Smith & Wesson Forum

Go Back   Smith & Wesson Forum > General Topics > Firearms & Knives: Other Brands & General Gun Topics
o

Notices

Firearms & Knives: Other Brands & General Gun Topics Post Your General Gun Topics and Non-S&W Gun and Blade Topics Here


Reply
 
Thread Tools Display Modes
  #1  
Old 11-27-2020, 11:40 PM
Art Doc's Avatar
Art Doc Art Doc is offline
SWCA Member
Absent Comrade
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jul 2002
Location: The kidney of Dixie.
Posts: 10,509
Likes: 49
Liked 13,408 Times in 3,290 Posts
Default Trapdoor H&R

Sometime in the late 1990s I was perusing Gunbroker and saw this H&R 45-70 Trapdoor carbine. Looked cool so I threw the starting bid on it. I really felt the starting price was about all the rifle was worth and vowed not to bid any higher. I think I'm one of the few people who can actually keep that promise on an auction. Apparently everyone else agreed with me on the value and my one bid was the only one.

Right away the seller started complaining in emails about the low selling price. Well, I think buyer and seller should both be happy with a deal so I offered to call off the transaction if he paid the auction site the fee he owed them. I think it was about $11 so for that amount he could cancel the sale and not feel bad about the low price. But he replied that he wanted to go ahead with the transaction and the complaining stopped.

The gun was like new when I got it. Problem is it weighs like 6 pounds and I'm very recoil sensitive. This thing kicks like a mule with anything approaching full power loads. With loads about like a hot 45 Colt I can shoot it fine.

__________________
No life story has happy end.
Reply With Quote
  #2  
Old 11-27-2020, 11:59 PM
biku324's Avatar
biku324 biku324 is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jan 2011
Location: NM home; Tbilisi work
Posts: 5,106
Likes: 11,822
Liked 11,550 Times in 3,500 Posts
Default

I have one....with cowboy loads my wife and I both enjoy it very much. I added the Skinner ladder sight.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 11-28-2020, 12:31 AM
merl67 merl67 is offline
SWCA Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Apr 2011
Location: Northern Middle Tennessee
Posts: 2,898
Likes: 3,413
Liked 4,084 Times in 1,449 Posts
Default

I had two original ones, and even with full rifles the recoil is stout. The beauty of reloading is the fact you can tailor your loads. My niece once came to me, and wanted to start carrying a gun for self protection, so she came over to the house, and we shot everything I had including my S&W model 29-2 with a 4 inch barrel. I had some mild loads prepared especially for her, enough power to know she had touched off something with some power, but nothing that would make her gun shy. I was taking a few pictures I managed to snap one with it recoiling still one of my favorite photos.
__________________
Randy
Reply With Quote
The Following User Likes This Post:
  #4  
Old 11-28-2020, 01:42 AM
Fishinfool's Avatar
Fishinfool Fishinfool is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Feb 2011
Location: Central PA
Posts: 4,550
Likes: 8,201
Liked 11,436 Times in 3,018 Posts
Default

Nice looking rifle. I don't know why the curved metal "rifle" butt plate was so popular with early rifles, compared to the much more comfortable flat "shotgun" style butt's.

I have seen several companies on line that make slip on recoil pads for curved butt rifles. Takes the sting out of firing them without any permanent alterations to the rifle.

Larry
Reply With Quote
The Following User Likes This Post:
  #5  
Old 11-28-2020, 01:43 AM
k22fan k22fan is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Feb 2010
Posts: 5,835
Likes: 5,161
Liked 5,242 Times in 2,483 Posts
Default

Back in the 1970s when I shot a lot of muzzle loaders H&R had a full length infantry version of their Trap Door. I still regret not buying a nearly new one that I saw in a local gun store for $100. Of course it's easy to forget my budget in those days, inflation etc.

Over the years I had the loan of two 19 Century Trap Door rifles that had been shortened and fired a friends original rifle quite a bit. The old barrels are over size for modern bullets and vary a lot in dimensions. Black powder bumped the soft lead bullets up in diameter so easily that precise dimensions did not matter. I assume H&R groove diameters are pretty close to .458". That would be ideal to work with. they're great fun.
Reply With Quote
  #6  
Old 11-28-2020, 01:55 AM
.357magger .357magger is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jun 2006
Location: New Orleans, LA
Posts: 1,485
Likes: 3,140
Liked 3,120 Times in 775 Posts
Default

I've always wanted one of the H&Rs, more than an original as I'm more of a shooter than collector. Just haven't found one for the price I want. Have lost a couple of auctions over the years when I saw them.

I've fired one owned by a buddy with what he described as "cowboy loads". Not punishing, but you know you've fired a rifle when you touch one off.

Thanks for sharing yours.
Reply With Quote
The Following 3 Users Like Post:
  #7  
Old 11-28-2020, 09:15 AM
jake1945's Avatar
jake1945 jake1945 is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Dec 2011
Location: S.E. Iowa
Posts: 672
Likes: 286
Liked 726 Times in 304 Posts
Default

There was/is complaints with the H&R trapdoors. When fired, the lock would open creating dangerous situations. H&R never corrected the problem which is why most savvy people shy away from them. It's better to buy REAL Springfield trapdoors and be safe!
Reply With Quote
The Following User Likes This Post:
  #8  
Old 11-28-2020, 01:15 PM
biku324's Avatar
biku324 biku324 is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jan 2011
Location: NM home; Tbilisi work
Posts: 5,106
Likes: 11,822
Liked 11,550 Times in 3,500 Posts
Default

I've fired my H&R over a thousand rounds with no trouble. Never heard about a problem anywhere before.
Reply With Quote
The Following 2 Users Like Post:
  #9  
Old 11-28-2020, 01:40 PM
LoboGunLeather's Avatar
LoboGunLeather LoboGunLeather is offline
US Veteran
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Nov 2008
Location: Colorado
Posts: 7,518
Likes: 19,273
Liked 32,340 Times in 5,474 Posts
Default

I have original Trapdoor Springfields that I shoot and have taken on hunting trips. With anything approaching a full load the recoil is significant, to put it mildly. Standard load for the infantry rifle was .45-70-500 (70 grains BP, 500-grain lead bullet). Standard load for the carbines was .45-55-405 (same case, 55 grains BP, 405-grain lead bullet). If my experience is any guide, groove diameters can be expected to be from .460" to .464" or so.

Lots of the originals after the early 1880's went from Springfield Armory to state militia units, and many remained there well after WW1. By the Depression years Trapdoors were being sold off for as little as $2 each. I remember seeing these in stores during the 1960's and 1970's, usually well under $100. Thousands were turned into standing electric lamps, and many more probably didn't survive the WW2 emergency scrap metal drives. Bannerman's purchased tons of surplus Trapdoors and converted many of the rifles to the carbine configuration, which was much more popular for hunting use. Consequently, surviving Trapdoors in original condition are highly prized collectibles, particularly original Cavalry Carbines.

Much of my shooting uses a 340-grain cast RN-FP with 25 grains IMR-4198. Probably about 1200FPS, modest recoil, deadly on Colorado mule deer. Trajectory might be compared to a "hail Mary" pass in the final couple of seconds in a championship football game.

One of the H&R Trapdoor reproductions came my way in a trade several years ago (at very little investment on my part). Fit and finish was quite good, and I think they did a pretty good job with that product line. I did not fire the rifle, sold it on to an enthusiastic young guy who was very happy to get it.
Reply With Quote
The Following 5 Users Like Post:
  #10  
Old 11-28-2020, 01:47 PM
Scharfschuetzer's Avatar
Scharfschuetzer Scharfschuetzer is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jan 2014
Location: Puget Sound Area
Posts: 888
Likes: 39
Liked 2,388 Times in 649 Posts
Default

I've been a collector of original Trapdoors for many years. I've also bought and shoot two different H&R Officer Model Trapdoors and find them easy to load for and very accurate.

Of course you know this, but the Army issued a cavalry load for the carbines and that was a 405 grain cast bullet over 55 grains of black powder for something like 1,100 fps. This was to moderate the recoil in the carbines.

I duplicate the carbine load with my own cast 405 grain bullets (both Lee and Lyman moulds) at 1,100 fps out of the H&R Trapdoors. This is a very accurate load in the H&Rs and holds 2 MOA out past 300 yards and will clang steel much farther than that. A faster pistol powder provides the velocity as well as good ballistic uniformity for long range shooting and the recoil is certainly tolerable out of light rifles.

If you don't reload, this is probably a good reason to start. A Lee Loader in 45/70 (if you can find one) will get you started in fine shape and commercially cast 405 grain bullets are easy to come by.

By the way, that's a beautiful piece of wood your H&R.
__________________
Keep your powder dry.

Last edited by Scharfschuetzer; 11-28-2020 at 01:55 PM.
Reply With Quote
The Following 3 Users Like Post:
  #11  
Old 11-28-2020, 01:57 PM
Drm50 Drm50 is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Oct 2014
Location: Monroe cnty. Ohio
Posts: 6,923
Likes: 4,410
Liked 10,022 Times in 3,676 Posts
Default

There is a local that has been trying to sell a H&R Officers Model Trap Door for several months. He has $700 on it. Rifle is mint and has long range sight, Lyman dies and some new brass, bullets with it. Looks like a good deal for a person that would want it. The $700 tag puts it in money of a lever action and here in Ohio levers are king.
Reply With Quote
The Following 2 Users Like Post:
  #12  
Old 11-28-2020, 07:37 PM
ordnanceguy ordnanceguy is offline
SWCA Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jan 2002
Location: Sunny Florida, USA
Posts: 1,824
Likes: 120
Liked 4,126 Times in 812 Posts
Default

Gentlemen:

I, too, am a fan of the H&R Trapdoor reproductions. I have owned several original M1873 rifles but never felt comfortable shooting a 140 year old rifle. They all appeared to be in good shape, but who could say what kind of loads it shot 75 years ago? I never shot any of the originals.

Although I have never really liked or been attracted to replica/reproduction/commemorative guns I bought one of the Cavalry carbines. It was and is handsome, well made and fun to shoot. Never had a problem with it, although I did have a pal who shot his own Carbine once and had the Trapdoor pop up unexpectedly. We ascribed that to a bad load but perhaps there was more to it than we realized. I will say that I have never heard of anyone complaining about the H&R Trapdoors, except their relative scarcity.

Because I enjoyed shooting the Carbine I leaped when I had the chance to buy a nice condition Officers Model out of an estate. I have not shot it yet as I am still puzzling over the rear sight which, to my eye, seems rather flimsy and difficult to use. Otherwise, it is a beautiful rifle and a credit to the craftmanship that H&R put into these guns.

In my archives I had saved a copy of the H&R advertisement seen below from the early 1970s which I thought you guys would enjoy seeing.

__________________
Charlie Flick
SWCA 729 HF 215

Last edited by ordnanceguy; 11-28-2020 at 07:44 PM.
Reply With Quote
  #13  
Old 11-28-2020, 08:02 PM
Farmer17 Farmer17 is offline
Member
 
Join Date: Jan 2005
Location: Edmond, OK
Posts: 5,214
Likes: 1,133
Liked 6,603 Times in 2,457 Posts
Default

QUOTE:
I remember seeing these in stores during the 1960's and 1970's, usually well under $100. Thousands were turned into standing electric lamps, and many more probably didn't survive the WW2 emergency scrap metal drives.

Many years ago when I lived in Georgetown, TX I knew a guy who bought a Trapdoor carbine at an antique store for $75 and it had been made into a standing lamp. He wasn't a gun guy or hunter he was an antique collector but made it back into a rifle and later located an original bullet mold and plier type reloading tool. He became a deer hunter and bagged a deer about every year with it making his own bullets AND homemade black powder! I don't know what his loads were but it didn't kick bad at all and had a nice trigger and I was able to hit a paint can size rock on the side of a hill, off hand at 100 yards. Gun was well-made and accurate and was really fun to shoot!

Last edited by Farmer17; 11-29-2020 at 01:57 PM.
Reply With Quote
The Following 5 Users Like Post:
  #14  
Old 11-28-2020, 08:17 PM
deadin's Avatar
deadin deadin is offline
US Veteran
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Nov 2004
Location: Ocean Shores, WA, USA
Posts: 5,775
Likes: 201
Liked 5,063 Times in 1,767 Posts
Default

It's my understanding that the Beechblock "popping" open on some of the H&R's was due to the 2 piece cam and shaft that they used. (The originals were milled out of one piece) Sometimes the swaged fit would loosen up and allow the cam to become disengaged.
The solution was to pin the parts, or just use an original cam and shaft. (I've been told they will interchange.)


Quote:
There is a local that has been trying to sell a H&R Officers Model Trap Door for several months. He has $700 on it.
I could be interested in this one if he would be willing to ship it. I have an original OM but am unwilling to shoot it. (Too valuable and no bore left in it..)
__________________
Dean
SWCA #680 SWHF #446

Last edited by deadin; 11-28-2020 at 08:27 PM.
Reply With Quote
The Following 3 Users Like Post:
  #15  
Old 12-20-2020, 11:04 PM
Muley Gil Muley Gil is offline
US Veteran
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,471
Likes: 88,955
Liked 24,774 Times in 8,480 Posts
Default

I heard about the H&Rs unlocking years ago. I've never owned one.

I have owned an infantry rifle and another rifle cut down to carbine length. I've shot both with modern smokeless loads. The 300 grain bullet round does well in my quasi-carbine.
__________________
John 3:16
WAR EAGLE!
Reply With Quote
  #16  
Old 12-20-2020, 11:42 PM
Seamus O'Caiside Seamus O'Caiside is offline
Absent Comrade
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jul 2020
Posts: 107
Likes: 141
Liked 192 Times in 62 Posts
Default

Have you checked the price of .45-70 factory ammo lately? I don't have a rifle for it, but just out of curiosity I checked out the price on Ammoseek last night. Only one dealer had some, at $3.50 per bullet. Two hours later I looked again. Nobody had any. One dealer had .444 Marlin for $6.50 per boolit. Not per box, per boolit!!!!!!
Reply With Quote
  #17  
Old 12-20-2020, 11:56 PM
Ivan the Butcher Ivan the Butcher is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jan 2008
Location: Harlem, Ohio
Posts: 14,353
Likes: 23,195
Liked 26,153 Times in 9,068 Posts
Default

A couple of hints: On H&R trapdoors You want one with a Serial number below 5000. Higher than that are post Bicentennial production, and quality fell quite a bit. A friend has a H&R Officers model in the 300 range, it is as accurate as my Shiloh Sharps!

Tip Two: with all the rifles cut down into carbines a few pointers on how to tell an original. The but plate has no trap door in it and the stock below the butt plate is not drilled! When you cock the hammer, only a real carbine action has 3 clicks to it.

When dating an action, only 4 carbines were made in 1876 (mine and 3 others) so the odds are your 1876 carbine is a fake. (has to do with "Pre Custer" carbines bring a premium.) There were a number of 1870 model carbines at the Little Big Horn, but they were ALL firing at Custer!, so it needs to be a 1873 Model in 45-70, not 50 Carbine! (I have a "Parts" rolling block in 50 Carbine, that is the most fun you can have with a Black Powder cartridge gun! 425 grain bullet and 50 grains FFg. Recoil is very very mild)

NRA condition rules are very loose on antiques, but cavalry carbines and revolvers are suppose to be rough! Mine is a beauty with 5% blue left! If it looks to good to be true, IT IS!

Ivan

Last edited by Ivan the Butcher; 12-20-2020 at 11:57 PM.
Reply With Quote
The Following 2 Users Like Post:
  #18  
Old 12-21-2020, 12:52 AM
BigBill BigBill is offline
Absent Comrade
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jan 2011
Location: Planet earth
Posts: 13,869
Likes: 2,079
Liked 13,352 Times in 5,549 Posts
Default

I always wanted a 45/70 in a long barrel lever action. Marlin offers it now.
__________________
Plant garlic in the fall
Reply With Quote
The Following User Likes This Post:
  #19  
Old 12-21-2020, 01:00 AM
jframejoey jframejoey is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jan 2013
Location: New England
Posts: 1,357
Likes: 10,048
Liked 1,001 Times in 491 Posts
Default

Art Doc, have you looked into a 45-70 to 45 LC adapter so you can plink with that carbine?
Reply With Quote
The Following User Likes This Post:
  #20  
Old 12-21-2020, 07:40 AM
Neversink n Klapperthal's Avatar
Neversink n Klapperthal Neversink n Klapperthal is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Sep 2019
Posts: 772
Likes: 1,655
Liked 1,123 Times in 435 Posts
Default

as beautiful as that rifle is i think i could tolerate the recoil.You do know you press the butt firmly into the shoulder,right?
Reply With Quote
  #21  
Old 12-21-2020, 08:36 AM
Sgt911 Sgt911 is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jun 2015
Posts: 642
Likes: 942
Liked 833 Times in 340 Posts
Default

Quote:
Originally Posted by Farmer17 View Post
QUOTE:
I remember seeing these in stores during the 1960's and 1970's, usually well under $100. Thousands were turned into standing electric lamps, and many more probably didn't survive the WW2 emergency scrap metal drives.

Many years ago when I lived in Georgetown, TX I knew a guy who bought a Trapdoor carbine at an antique store for $75 and it had been made into a standing lamp. He wasn't a gun guy or hunter he was an antique collector but made it back into a rifle and later located an original bullet mold and plier type reloading tool. He became a deer hunter and bagged a deer about every year with it making his own bullets AND homemade black powder! I don't know what his loads were but it didn't kick bad at all and had a nice trigger and I was able to hit a paint can size rock on the side of a hill, off hand at 100 yards. Gun was well-made and accurate and was really fun to shoot!
I hope he watched the movie "The Great Outdoors" and remembered to plug that rifle in.
Reply With Quote
  #22  
Old 12-21-2020, 09:55 AM
Scharfschuetzer's Avatar
Scharfschuetzer Scharfschuetzer is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jan 2014
Location: Puget Sound Area
Posts: 888
Likes: 39
Liked 2,388 Times in 649 Posts
Default

"It's my understanding that the Beechblock "popping" open on some of the H&R's was due to the 2 piece cam and shaft that they used. (The originals were milled out of one piece) Sometimes the swaged fit would loosen up and allow the cam to become disengaged.
The solution was to pin the parts, or just use an original cam and shaft. (I've been told they will interchange.)
"

That is correct. I've never had this happen in many, many rounds fired over almost 50 years with an H&R, but it happened to a good friend and gunsmith friend of mine. He fitted an original breach block to his OM H&R with excellent results. The two part cam latch was probably the only misstep that H&R made with the rifle, although it is only a very occasional issue.

"Art Doc, have you looked into a 45-70 to 45 LC adapter so you can plink with that carbine?"

The bore diameter of the H&R is 458" and 45 Colt ammo is usually .451" to .452" in diameter. I do have a 45 Colt bullet mould that throws a 455" bullet, but even that is too small and provides no accuracy. Paper patching a .451" bullet should actually work very well if one wanted to go through the machinations to do so.

The army did use an almost pure lead 45 Colt bullet over black powder as a practice load and even issued loading sets for same. Apparently the soft bullet would swage up to the bore diameter of the rifle when fired over black powder. While I've read of this approach ("40 Miles a Day on Beans and Hay" if I recall correctly), no mention was made of its accuracy.

I use a Rapine mould (no longer in business) 270 grain .460" diameter cast bullet in my original Trapdoors to duplicate the old practice load.
__________________
Keep your powder dry.

Last edited by Scharfschuetzer; 12-21-2020 at 10:02 AM.
Reply With Quote
  #23  
Old 12-21-2020, 10:56 AM
TIMETRIPPER TIMETRIPPER is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: May 2010
Location: Pennsylvania
Posts: 1,697
Likes: 1,525
Liked 1,822 Times in 735 Posts
Default

They are fun!
As said, reloading is the best way to feed a trapdoor, especially the originals. 10 grains of Unique with magnum rifle primers is an accurate load in my original 1884 rifle and is easy on the shoulder. That's using Lymans 385 gr bullet sized to .458". The 500 grain version will thump you a lot harder! In any case, it is best to use all lead in the originals.
I got my TD via a trade at a gun show a few years ago. It was missing the Buffington style rear sight but I managed to find a replacement at the same show.
It's also a carbine configuration but has been modified somewhat which explains the price. Stock has the saddle ring bar, was bedded, and has some nice checking on the forearm.
The original front sight is gone and replaced with a two piece ramp. Crown looks to have been recut but the bore is excellent. It may very well have been a Bannerman gun that had a little extra attention into making it a sporting rifle by a past owner. And though I can ring an 8" gong offhand at 50 yards all day with it, and the 12" at 100, I plan to replace the Buffington with something more practical for the deer woods.

John
Reply With Quote
The Following User Likes This Post:
  #24  
Old 12-21-2020, 11:55 AM
Harrison Harrison is offline
US Veteran
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Mar 2010
Location: Central Texas
Posts: 2,601
Likes: 8,743
Liked 1,813 Times in 797 Posts
Default Trapdoor 45-70

Have you tried blackpowder loads. They are often more comfortable to shoot than modern smokeless powder loads
__________________
Can my S&W Mdl 10 shoot +P
Reply With Quote
The Following 2 Users Like Post:
  #25  
Old 12-21-2020, 12:07 PM
2152hq 2152hq is offline
Member
Trapdoor H&R  
Join Date: Sep 2005
Posts: 7,724
Likes: 1,633
Liked 9,091 Times in 3,362 Posts
Default

The founder of Dixie Gun Works,,Turner Kirkland (sp?) used to buy up just about any TrapDoor in any configuration and condition he and his buyers came across. That was in the 60's and early 70's.

I don't know what his goal was, but the Company and he had accumulated a huge number of them plus parts.

Maybe he was going to be one that finally did what we all had wished we had done.
That was to...Buy a R/R car full of those $20 rifles when they were still $20.

Don't know if the DGW Co ever sold them off later on or what happened to them. Kirkland died in the mid to late 90's.
I think his son took over the company.
Reply With Quote
  #26  
Old 12-21-2020, 12:07 PM
sandog's Avatar
sandog sandog is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Sep 2016
Location: Arizona
Posts: 737
Likes: 1,531
Liked 1,328 Times in 456 Posts
Default

I've long reloaded for .45/70 as I've hunted with Marlin 1895s for decades.
When I was a teenager I lusted for an H&R Officer's Model Trapdoor.

Friends of mine have the Uberti and Browning 1885 Hi Walls in .45/70, I like that design. No big hammer to swing or have to cock.

The only single shot I've owned was this beautiful Shiloh Sharps that I got for a good price because someone had chopped the barrel to 18".
At the time I lived near Shiloh's Big Timber Montana shop and I contacted them about putting a longer barrel back on it.
Price quoted was reasonable, $250, but before I got around to that I ended up selling it when I needed to buy a new pickup.
__________________
U. S. Army Veteran
Reply With Quote
The Following 3 Users Like Post:
  #27  
Old 12-21-2020, 12:18 PM
deadin's Avatar
deadin deadin is offline
US Veteran
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Nov 2004
Location: Ocean Shores, WA, USA
Posts: 5,775
Likes: 201
Liked 5,063 Times in 1,767 Posts
Default

I have a mold for the 265 gr Hollow Base .455 Webley bullet.
Anybody ever try these?? They have an exceptionally long ogive so might not be too stable in a rifle or carbine.
__________________
Dean
SWCA #680 SWHF #446
Reply With Quote
  #28  
Old 12-21-2020, 12:36 PM
sureshotbob sureshotbob is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Sep 2007
Location: western Connecticut
Posts: 1,815
Likes: 13,079
Liked 2,901 Times in 932 Posts
Default

I had a H&R trap door carbine with the old Lyman reloading book with a starting load of IMR 3031 and a cast 405 gr. it was a pleasure to shoot.

When I first got it used it did pop open a few times I took it back and the gun shop they had there smith relieve a bit of the stock under the hammer an the carbine was great after that.
Reply With Quote
The Following User Likes This Post:
  #29  
Old 12-21-2020, 12:54 PM
Old Corp's Avatar
Old Corp Old Corp is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Feb 2009
Location: Coastal NC
Posts: 2,936
Likes: 2,338
Liked 4,673 Times in 1,599 Posts
Default

Long ago as a young teen a family friend gave me 'some old gun' found in one of her rental houses and gave it to me.
It was an 1884 Springfield Trapdoor rifle.
Recall buying the first box of factory ammo for it - Peters brand 405 gr. SP, but was expensive for me - ~$7-$8/box!

Shortly after, I began to devour Dixie Gun Works catalogs and the short articles therein. One article was about simple reloading minus any real tools.
Taking my small collection of empty .45-70 cases, I set about following the article's methods.
Wooden block with proper hole drilled into it, and ice pick and small mallet - deprimed.

Wood dowel and upturned new primer on wood block, carefully smack case down until primer seated.

Measure and insert 2 or 3 FG black powder, usually 50-60 gr.
A plastic .45 cal. wad ('PolyPatch', IIRC), concave on each end with a .457" round ball, seated so it was in contact with the powder.
Seal with a dab of Elmers.

Cheap, easy and fun for a kid - allowed me to shoot my neat old rifle.
Accuracy was sort of lackluster, but the belch and smoke of BP was addictive and recoil almost nil.

Later on, I continued the same loading method, but had switched to the new, space age Pyrodex RS, which made cleaning much easier.

Good memories. Still have that old warhorse. Would love to know where it'd been.
__________________
Ret'd LEO
SWCA #2275

Last edited by Old Corp; 12-25-2020 at 10:57 AM.
Reply With Quote
The Following 5 Users Like Post:
  #30  
Old 12-21-2020, 01:14 PM
deadin's Avatar
deadin deadin is offline
US Veteran
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Nov 2004
Location: Ocean Shores, WA, USA
Posts: 5,775
Likes: 201
Liked 5,063 Times in 1,767 Posts
Default

My first trapdoor was a full rifle and I was about 15 YO or so. I had a Lyman 310 tong tool for loading and used black powder nd don't remember what bullets. (something available at the LGS).


I was complaining about how hard it was to not only close the handles, but even harder to get them open again when sizing the case. When I was asked what kind of lube I was using, my answer was "Lube??"
__________________
Dean
SWCA #680 SWHF #446
Reply With Quote
The Following 4 Users Like Post:
  #31  
Old 12-24-2020, 05:41 PM
jag312's Avatar
jag312 jag312 is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jun 2008
Location: Minden, Nevada
Posts: 3,627
Likes: 2,014
Liked 5,295 Times in 1,736 Posts
Default

Quote:
Originally Posted by Ivan the Butcher View Post
A couple of hints: On H&R trapdoors You want one with a Serial number below 5000. Higher than that are post Bicentennial production, and quality fell quite a bit. A friend has a H&R Officers model in the 300 range, it is as accurate as my Shiloh Sharps!

Tip Two: with all the rifles cut down into carbines a few pointers on how to tell an original. The but plate has no trap door in it and the stock below the butt plate is not drilled! When you cock the hammer, only a real carbine action has 3 clicks to it.

When dating an action, only 4 carbines were made in 1876 (mine and 3 others) so the odds are your 1876 carbine is a fake. (has to do with "Pre Custer" carbines bring a premium.) There were a number of 1870 model carbines at the Little Big Horn, but they were ALL firing at Custer!, so it needs to be a 1873 Model in 45-70, not 50 Carbine! (I have a "Parts" rolling block in 50 Carbine, that is the most fun you can have with a Black Powder cartridge gun! 425 grain bullet and 50 grains FFg. Recoil is very very mild)

NRA condition rules are very loose on antiques, but cavalry carbines and revolvers are suppose to be rough! Mine is a beauty with 5% blue left! If it looks to good to be true, IT IS!

Ivan

Another way to determine if the barrel an authentic carbine barrel or a cut-down rifle barrel is to mike the outside diameter. An authentic carbine barrel measures 0.725 inch, and a cut-down rifle barrel will measure 0.775 inch. The carbine barrel had a faster taper than the rifle barrel.
Reply With Quote
  #32  
Old 12-24-2020, 06:10 PM
jag312's Avatar
jag312 jag312 is offline
Member
Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R Trapdoor H&R  
Join Date: Jun 2008
Location: Minden, Nevada
Posts: 3,627
Likes: 2,014
Liked 5,295 Times in 1,736 Posts
Default

I enjoy shooting the trapdoor carbine. I have several originals, but I only shoot one. It has all the original correct carbine parts, except the barrel is a cut down rifle barrel. I load my own cartridges; 55 grains FFg black powder, some Cream of Wheat filler, and Lee 405 grain hollow base lead bullets lubed with SPG. The carbine speaks with authority. The recoil isn't bad at all. Whenever I take it to the range, there will always be some other shooters that will ask to give it a try. I just wish they would come home with me to help me clean the carbine.

I have several carbines with documentation. One was made in 1880, and after hard use on the frontier was shipped back to Springfield for repairs and upgrading. On March 14, 1888 it was part of a shipment of carbines to Troop L of the 7th Cavalry. In September 1890, Troops L and M were disbanded, and the officers and men were merged into other troops to bring up the numbers. It is almost certain that this carbine was at Wounded Knee and at The Bloody Pocket near Drexell Mission.

Last edited by jag312; 12-24-2020 at 06:12 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trapdoor Springfields? JayFramer Firearms & Knives: Other Brands & General Gun Topics 74 02-01-2019 09:26 PM
Any trapdoor experts? chiefdave Firearms & Knives: Other Brands & General Gun Topics 7 12-19-2018 09:19 AM
Anybody have a Trapdoor Springfield? alde Firearms & Knives: Other Brands & General Gun Topics 60 10-11-2014 04:31 PM
Those Trapdoor Springfields! PALADIN85020 The Lounge 13 06-21-2013 08:25 AM
Trapdoor sporters - anyone still use one? GatorFarmer The Lounge 9 09-24-2012 04:17 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 05:51 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)