Kershaw or CRKT
I carry one everyday , but I’ve also broken a couple over the years from hard use/abuse
I think any brand will fail if pushed , so just get one that feels good to you and go with it

__________________
the rules? there are no rules

Have had the fancy benchmades, spyderco, al mar, etc.

Nothing beats a BUCK for plain old quality and utility.

__________________
aka "Mooncat"

Knives and holsters in the same space? Is that natural?
Careful you don't get your drawers in a twist.

I most often carry a spyderco Endura 4 wave...it is lite and sharp, stays sharp, sharpens well when needed, has the tough zytel or hard plastic handle - but this one has metal liners inside so it's rigid...the pocket clip stays sturdy so it doesn't slip out, and after getting used to the blade deploying hook-it will come out of the poct opened quick as a switch...4" blade is good vg-10 steel...I also have carried a benchmade barrage 580 assisted opener, 154 steel acts like the spederco, sharp, stays sharp and sharpens great when touch up is needed...have a couple zt knives, both very sturdy and thick blades, I measure them up to a Chrise Reeves Sebenza that I own, yet the ZTs' are half the cost of the CRK and I carry them less because they are over $200 each and the 1st two I mentioned are great quality work inives that you can easily press into defense mode....I don't know that I would do that for myself as I usually have a heavy hand tool around diring my work day

Benchmade Mini- Griptilian is what I carry everyday. Its light, smaller sized, stays sharp. I put some red para cord in the lanyard hole helps me to keep track of it sad- I have lost some good pocket knives.

New Benchmade Mini Griptilian Knife with G10 Handles and Better Blade

Here is a review of the Mini Grip- Bench made makes different versions of it its a good choice imo.

https://pics.knifecenter.com/fit-in/...s/10100sbp.jpg

Benchmade is a great company there knives are first rate- I also have a Benchmade "LFK" that I like a lot- don't use it as a EDC knife though-its to big for that.

The Buck 110 is classic can't go wrong with that- but its heavy for pocket carry and no clip for IWB carry.

I keep mine in a top chest of a roll around toolbox.

__________________
Take it easy. Chris

Still lookin at the Sog Trident A2 with D-2 steel and glass breaker. Beefed up locking mechanism plus 3.75 inch blade.

Well I´ve never tried to split a coconut with and probably never will.So in this matter I can´t opine , but in the concealment issue I can offer this: In these past times no one ever saw me carrying that blade.The reason is the way carry it. Inside my pants or shorts with the clip covered by the belt, not in the pocket with the clip in full view.
I can assure you that by carrying that way nobody will see a thing unless you want to show it.
Regards, Ray

Buck 110’s or 112’s. Yeah I Like Em😃

Attached Thumbnails

 

I have been very happy with the Kershaw assisted opening knives. About as quick and easy to open as a switchblade but no legal issues. I have bought 3, two for me(lost one) the other for my son. His friends at college in NROTC were impressed by it too and became owners. Good steel, reversible pocket clip (hate the ones that hold the knife the "wrong" way on your pocked. Totally reliable mechanism

An observation-- the more expensive the knife, the greater the odds of losing it. The bigger the knife, the more time it will spend in a drawer

I lost interest in Benchmade products when they willingly destroyed evidence firearms.

Too many other excellent choices out there.

Randy

If you want a knife that you'll be proud to own, will be extremely easy to maintain and take apart, will have fantastic edge durability, and has a great customer support system behind it, I can recommend two. These will run you a bit over $400 apiece, but they will last the rest of your life and your kids' lives.

Chris Reeve Sebenza (This particular one is S35VN blade steel and the "Insingo" grind)

Rick Hinderer XM-18 (This one is S45VN and the "spanto" grind.)

You can't go wrong with either one. They are ultra smooth, have great actions, and extremely fine fit, finish, and tolerances, just like a vintage S&W revolver:

Attached Thumbnails

     

CRKT=after years of trial and error.

A CRK Insingo is on my "if I win the lottery" wishlist.

Spyderco! A delica or an endura are reasonably priced, sharp as the dickens, and will last forever.

as far as the losing, the same goes for sun glasses

Being tools I regularly maltreat, a quartet of Spyderco Delicas and Kershaw flippers serve all my needs, no biggie if they go through the wash with the various pants they live in. And not fussy edges, few minutes with the Spyderco Tri keeps them slicing and dicing.

Buck 110,great company and product support.

__________________
SWCA#2288
SWHF#407

Chris Reeves, pricey, but when only the best will do.
I have three, two of them with Damascus blades.
Check them out at their website.

I just bought a CRKT M4-02S so far so good and a beautiful knife.

I like the Buck 112 "light" less bulky and more rounded edges than the 112 Ranger but equipped with thumbstuds for easy one handed opening. Easy to keep sharp and a good lock to keep it from closing on your finger.
Steve W

Benchmade.

Griptilian Model, in particular.
Multiple blade styles, two different sizes.

I have lots of knives. Benchmade, Buck, Kershaws, etc. I’ve become a big fan of Kershaw. My EDC is a Kershaw Launch 7 auto. It keeps a great edge.

Fun thread. Truth is, there are many wonderful, high quality pocket knives. Why stop at one? Treat yourself, now and then, to a new one.

I have several of the knives mentioned here. Like 'em all. Few of us here stop at one gun. Why stop at one EDC knife?

As others have noted, "quality knife" can mean different things to different people, but here is one of my favorite quality knives, made by the famous Swiss Army knife company, Victorinox. This model is called the Waiter:



A great example of everything ya need and nothing ya don't. So light and thin, can't even feel it in your pocket until your fingers search for it. $17 bucks. Blade is big enough to be useful for most tasks. Along with Opinel, the best bargain in a quality knife I have come across. I like 'em so much I buy extras in case I lose one to TSA or carelessness, or just feel like giving one away.

You're just not doing it right, hairy.

Lots of good suggestions here.

I've got mainly Spyderco's, Benchmade's, Case, and a few SOG knives. Of these manufacturers I'd say Spyderco has the the most models with different steel. I think a good middle of the road steel is CPM S30V; lots of makers use it.

Before you make a decision, check out knife laws where you live/go, figure out what you'll use the knife for, whether rust or corrosion will be a problem where you live, (or whether you sweat battery acid,) whether you want to buy a sharpener and keep it sharpened yourself, etc.

Folks here have mentioned many brands that can be just what you're looking for. The possibilities are endless.

Trying them all is part of the fun.

Benchmade may have discontinued the CLA. I picked one up just like yours last month when they suddenly went on sale for 30% off at a local brick and mortar store. I've looked around on the Internet to see if they've really been discontinued, but I'm finding mixed info.

Thank you everyone for all of the excellent suggestions!
After looking into the makers that I wasn't familiar with, just to be thorough, I have decided to buy a Benchmade Bugout for edc, and a Buck 110 to carry when the edc is out for sharpening.

Who knows....in time I could get the "bug" like some of you have, and expand my purchases. Only time will tell.

__________________
Stay protected my friends.

You might have just as well asked "What's Your Favorite Knife?" because that's really the answers you're getting.

I don't have a big box of knives. I own five pocket knives, two of them are twenty plus years old.

I have a Buck 110 that I bought in 1995(ish)
I have a Schrade L7 that I bought in 2000(ish)
I have a CRKT Ignitor that I bought about 5 years ago
I have a Buck 110 Slimline that I bought last year
I have a Benchmade 710 that was gifted to me last year.

Of the five only the CRKT is an assisted open knife but it's a Righthand knife so I haven't carried it for several years. It's a good thirty dollar knife if you're right handed.

The Schrade is a Buck 110 built by another company. It's not assisted open but I put a Kwik Stud on it and I can open it one handed.

The Buck 110 Slimline is an updated Buck 110 pocket clip knife. It can be carried right hand or left. It has a thumb stud and can be opened reasonably easy with either hand but it's not an assisted opener.

The Benchmade 710 is ambidextrous as well and opens much more smoothly than any other knife I own. It was the first Axislock knife Benchmade ever made. I carry it every night at work, more to honor the friend who gave it to me than anything else but it's also becoming my go to knife to carry off the clock too.

My Buck 110 is the knife I've owned the longest. It's the utility knife I use the most. I carry it at work nightly as well and I reach for it more often than the Benchmade. It's not an assisted opener but I put a Kwik Stud on it as well and I can open it one handed with either hand if I need to. Most of the time I just open it.

Of the five the Buck 110 is my go to utility knife. I suspect it's the one I'd carry daily off the clock if I didn't carry it daily on the clock.

just get yourself a Barlow style. That's all you need. Brand is not important.

The Buck 110 is a "belt knife" for me. Put it in your front pocket and the ladies will think you are glad to see them. The Benchmade "MiniGriptilian" clips nicely into the "watchpocket of your jeans and has a tight, "pocket shredder" clip, so you don't lose it easily. Joe

__________________
Trudging the Road of Happy

This is a Buck 110 Slim Select



It makes the 110 a viable pocket knife. The original 110 is 8 ounces the Slim is just under three.

The blade is a 110 blade but with a satin finish instead of the polished finish. The scales are Micarta. I like the textured grip. I've heard a couple of people say the clip is ugly and too short but I haven't noticed. I do like that it carries the knife low in your pocket.

It's a good all around utility knife

I have a few quality folding knives, like benchmade, spyderco, zero tolerance etc.

This is what I'm currently carrying. I really like it. The knife blade came scary sharp, and the saw has been used several times and was indispensable when I needed it. Picked it up on sale for around $60.

A tactical knife might be better for perforating a commie, but that need occurs so rarely around here that I feel better served with this.



KCUG - YouTube

Attached Thumbnails

 

I think lots more of the few knives that I have than the box of holsters that is downstairs in storage.

Have a blessed day,

Leon

One of the reasons I love this forum. Noticed a blank spot in the knife menagerie, and this is one cool looking utility. Did a quick bunch of research on the thing, and it’s a real Victorinox, originally named the Soldier, but given a paint job and some blackened blades, became the Knife, Combat Utility, Government. I’ve got one ordered, and I imagine it’ll be my new Jeep console knife. Sadly, I paid more than you did. . .

__________________
Wisdom comes thru fear . . .

My Knife, Combat Utility, Government showed up today. Bigger than it looks in the pics, but still everything I thought it would be. Gonna have a home on the plate carrier . . .

__________________
Wisdom comes thru fear . . .

Early on in my career, before departing for my first overseas tour, I purchased an Ernie Emerson CQC-7. In a couple of years I will be retiring. That knife still rides in my pocket everyday and has been a real world traveler. It would be worth your time to check out Ernie's blades.
Emerson Knives Inc. | Official Website | Shop Now

I have a Buck Lite I bought in the early eighties when first introduced, also a Buck 110. For pocket carry a Case xx stockman style knife.

__________________
Kevin in Oregon