Smith & Wesson Forum

Go Back   Smith & Wesson Forum > General Topics > Firearms & Knives: Other Brands & General Gun Topics
o

Notices

Firearms & Knives: Other Brands & General Gun Topics Post Your General Gun Topics and Non-S&W Gun and Blade Topics Here


Reply
 
Thread Tools Display Modes
  #1  
Old 09-17-2018, 07:20 PM
H Richard's Avatar
H Richard H Richard is offline
US Veteran
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Aug 2006
Location: West Central IL
Posts: 22,758
Likes: 18,437
Liked 22,313 Times in 8,245 Posts
Default Sig P365

I had seen these little compact 9mm's a couple months ago, and found they were in short supply. I had my LGS put my name on the "want" list, and last Friday I got the call they got a few in. I took a look at it and decided I still liked it, just the right size and really fit my hand, 10 round mag with a 12 round available. I was thinking, 10 rounds trumps 6 rounds.

Picked up this morning and brought home for a good cleaning (lots of excess oil). It had been test fired for sure. Then took to the range and proceeded to put about 100 rounds through it. I ran Win White box, my Hornady 147 gr XTP loads, Bayou 147 gr coated, Bayou 124 gr coated, and my Precision Delta 124 gr JHP's. All were 100% functional, and from a 12 yard rest all shot and grouped close to the POA. The 147's shot just a maybe an inch low, the 115's and the 124's all shot to the same POI.

I think I'm going to like this little gun. It is no bigger than a J Frame and almost as small as my LCP2.

One of the targets from 12 yards, using different loads with each magazine. Target is the FBI Qual target.


__________________
H Richard
SWCA1967 SWHF244

Last edited by H Richard; 09-17-2018 at 07:21 PM.
Reply With Quote
The Following 7 Users Like Post:
  #2  
Old 09-17-2018, 07:54 PM
ShivasIrons's Avatar
ShivasIrons ShivasIrons is offline
SWCA Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Oct 2017
Location: NOVA
Posts: 579
Likes: 1,377
Liked 902 Times in 382 Posts
Default

I like mine. Shoots much bigger than it actually is. Love the sight picture.

I bought mine by accident. I heard the store owner calling people on a wait list. I was like waiting for what? He showed me. I bought one.
Reply With Quote
  #3  
Old 09-17-2018, 07:54 PM
CelticSire's Avatar
CelticSire CelticSire is offline
US Veteran
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Apr 2003
Location: Texas, USA
Posts: 1,112
Likes: 1,816
Liked 1,167 Times in 309 Posts
Default

I just bought one of these today myself. One of the Officers I work with is selling a bunch of handguns that belonged to the father of a friend of his. It's new in the box, including the Sig sticker. I paid the asking price of $375. I think I did okay.
Reply With Quote
The Following 3 Users Like Post:
  #4  
Old 09-17-2018, 08:09 PM
Florida J Frame Florida J Frame is offline
US Veteran
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Jun 2008
Posts: 1,051
Likes: 305
Liked 815 Times in 350 Posts
Default

Quote:
Originally Posted by H Richard View Post
I had seen these little compact 9mm's a couple months ago, and found they were in short supply. I had my LGS put my name on the "want" list, and last Friday I got the call they got a few in. I took a look at it and decided I still liked it, just the right size and really fit my hand, 10 round mag with a 12 round available. I was thinking, 10 rounds trumps 6 rounds.

Picked up this morning and brought home for a good cleaning (lots of excess oil). It had been test fired for sure. Then took to the range and proceeded to put about 100 rounds through it. I ran Win White box, my Hornady 147 gr XTP loads, Bayou 147 gr coated, Bayou 124 gr coated, and my Precision Delta 124 gr JHP's. All were 100% functional, and from a 12 yard rest all shot and grouped close to the POA. The 147's shot just a maybe an inch low, the 115's and the 124's all shot to the same POI.

I think I'm going to like this little gun. It is no bigger than a J Frame and almost as small as my LCP2.

One of the targets from 12 yards, using different loads with each magazine. Target is the FBI Qual target.


Did you examine the primers for drag marks?
Reply With Quote
  #5  
Old 09-17-2018, 08:33 PM
ColbyBruce ColbyBruce is offline
Member
 
Join Date: Nov 2007
Location: Atlanta, GA
Posts: 7,854
Likes: 3,767
Liked 11,624 Times in 3,642 Posts
Default

Is that your neighbor’s fence the target is hanging from?

I want one of those myself; however, I believe I will wait and shoot the one I will buy my son for a combo birthday/Christmas present.
Reply With Quote
  #6  
Old 09-17-2018, 09:56 PM
comiskeybum's Avatar
comiskeybum comiskeybum is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Jul 2015
Posts: 359
Likes: 12
Liked 277 Times in 139 Posts
Default

Love mine. Pocket carry into the office every single day.
__________________
Smith all the things
Reply With Quote
  #7  
Old 09-17-2018, 09:57 PM
Jeppo's Avatar
Jeppo Jeppo is offline
SWCA Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Feb 2017
Location: Davidson County, NC
Posts: 2,114
Likes: 7,780
Liked 4,123 Times in 1,411 Posts
Default

Quote:
Originally Posted by CelticSire View Post
I just bought one of these today myself. One of the Officers I work with is selling a bunch of handguns that belonged to the father of a friend of his. It's new in the box, including the Sig sticker. I paid the asking price of $375. I think I did okay.
I'll say!
Around here, the LEO price is $450 and I'm seeing them still at as much as $600...both plus tax.
Reply With Quote
The Following User Likes This Post:
  #8  
Old 09-17-2018, 10:14 PM
moralem moralem is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Dec 2009
Posts: 2,451
Likes: 240
Liked 6,183 Times in 1,570 Posts
Default Sig P365

When they pop up they sell for around $500-$550 here in Texas. 12 round mag is still concealable but they take having a loader to get all 12 in the magazine.....ask me how I know.
Reply With Quote
The Following 2 Users Like Post:
  #9  
Old 09-17-2018, 11:59 PM
DADoser DADoser is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Dec 2015
Location: Tempe, AZ
Posts: 74
Likes: 145
Liked 114 Times in 36 Posts
Default

I got mine on July 19th by being at the right place, right time. Was in a LGS and pawn (AZ Firearms and Collectibles Tempe, AZ) on July 17th.

I thought I would pick up a 365 at some point - maybe Jan/Feb 2019.
Was looking at a Glock 26 for kicks. Asked the salesman if they had sold any P365's. He said they had 2 in the back that he couldn't sell yet (based on pawnshop rules in AZ - ?). I asked if I could take a look. One was built in March. One was built May 15, 2018; looked to have never been fired (and that's what the salesman said as well) - still w/ factory grease; had warranty card and all paperwork, etc - even the orange piece for ejection port/barrel. It was labeled "like new" and priced at $499. I put $100 down and he said he would be able to sell it on 7/19. I came back that day , paid it off, and walked out with a used/"like new" P365.

Those are the only two I have seen in 4 LGS in AZ. One has one for display only and one rental (C2 Tactical). Another shop (Healy Arms - Tempe, AZ) said they get about 2 at a time and they sell immediately. Sportsman's Warehouse in Mesa,Az says the same thing.

After buying it I put 1000 rounds of various cheap and quality ammo thru it. I had enough failures to extract that I was not confident to use it for EDC. I ended up contacting Sig and sending it in. Got it back last week - 9/13. Its had 400+ rounds through it after work done by Sig - including the 90 rounds Sig tested it with. All flawless function since I got it back. Sig took care of my Sig/me.

I'm very happy with it - shoots well; like the ergonomics; incredible capacity esp w/ the 12 rounder (same size as my Glock 43 w Pearse +1 extension.)

Vedder Light Tuck in "Purple Haze" with claw - in pic
Attached Images
File Type: jpg 365 vedder lt 1.jpg (131.4 KB, 43 views)
File Type: jpg 365 vedder lt 2.jpg (90.1 KB, 38 views)
File Type: jpg Sig P365 1.jpg (102.8 KB, 36 views)

Last edited by DADoser; 09-18-2018 at 12:21 AM.
Reply With Quote
The Following User Likes This Post:
  #10  
Old 09-18-2018, 09:27 AM
H Richard's Avatar
H Richard H Richard is offline
US Veteran
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Aug 2006
Location: West Central IL
Posts: 22,758
Likes: 18,437
Liked 22,313 Times in 8,245 Posts
Default

I did notice a very slight drag mark on the primer indents. Is this a sign of unlocking a little early? It is just a slight elongation of the primer dent.

I also discovered a Shield holster will fit it very well, a trifle lose, but snug enough when on the belt you could turn a somersault and not lose it. (You could not me).
__________________
H Richard
SWCA1967 SWHF244
Reply With Quote
The Following User Likes This Post:
  #11  
Old 09-18-2018, 09:41 AM
gnystrom gnystrom is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Oct 2009
Location: MN
Posts: 1,833
Likes: 1,062
Liked 2,109 Times in 860 Posts
Default

I bought one in Mid March and liked it so much I did something I have never done before, I bought a second one just because.
I stopped counting after 3000 rounds and it has been my daily carry for months.
I cringe when I hear "primer marks". I have a few mouse guns and everyone of them leaves an elongated swipe on the primer. I have found no down side to primer swipes with any of my guns.

As a RSO I can't tell you how many people have fired my gun and immediately picked one up.
To anybody looking for a small high capacity semi auto, test drive one of these wonders. Bring your billfold.

Last edited by gnystrom; 09-18-2018 at 09:47 AM.
Reply With Quote
The Following 3 Users Like Post:
  #12  
Old 09-18-2018, 10:15 AM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

Quote:
Originally Posted by H Richard View Post
I did notice a very slight drag mark on the primer indents. Is this a sign of unlocking a little early? It is just a slight elongation of the primer dent.

I also discovered a Shield holster will fit it very well, a trifle lose, but snug enough when on the belt you could turn a somersault and not lose it. (You could not me).
I have over 1,000 rounds through mine. The only (one) malfunction was shooter induced. My thumb pushed up on the slide lock during recoil. Primer drag marks are a non-issue IMHO, although I stay away from steel-cased ammo. I would think that a lot of steel cased ammo "might" put extra stress on the firing pin, if the firing pin dragged all the way to the edge of the primer pocket. My Sig P 365 has replaced my Kahr CM9 for EDC. I carry mine in a Vedder pocket holster. I do miss my Crimson Trace laser. I may get one, down the line, but then I'll need a new pocket holster.
Reply With Quote
  #13  
Old 09-19-2018, 10:11 AM
18DAI's Avatar
18DAI 18DAI is offline
Absent Comrade
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Sep 2005
Location: GSO NC
Posts: 6,106
Likes: 23,604
Liked 13,182 Times in 2,860 Posts
Default

The P365 is the 2nd best selling handgun at the LGS I work part-time in. It is exceeded in sales only by the Ruger EC9.

The terms "innovative" and "game changer" are overused in the gun world. And usually applied to guns which are neither. The 365 is both truly innovative and if sales and public interest are any indication, a game changer.

We sell every one we can get our hands on. And our customers tell us they love the gun. No reported issues either. Sig hit a home run with this model. Regards 18DAI
__________________
7 +1 Rounds of hope & change
Reply With Quote
The Following 3 Users Like Post:
  #14  
Old 09-19-2018, 10:30 AM
Jeppo's Avatar
Jeppo Jeppo is offline
SWCA Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Feb 2017
Location: Davidson County, NC
Posts: 2,114
Likes: 7,780
Liked 4,123 Times in 1,411 Posts
Talking

I'll bet that, had S&W brought such a pistol to market before anyone else, it would be saluted here as the holy grail.

Had that been the case, I'd have bought theirs (instead of buying two Sigs).
Reply With Quote
The Following 2 Users Like Post:
  #15  
Old 09-19-2018, 10:50 AM
Erich's Avatar
Erich Erich is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Jan 2003
Location: High Desert of NM, USA
Posts: 6,235
Likes: 9,320
Liked 8,805 Times in 2,553 Posts
Default

Did you all see Tam's write-up?
Shooting Illustrated | Review: SIG Sauer P365 Micro Compact
__________________
Now go make God proud...
Reply With Quote
The Following User Likes This Post:
  #16  
Old 09-19-2018, 08:40 PM
ladder13 ladder13 is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Jul 2005
Location: NC
Posts: 30,689
Likes: 57,536
Liked 52,812 Times in 16,465 Posts
Default

The “I hate plastic striker fired guns” folks got religion.

Last edited by ladder13; 09-19-2018 at 08:42 PM.
Reply With Quote
  #17  
Old 09-20-2018, 11:38 AM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

After all the people who now own the Sig P365 have had a chance to wring out their pistols, I've noticed that the drama has quieted down considerably.
Reply With Quote
The Following User Likes This Post:
  #18  
Old 09-20-2018, 11:46 AM
LVSteve's Avatar
LVSteve LVSteve is offline
Member
 
Join Date: Feb 2005
Location: Lost Wages, NV
Posts: 19,817
Likes: 24,223
Liked 28,979 Times in 10,765 Posts
Default

Quote:
Originally Posted by Erich View Post
Her thoughts on primer wipe got me thinking. I suspect that striker fired guns are more prone to this than hammer fired pistols with inertial firing pins. Here's my theory.

In a striker fired gun the firing pin is not withdrawn until the action cycles. If the striker is still protruding when the case hits the ejector, you get primer wipe.

With hammer fired guns the return spring on the inertial firing pin will tend to withdraw the firing pin before the case gets to the ejector, so no primer wipe.
__________________
Release the Kraken
Reply With Quote
The Following User Likes This Post:
  #19  
Old 09-20-2018, 11:50 AM
LVSteve's Avatar
LVSteve LVSteve is offline
Member
 
Join Date: Feb 2005
Location: Lost Wages, NV
Posts: 19,817
Likes: 24,223
Liked 28,979 Times in 10,765 Posts
Default

Quote:
Originally Posted by BE Mike View Post
After all the people who now own the Sig P365 have had a chance to wring out their pistols, I've noticed that the drama has quieted down considerably.
I finally got to handle one in a gun store yesterday. It is a remarkably small package for 10 rounds of 9mm. It fit my hand pretty well like my Kahr CW9, but at $599+taxes...

Still not sure I could carry a gun with that short a trigger and no trigger dingus.
__________________
Release the Kraken
Reply With Quote
  #20  
Old 09-20-2018, 12:07 PM
18DAI's Avatar
18DAI 18DAI is offline
Absent Comrade
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Sep 2005
Location: GSO NC
Posts: 6,106
Likes: 23,604
Liked 13,182 Times in 2,860 Posts
Default

Sig is telling us that the variant with a manual safety will arrive this fall. Which probably means next February. Regards 18DAI
__________________
7 +1 Rounds of hope & change
Reply With Quote
The Following 4 Users Like Post:
  #21  
Old 09-20-2018, 07:10 PM
Sayoc01 Sayoc01 is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Nov 2009
Posts: 520
Likes: 5
Liked 658 Times in 254 Posts
Default

I think it's great that ya'll have found your edc semi! I have no interest in getting one....my edc is the Glock 30s!
Jim
Reply With Quote
  #22  
Old 09-20-2018, 07:16 PM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

Quote:
Originally Posted by LVSteve View Post
I finally got to handle one in a gun store yesterday. It is a remarkably small package for 10 rounds of 9mm. It fit my hand pretty well like my Kahr CW9, but at $599+taxes...

Still not sure I could carry a gun with that short a trigger and no trigger dingus.
I bought one because of the high capacity, small size and the trigger. Glocks have had AD's, believe it or not, even with a trigger dingus.
Reply With Quote
The Following User Likes This Post:
  #23  
Old 09-20-2018, 07:21 PM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

Quote:
Originally Posted by 18DAI View Post
Sig is telling us that the variant with a manual safety will arrive this fall. Which probably means next February. Regards 18DAI
I've never been a fan of manual safeties except on single-action pistols, but to each his own.
Reply With Quote
  #24  
Old 09-20-2018, 07:24 PM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

Quote:
Originally Posted by LVSteve View Post
I finally got to handle one in a gun store yesterday. It is a remarkably small package for 10 rounds of 9mm. It fit my hand pretty well like my Kahr CW9, but at $599+taxes...

Still not sure I could carry a gun with that short a trigger and no trigger dingus.
The Sig does come with two magazines and night sights. Nothing against the Kahr. My EDC for years was the Kahr CM-9, until this baby came along.

Last edited by BE Mike; 09-20-2018 at 07:26 PM.
Reply With Quote
  #25  
Old 09-21-2018, 10:52 AM
gnystrom gnystrom is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Oct 2009
Location: MN
Posts: 1,833
Likes: 1,062
Liked 2,109 Times in 860 Posts
Default

We have had seven ND's by LEO's in our cleaning room. No fatalities but one guy now has four fingers on one hand. The dingus on the gun is worthless in the dingus in the brain fails to clear the gun before pulling the trigger to remove the slide.
Reply With Quote
The Following 3 Users Like Post:
  #26  
Old 09-21-2018, 10:56 AM
Jeppo's Avatar
Jeppo Jeppo is offline
SWCA Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Feb 2017
Location: Davidson County, NC
Posts: 2,114
Likes: 7,780
Liked 4,123 Times in 1,411 Posts
Default

Quote:
Originally Posted by gnystrom View Post
We have had seven ND's by LEO's in our cleaning room. No fatalities but one guy now has four fingers on one hand. The dingus on the gun is worthless in the dingus in the brain fails to clear the gun before pulling the trigger to remove the slide.
That's awful but might be a good reason for your department to adopt the P365 which doesn't require a trigger pull to remove the slide.
Reply With Quote
The Following 2 Users Like Post:
  #27  
Old 09-21-2018, 11:39 AM
gnystrom gnystrom is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Oct 2009
Location: MN
Posts: 1,833
Likes: 1,062
Liked 2,109 Times in 860 Posts
Default

Quote:
Originally Posted by Jeppo View Post
That's awful but might be a good reason for your department to adopt the P365 which doesn't require a trigger pull to remove the slide.
A very interesting and sane response. Their solution, if you can believe it, was to partition off each cleaning station with bulletproof dividers. Glock must have a very strong lobby with LEO agencies. I suspect Sig is rubbing their hands and waiting quietly in the background.
Reply With Quote
The Following User Likes This Post:
  #28  
Old 09-21-2018, 12:00 PM
18DAI's Avatar
18DAI 18DAI is offline
Absent Comrade
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Sep 2005
Location: GSO NC
Posts: 6,106
Likes: 23,604
Liked 13,182 Times in 2,860 Posts
Default

Why mount the brake on the gas pedal. Never understood that. I have witnessed two officers give themselves "Glock ***". No thanks. Regards 18DAI
__________________
7 +1 Rounds of hope & change
Reply With Quote
The Following User Likes This Post:
  #29  
Old 09-21-2018, 04:00 PM
Jeppo's Avatar
Jeppo Jeppo is offline
SWCA Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Feb 2017
Location: Davidson County, NC
Posts: 2,114
Likes: 7,780
Liked 4,123 Times in 1,411 Posts
Exclamation

Quote:
Originally Posted by gnystrom View Post
A very interesting and sane response. Their solution, if you can believe it, was to partition off each cleaning station with bulletproof dividers. Glock must have a very strong lobby with LEO agencies. I suspect Sig is rubbing their hands and waiting quietly in the background.
We're I the boss, I'd have taken a much cheaper approach. I'd have invested a few bucks in HUGE signs for each bay...

If you discharge your weapon and survive, immediately go clean out your locker!

Last edited by Jeppo; 09-22-2018 at 03:37 PM.
Reply With Quote
The Following 5 Users Like Post:
  #30  
Old 09-21-2018, 04:06 PM
Telecaster Telecaster is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Dec 2015
Posts: 2,498
Likes: 852
Liked 4,534 Times in 1,504 Posts
Default

Quote:
Originally Posted by Jeppo View Post
I'll bet that, had S&W brought such a pistol to market before anyone else, it would be saluted here as the holy grail.

Had that been the case, I'd have bought theirs (instead of buying two Sigs).
So how does the Shield differ from the P365, exactly?
Reply With Quote
  #31  
Old 09-21-2018, 04:16 PM
Jeppo's Avatar
Jeppo Jeppo is offline
SWCA Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Feb 2017
Location: Davidson County, NC
Posts: 2,114
Likes: 7,780
Liked 4,123 Times in 1,411 Posts
Default

Quote:
Originally Posted by Telecaster View Post
So how does the Shield differ from the P365, exactly?
They're both 9mm.
One holds 8+1, the other holds 12+1 as shown in these photos.
Attached Images
File Type: jpg IMG_5885.jpg (56.3 KB, 67 views)
File Type: jpg IMG_5884.jpg (49.8 KB, 66 views)
Reply With Quote
The Following 4 Users Like Post:
  #32  
Old 09-21-2018, 07:12 PM
Erich's Avatar
Erich Erich is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Jan 2003
Location: High Desert of NM, USA
Posts: 6,235
Likes: 9,320
Liked 8,805 Times in 2,553 Posts
Default

Nice pix, Jeppo.
__________________
Now go make God proud...
Reply With Quote
The Following 2 Users Like Post:
  #33  
Old 09-21-2018, 08:27 PM
18DAI's Avatar
18DAI 18DAI is offline
Absent Comrade
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Sep 2005
Location: GSO NC
Posts: 6,106
Likes: 23,604
Liked 13,182 Times in 2,860 Posts
Default

AND you dont have to rebuild the 365 with Apex parts after you buy it. To give it everything the factory couldnt be bothered too. Regards 18DAI
__________________
7 +1 Rounds of hope & change
Reply With Quote
The Following User Likes This Post:
  #34  
Old 09-22-2018, 02:45 PM
gnystrom gnystrom is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Oct 2009
Location: MN
Posts: 1,833
Likes: 1,062
Liked 2,109 Times in 860 Posts
Default

Quote:
Originally Posted by Telecaster View Post
So how does the Shield differ from the P365, exactly?
I think they are different guns. Capacity aside, the Shield is quite a bit larger. The Sig can actually fit in a front pocket holster albeit tight in a pair of jeans. A Kahr PM9 is MUCH better for pocket carry in my opinion. The pictures posted really do not show just how much smaller the Sig is when compared to the Shield. Believe me, S&W would have killed to come up with this gun before Sig.

The Sig has a more rounded grip with a nice undercut at the trigger guard. My Glocks and Shield never fit my XL hands very well and for some reason the smaller rounded grip if the Sig is perfect.
The Sig has night sights from the factory.
I sold my Shield because it never fit into a "keeper" category for me.
It was too big for some tasks and too small for others plus the fact I was never very good with the Shield. I never liked the thin deep grip.
My Shield was a early on new firearm. $399. Apex sear was a must, add $50. Meprolight night sights which really helped were $80 + $20 to install. Talon grip tape another $20 but a big improvement so about $569 total.
My P365 needs nothing and I paid $515 for each of them about 4 months apart.
I am not saying it is for everybody and bend over if you buy extra mags but like I said before, it is the only gun of which I have an exact duplicate in the safe.

Last edited by gnystrom; 09-23-2018 at 10:15 AM.
Reply With Quote
The Following 2 Users Like Post:
  #35  
Old 09-22-2018, 10:14 PM
moralem moralem is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Dec 2009
Posts: 2,451
Likes: 240
Liked 6,183 Times in 1,570 Posts
Default

Well I finally shot mine and I am going to have to learn a different grip. I think I am holding the thing to tightly. Point of impact was to the left of point of aim. I called Sig customer service and the rep said he had the same problem with his. So next time out I will lighten up on the grip and see how it goes. I did adjust my aim a few degrees right and I was punching out the center of the target. It was very strange to have to aim off center to hit center......
Reply With Quote
  #36  
Old 09-22-2018, 10:18 PM
SATX's Avatar
SATX SATX is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: May 2017
Posts: 292
Likes: 223
Liked 264 Times in 136 Posts
Default

Looking forward to getting one. I won’t sell my Shield.
Reply With Quote
  #37  
Old 09-22-2018, 11:58 PM
DADoser DADoser is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Dec 2015
Location: Tempe, AZ
Posts: 74
Likes: 145
Liked 114 Times in 36 Posts
Default

Officially changed my EDC today from my Glock 43 to my SIG P365.

Long story short -
First 1K rounds - 7 FTExtract/1 light primer strike.
Sent to Sig.
Since receiving it back - 550+ rounds flawless - various ammo - cheap and quality.
Totally confident in this particular pistol.

When I made the switch - I'm still amazed that I emptied 2 OEM magazines (w/ Pearce +1 extensions) and I put all but two rounds in a single twelve round Sig P365 magazine.
Attached Images
File Type: jpg EDC Switch 1.jpg (80.9 KB, 24 views)
File Type: jpg EDC Switch 2.jpg (81.3 KB, 29 views)
Reply With Quote
The Following User Likes This Post:
  #38  
Old 09-23-2018, 09:22 AM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

Quote:
Originally Posted by LVSteve View Post
I finally got to handle one in a gun store yesterday. It is a remarkably small package for 10 rounds of 9mm. It fit my hand pretty well like my Kahr CW9, but at $599+taxes...

Still not sure I could carry a gun with that short a trigger and no trigger dingus.
I thought I'd mention that I was at a new little shop the day before yesterday. The owner couldn't wait to tell me that he got in a couple of Sig P 365's. They were priced at $550.
Reply With Quote
The Following User Likes This Post:
  #39  
Old 09-23-2018, 10:21 AM
gnystrom gnystrom is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Oct 2009
Location: MN
Posts: 1,833
Likes: 1,062
Liked 2,109 Times in 860 Posts
Default

Quote:
Originally Posted by moralem View Post
Well I finally shot mine and I am going to have to learn a different grip. I think I am holding the thing to tightly. Point of impact was to the left of point of aim. I called Sig customer service and the rep said he had the same problem with his. So next time out I will lighten up on the grip and see how it goes. I did adjust my aim a few degrees right and I was punching out the center of the target. It was very strange to have to aim off center to hit center......
Don't aim at anything but the center of your target. If you are right handed and hitting directly left of center, it could be your tight grip but more likely you are using too much finger on the trigger. If you are using a two hand grip, try applying more grip pressure with your support hand and use the center of the pad on your trigger finger.
Reply With Quote
  #40  
Old 09-23-2018, 10:30 AM
moralem moralem is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Dec 2009
Posts: 2,451
Likes: 240
Liked 6,183 Times in 1,570 Posts
Default

Quote:
Originally Posted by gnystrom View Post
Don't aim at anything but the center of your target. If you are right handed and hitting directly left of center, it could be your tight grip but more likely you are using too much finger on the trigger. If you are using a two hand grip, try applying more grip pressure with your support hand and use the center of the pad on your trigger finger.
Right handed, hitting directly left of center.....at least knowing the variables that can affect point of impact will give me something to work on.......I also ordered the Sig Lima 365 green laser to see if I can improve my aim with an aid.....no judging I am old with even older eyes.
Reply With Quote
  #41  
Old 09-23-2018, 10:37 AM
CDR_Glock CDR_Glock is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Oct 2016
Posts: 246
Likes: 460
Liked 310 Times in 114 Posts
Default

If I can consistently hit a 6 inch plate at 15 yards and my 10 and 12 inch plates at 25 yards, I’m pretty darn happy.

I was hitting the Dueling tree at 15 yards with it, very easily. The sights are awesome. They’re set up as combat sights, meaning you cover the target with the front sight. Even at 25 yards.

I’m only up to about 500 rounds in it. No failures of any sort.
Reply With Quote
  #42  
Old 09-23-2018, 10:40 AM
joe44va's Avatar
joe44va joe44va is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Oct 2014
Location: Central VA
Posts: 2,535
Likes: 3,774
Liked 4,332 Times in 1,548 Posts
Default

Some guns fit some folks better than others. Here's my two P365s and my 3" 686+, all at 30'. Yeah, I know, apples and lemons.
Attached Images
File Type: jpg 686+ vs P365.jpg (65.4 KB, 32 views)
__________________
Foster Positivity.
Reply With Quote
  #43  
Old 09-23-2018, 10:43 AM
ladder13 ladder13 is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Jul 2005
Location: NC
Posts: 30,689
Likes: 57,536
Liked 52,812 Times in 16,465 Posts
Default

Saw one a few weeks ago while cruising the lgs’s with a forum member who has two. It was priced at $459.99. I left it there.
I have plenty of carry guns.
Reply With Quote
  #44  
Old 09-23-2018, 12:16 PM
DepOne's Avatar
DepOne DepOne is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Feb 2012
Location: Southeast US
Posts: 75
Likes: 4
Liked 68 Times in 36 Posts
Default

Quote:
Originally Posted by moralem View Post
Right handed, hitting directly left of center.....at least knowing the variables that can affect point of impact will give me something to work on.......I also ordered the Sig Lima 365 green laser to see if I can improve my aim with an aid.....no judging I am old with even older eyes.
Sig makes great stuff but the design of their P365 green laser leaves a lot to be desired. The activation button doesn't protrude far enough to be activated without a death grip on the gun, and it's placement is not ergonomically correct. Even with the death grip you have to assume a very UN-natural grip to activate the button which plays havoc with shot placement.

And, by the way, if the blister pack is opened they won't take it back. How do you even know it is not defective until you open the package? They gotcha! VERY un_Siglike behavior.
Reply With Quote
  #45  
Old 09-23-2018, 12:43 PM
moralem moralem is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Dec 2009
Posts: 2,451
Likes: 240
Liked 6,183 Times in 1,570 Posts
Default

Quote:
Originally Posted by DepOne View Post
Sig makes great stuff but the design of their P365 green laser leaves a lot to be desired. The activation button doesn't protrude far enough to be activated without a death grip on the gun, and it's placement is not ergonomically correct. Even with the death grip you have to assume a very UN-natural grip to activate the button which plays havoc with shot placement.



And, by the way, if the blister pack is opened they won't take it back. How do you even know it is not defective until you open the package? They gotcha! VERY un_Siglike behavior.


I purchased from Planet optics......great customer service so if the laser isn’t up to snuff they have an easy return policy.

I did read some of the reviews but I am willing to take a chance on it at least for range use.


Sent from my iPhone using Tapatalk
Reply With Quote
  #46  
Old 09-23-2018, 01:08 PM
Jeppo's Avatar
Jeppo Jeppo is offline
SWCA Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Feb 2017
Location: Davidson County, NC
Posts: 2,114
Likes: 7,780
Liked 4,123 Times in 1,411 Posts
Default

Quote:
Originally Posted by ladder13 View Post
Saw one a few weeks ago while cruising the lgs’s with a forum member who has two. It was priced at $459.99. I left it there.
I have plenty of carry guns.
$460 new??????
Reply With Quote
  #47  
Old 09-23-2018, 01:59 PM
ladder13 ladder13 is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Jul 2005
Location: NC
Posts: 30,689
Likes: 57,536
Liked 52,812 Times in 16,465 Posts
Default

Quote:
Originally Posted by Jeppo View Post
$460 new??????
Yep @smokin barrel? in Raleigh/Garner. I doubt it’s still there.
Reply With Quote
The Following User Likes This Post:
  #48  
Old 09-24-2018, 09:25 AM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
Sig P365 Sig P365 Sig P365 Sig P365 Sig P365  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

Quote:
Originally Posted by moralem View Post
Well I finally shot mine and I am going to have to learn a different grip. I think I am holding the thing to tightly. Point of impact was to the left of point of aim. I called Sig customer service and the rep said he had the same problem with his. So next time out I will lighten up on the grip and see how it goes. I did adjust my aim a few degrees right and I was punching out the center of the target. It was very strange to have to aim off center to hit center......
Every time I shoot a polymer pistol, it groups a couple of inches to the left at around 25 yards. Last Friday, I shot a buddy's new M&P and the same happened. I am far from new to pistol shooting and shot bullseye for decades, as well as, several other disciplines, including PPC, double-action, with a revolver. I now have a Sig P 320 compact and a Sig P 365. I hold with a tight grip..."Tight grip=tight group!" My solution to grouping a couple of inches left was to move the rear sight to the right a little. After over 1,600 rounds through my P320 and over 1,200 round through the P 365, my groups are still centered after a sight adjustment. I think that it has something to do with my eyes or eyeglasses, but who knows? If you can hold a good group at 25 yards, I'd just move the sights. Just a tip: A sight pusher comes in handy and a little movement goes a long way. I used a pencil and shaved the lead to a fine point to make a witness mark on the slide and sight.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sig Sauer P365 Collo Rosso Firearms & Knives: Other Brands & General Gun Topics 47 12-02-2018 01:13 AM
S&w M&P 2.0 3.6 compact vs Sig P365 subcompact sud Smith & Wesson M&P Pistols 9 08-26-2018 08:32 AM
How long until S&W has an answer to the Sig P365? fallhunter Smith & Wesson M&P Pistols 65 07-04-2018 10:18 PM
Sig P365 creekman Firearms & Knives: Other Brands & General Gun Topics 43 06-23-2018 09:37 AM
Sig P365 Groundhog34 Firearms & Knives: Other Brands & General Gun Topics 9 02-13-2018 03:12 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 06:39 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)