still need it." It was a beautifully well taken care of 550-1 that I absolutely treasure. I know it's not a high dollar weapon, but because it was his, I'd never sell it.
Reply With Quote
  #7  
Old 04-10-2018, 01:26 AM
Big E3's Avatar
Big E3 Big E3 is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Nov 2013
Location: Colorado
Posts: 219
Likes: 118
Liked 316 Times in 116 Posts
Default

Pictures guys, come on now. I donít have a good pic of just my 1957 made 550-1, so hereís a few of the Remington family. I think I just recently posted these in a different thread but, canít have too many pics. The top down: 341 that my dad received from his dad when he returned from WWII, two 34ís and finally the 550-1 that I picked up 8 years ago from a garage sale for $100. Really interesting guns with the floating chamber to handle short to long rifle without any adjustment. Now Dwalt we need to see yours.
Attached Thumbnails
Remington 550-1 - Am I happy!-rem-341-34-34-550-1-jpg  
Reply With Quote
The Following 4 Users Like Post:
  #8  
Old 04-10-2018, 09:23 AM
Stranglehold's Avatar
Stranglehold Stranglehold is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Mar 2007
Location: Michigan
Posts: 307
Likes: 3
Liked 674 Times in 100 Posts
Default

Nice find...and I agree with all you've said. A man sized rifle built the way a firearm should be made. I've accumulated quite a few of the vintage rimfire autoloaders, including a pair of 550-1s.





Roe
Reply With Quote
The Following 7 Users Like Post:
  #9  
Old 04-10-2018, 12:46 PM
DWalt's Avatar
DWalt DWalt is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: South Texas
Posts: 21,575
Likes: 2
Liked 12,363 Times in 6,973 Posts
Default

I'll put up a picture after I put a coat of oil on the stock to cover the scratches. But it is exactly the same as the others shown above. Except my stock is a very dark walnut without much of its grain showing. Fresh oil may bring out a little more grain.
Reply With Quote
  #10  
Old 04-10-2018, 04:10 PM
grice grice is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jan 2018
Location: San Diego county
Posts: 43
Likes: 7
Liked 20 Times in 12 Posts
Default

When I was 13 my dad bought me a 550-1, that’s been a while, 1962 or so lol. Anyway that was one fine rifle that was accurate as all get out. I never had to adjust the rear sight. I dearly loved that rifle then one day right after my wife and I moved we came home and someone had broke in to the house and stole nearly every gun I had and only missed my dads colt trooper and my model 29. It broke my heart. That was 1980. It was stupid not to have a safe and I hate to admit it. Anyway couple years ago I saw this Remington 550-1 on gun broker and I paid $275 for it, first think I did was clean it with kerosene to get any dirt out of it then took it to the range, shoots just like my old one and doesn’t skip s beat. Best 22 rifles ever made, my opinion . Glad you found one for yourself.
Reply With Quote
  #11  
Old 04-10-2018, 04:42 PM
gmiller0737 gmiller0737 is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Nov 2010
Location: Jacksonville,Florida
Posts: 678
Likes: 564
Liked 313 Times in 184 Posts
Default

Quote:
Originally Posted by grice View Post
When I was 13 my dad bought me a 550-1, thatís been a while, 1962 or so lol. Anyway that was one fine rifle that was accurate as all get out. I never had to adjust the rear sight. I dearly loved that rifle then one day right after my wife and I moved we came home and someone had broke in to the house and stole nearly every gun I had and only missed my dads colt trooper and my model 29. It broke my heart. That was 1980. It was stupid not to have a safe and I hate to admit it. Anyway couple years ago I saw this Remington 550-1 on gun broker and I paid $275 for it, first think I did was clean it with kerosene to get any dirt out of it then took it to the range, shoots just like my old one and doesnít skip s beat. Best 22 rifles ever made, my opinion . Glad you found one for yourself.


I have one too it was the 1st Real Gun I ever fired it belonged to My Dad,I still shoot it from time to time Mine was made in 1950


Sent from my iPhone using Tapatalk
Reply With Quote
  #12  
Old 04-11-2018, 09:30 AM
Rayfan87's Avatar
Rayfan87 Rayfan87 is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jun 2017
Posts: 39
Likes: 3
Liked 51 Times in 15 Posts
Default

Had to snap a new pic of mine. The scope is nothing special, just a cheap one I picked up. Barrel code puts it at September of '55.
Attached Thumbnails
Remington 550-1 - Am I happy!-2018-04-10-17-59-53-1-jpg  
Reply With Quote
The Following 3 Users Like Post:
  #13  
Old 04-12-2018, 09:16 AM
-db-'s Avatar
-db- -db- is offline
US Veteran
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: MI
Posts: 4,245
Likes: 11,827
Liked 4,470 Times in 1,512 Posts
Default

1953 Model

__________________
SWCA #2842
SWHF #448
Reply With Quote
The Following 7 Users Like Post:
  #14  
Old 04-12-2018, 09:28 AM
Rayfan87's Avatar
Rayfan87 Rayfan87 is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jun 2017
Posts: 39
Likes: 3
Liked 51 Times in 15 Posts
Default

Numrich sells reproduction deflectors if you can't find originals.
Reply With Quote
  #15  
Old 04-12-2018, 01:20 PM
kld555 kld555 is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jul 2017
Location: Arkansas
Posts: 2
Likes: 132
Liked 0 Times in 0 Posts
Default

I inherited my Dad's 550-1 made in 1946. Had he lived he would have been 109 today. "Happy Birthday, Dad." He bought it in the 1960's for $17.00 from some pawn shop in Indianapolis, In. as he had been to the State Legislature over some Union issue. He was a Business Agent for a Labor Union. It is behind the computer room door now in case some varmint does me harm. I treasure this rifle as well as a Winchester 24 in 16 gauge that he hunted with. I have a lot of good memories from him taking me hunting throughout the years. I miss him.
Reply With Quote
  #16  
Old 04-12-2018, 03:14 PM
DWalt's Avatar
DWalt DWalt is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: South Texas
Posts: 21,575
Likes: 2
Liked 12,363 Times in 6,973 Posts
Default

1946 would make it a very early 550-1. The earliest 550s used a bolt with two extractors. It seems that did nothing for reliability, so after WWII it was replaced by a bolt with a single extractor, and the Model 550 (or 550A) was changed to 550-1. From what I can determine, the shell and gas deflector and the grooved receiver top (for a telescopic sight mount) began with 1955 production. The story goes that the reason for the absence of deflectors seen on some later guns is that having the deflector in place makes it more difficult to remove a jammed fired case from the action, so the owner simply removed it. I don't know about that, as I don't remember having a case jam problem with my first 550-1. But I was always careful to clean my rifle after every use, especially the floating chamber (I normally used .22 shorts only). There is crud that can accumulate around the floating chamber and the barrel recess for it after extensive firing of .22 shorts. It's pretty simple to remove and clean the floating chamber as a part of routine cleaning.

BTW - I did order today a pair of 1" ring tip-off mounts (Weaver) off eBay - $10. There are quite a few listed if anyone is interested. I am going to mount a Weaver K4, or possibly an early 2-3/4X Weaver. But the K4 I have is in near-new condition, while the other scope shows more age and wear.

Last edited by DWalt; 04-13-2018 at 12:47 AM.
Reply With Quote
  #17  
Old 04-16-2018, 08:42 PM
DWalt's Avatar
DWalt DWalt is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: South Texas
Posts: 21,575
Likes: 2
Liked 12,363 Times in 6,973 Posts
Default

I applied a couple of coats of thinned oil to the stock which hid most of the scratches and added a Weaver K4 scope in Weaver tip-off mounts. I disassembled it completely and cleaned out all of the gunk inside, including what was around the floating chamber and gave everything a coating of Johnson's paste wax. As I said earlier, the walnut stock is very dark. It has some grain but it doesn't show well. As it was made in the days before serial numbers were required, I stamped an identification number of my own choosing in an inconspicuous place. It is a joy to behold. None like it will ever be made again.

Last edited by DWalt; 04-17-2018 at 10:16 PM.
Reply With Quote
The Following 3 Users Like Post:
  #18  
Old 04-16-2018, 09:52 PM
Rayfan87's Avatar
Rayfan87 Rayfan87 is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jun 2017
Posts: 39
Likes: 3
Liked 51 Times in 15 Posts
Default

Wouldn't the barrel code work in place of a sn?
Reply With Quote
  #19  
Old 04-16-2018, 10:07 PM
DWalt's Avatar
DWalt DWalt is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: South Texas
Posts: 21,575
Likes: 2
Liked 12,363 Times in 6,973 Posts
Default

Nothing unique about the barrel date code stamping by itself. In this one it is B c (January 1956). I suppose there were many 550s made in January 1956. Only one was made with that date code and my personal stamped code.

When I zero the scope, I'll give it a thorough test to see just how well it groups at 50 yards and maybe even at 100 yards.

Last edited by DWalt; 04-16-2018 at 10:17 PM.
Reply With Quote
  #20  
Old 04-17-2018, 06:45 AM
Rayfan87's Avatar
Rayfan87 Rayfan87 is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jun 2017
Posts: 39
Likes: 3
Liked 51 Times in 15 Posts
Default

There should be a number after those two letters. Mine is Db 39, making it the 39th barrel made in September of 55. While it may not be a true sn, it's as close as the factory supplied.
Reply With Quote
  #21  
Old 04-17-2018, 09:54 AM
DWalt's Avatar
DWalt DWalt is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: South Texas
Posts: 21,575
Likes: 2
Liked 12,363 Times in 6,973 Posts
Default

Quote:
Originally Posted by Rayfan87 View Post
There should be a number after those two letters. Mine is Db 39, making it the 39th barrel made in September of 55. While it may not be a true sn, it's as close as the factory supplied.
The following number on mine is 8. I have not seen anything stating that a number following the month and year ID letters is a sequential manufacture number. The usual references say that the number is a customer repair stamp, but I don't understand exactly what that means. I have seen two-letter date stamps with no following number, and also followed with one and two digit numbers. For a well-selling model, if it is a monthly sequential manufacture number it could easily go into three or even four digits, and I have never seen anything like that.

Last edited by DWalt; 04-17-2018 at 07:08 PM.
Reply With Quote
  #22  
Old 04-17-2018, 10:03 AM
VaTom VaTom is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jul 2016
Location: SW Virginia
Posts: 691
Likes: 2,280
Liked 1,236 Times in 375 Posts
Default

Quote:
Originally Posted by DWalt View Post
The following number on mine is 8. I have not seen anything identifying that a number following the month and year ID letters is a sequential manufacture number. The usual references say that the number is a customer repair stamp, but I don't understand exactly what that means. I have seen two-letter date stamps with no following number, and also followed with one and two digit numbers. For a well-selling model, if it is a monthly sequential manufacture number it could easily go into three or even four digits, and I have never seen anything like that.
Recently purchased a 1977 Remington 572. The barrel date code is on the left side of barrel of Remington rifles near the reciever. It will be alpha code with one or two letters for year and another letter for month. There are on-line sites that you can use to decipher the code. Keep in mind that the codes repeat every ten years so a later rifle of the same model could have the same code.

The older tube magazine .22's that shoot short, long or long rifle are great. You can put them in together. I have the 572 and a Marlin 39A. Lots of fun and very accurate.

Last edited by VaTom; 04-17-2018 at 10:05 AM.
Reply With Quote
  #23  
Old 04-17-2018, 10:21 AM
Tadeus67's Avatar
Tadeus67 Tadeus67 is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jul 2013
Location: Mexico
Posts: 226
Likes: 2,079
Liked 230 Times in 100 Posts
Default

I love mine! It is a great rifle, one I would never sell.
__________________
"lets be careful out there"
Reply With Quote
  #24  
Old 04-17-2018, 02:54 PM
DWalt's Avatar
DWalt DWalt is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: South Texas
Posts: 21,575
Likes: 2
Liked 12,363 Times in 6,973 Posts
Default

Quote:
Originally Posted by Tadeus67 View Post
I love mine! It is a great rifle, one I would never sell.
I have frequently heard from others that the Model 550 was very popular in Mexico. Can you comment on that?
Reply With Quote
  #25  
Old 04-17-2018, 04:08 PM
4barrel's Avatar
4barrel 4barrel is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jan 2012
Location: OVER the hill in TEJAS
Posts: 1,516
Likes: 8,205
Liked 2,259 Times in 936 Posts
Default

Quote:
Originally Posted by -db- View Post
1953 Model

Mine is a ZZ--W
Reply With Quote
  #26  
Old 04-17-2018, 07:53 PM
-db-'s Avatar
-db- -db- is offline
US Veteran
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: MI
Posts: 4,245
Likes: 11,827
Liked 4,470 Times in 1,512 Posts
Default

Mine, too, is ZZ.
__________________
SWCA #2842
SWHF #448
Reply With Quote
  #27  
Old 04-17-2018, 08:03 PM
Valmet's Avatar
Valmet Valmet is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jul 2012
Location: Richmond, Virginia
Posts: 1,072
Likes: 431
Liked 516 Times in 348 Posts
Default

They’re fantastic old rifles. I have my dads that was a bday gift when he was in 9th grade (1966 mfg), still has the range settings taped to the side of the stock in old type-writer font. Congrats!
__________________
Some Might Say.
Reply With Quote
  #28  
Old 04-17-2018, 08:11 PM
Rayfan87's Avatar
Rayfan87 Rayfan87 is offline
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Jun 2017
Posts: 39
Likes: 3
Liked 51 Times in 15 Posts
Default

ZZ w would be August of '53. On the Remington society's webpage it calls the number after the barrel code the assemby number, stampings before the letters are for repair work
Reply With Quote
  #29  
Old 04-17-2018, 10:10 PM
DWalt's Avatar
DWalt DWalt is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: South Texas
Posts: 21,575
Likes: 2
Liked 12,363 Times in 6,973 Posts
Default

Quote:
Originally Posted by Rayfan87 View Post
ZZ w would be August of '53. On the Remington society's webpage it calls the number after the barrel code the assemby number, stampings before the letters are for repair work
Maybe the assembler's number? That makes more sense. Yet I have seen some Remington date codes with no number.
Reply With Quote
  #30  
Old 04-18-2018, 03:30 PM
ClarkMag ClarkMag is offline
Member
 
Join Date: Nov 2007
Posts: 16
Likes: 0
Liked 2 Times in 2 Posts
Default

I have the 1950, 1951, and 1957 550-1 rifles.
The 1957 has tip off grooves.
I tell people this is the semi auto version of the bee hive Remingtons.
The half chamber allows them to reliably cycle CCI CB shorts that sound like a BB gun.
The older two have 4 pound springs are better for this than the newer one with a 5 pound spring.
Attached Thumbnails
Remington 550-1 - Am I happy!-remington-550-1-1957-2-24-2016-jpg   Remington 550-1 - Am I happy!-rem-550-reciever-plug-retainer-screw-2-15-2013-jpg   Remington 550-1 - Am I happy!-rem-550-reciever-plug-retainer-screw-drawing-2-15-2013-jpg  
Reply With Quote
The Following User Likes This Post:
  #31  
Old 04-19-2018, 07:46 PM
DWalt's Avatar
DWalt DWalt is online now
Member
Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy! Remington 550-1 - Am I happy!  
Join Date: Dec 2009
Location: South Texas
Posts: 21,575
Likes: 2
Liked 12,363 Times in 6,973 Posts
Default

Quote:
Originally Posted by ClarkMag View Post
I have the 1950, 1951, and 1957 550-1 rifles.
The 1957 has tip off grooves.
I tell people this is the semi auto version of the bee hive Remingtons.
The half chamber allows them to reliably cycle CCI CB shorts that sound like a BB gun.
The older two have 4 pound springs are better for this than the newer one with a 5 pound spring.
I test fired some standard velocity .22 Shorts in mine, but no CBs. Even the SV shorts are fairly quiet and function OK.

The floating chamber provides more impulse to the bolt when .22 Shorts are used. It really doesn't do anything when firing Longs or LRs as those function on blowback. During WWII there were full sized .22 MGs made up using the Williams floating chamber and used for training purposes. Probably not many of them were made as I have never seen one, just read about them.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Happy, Happy, Happy After the Auction. I Hope! woodentrout S&W Revolvers: 1961 to 1980 25 07-25-2015 03:16 PM
Happy Happy Happy! Completed my K Frame Masterpiece Trio. COYOTEHUNTER S&W Hand Ejectors: 1896 to 1961 50 03-17-2015 07:19 PM
Happy Birthday, Merry Christmas and Happy New Year!!! DeathGrip S&W Hand Ejectors: 1896 to 1961 7 12-28-2014 10:53 AM
Not happy with Remington UMC stevej615 Ammo 12 04-21-2012 01:12 AM
Smith&Wesson Straight Line!!! happy happy gjamison S&W Antiques 14 01-18-2012 08:29 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 09:11 PM.


© S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)