Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >

The Lounge A Catch-All Area for non-gun topics that donít fit elsewhere. Keep it Family Friendly. See The Rules for Banned Topics!
Put gun topics in the gun forums.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-09-2010, 03:36 PM
qennis's Avatar
qennis qennis is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Jan 2010
Posts: 187
Likes: 0
Liked 1 Time in 1 Post
Default home made!!!gun safe lighting system

here is a lighting system that I installed in my browning safe.
It works better than anything that I have seen for sale and cost way less.

If you want to install one in your safe, this is what I used:

(2) 18 ft sets of rope lights...get them from wal-mart $8 each
(1) motion detecting light switch $15 at wal-mart
total cost= less than $35...you can't beat that, and it looks great.

I ran all the wirers through 1/2" pvc pipe (i had laying around)to clean up the loose wires.
now when i start to open the door the light comes on automatically.

If you would like to add this to your safe let me know and I would be glad to help any way I can.

Last edited by qennis; 02-24-2010 at 11:19 PM.
Reply With Quote
The Following User Likes This Post:
  #2  
Old 02-09-2010, 04:11 PM
james56's Avatar
james56 james56 is offline
US Veteran
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: May 2009
Location: Sebastian, Fl
Posts: 1,029
Likes: 794
Liked 194 Times in 121 Posts
Default

nice idea! Why 2ea. 18ft rope lights would one be enough? Where do you place the motion detector? Was thinking of doing lights also. I didnt have it figured out yet. I didnt see the pvc in there must have hidden it good.
thanks
james
Reply With Quote
  #3  
Old 02-09-2010, 04:44 PM
target tech's Avatar
target tech target tech is offline
Member
home made!!!gun safe lighting system  
Join Date: Sep 2006
Location: North Central, WV
Posts: 340
Likes: 0
Liked 397 Times in 92 Posts
Default

I used the same light rope, looped back and forth on both sides of my safe. For a switch though, I used a standby compass light switch for a Douglass DC-10, mounted on a "homemade" bracket......7075-T6 extrusion.....and wired it all in with some 18ga twisted pair milspec wire. When I worked for the Evil Empire, it did have its advantages. But alas, now they are gone.
Reply With Quote
  #4  
Old 02-09-2010, 04:52 PM
qennis's Avatar
qennis qennis is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Jan 2010
Posts: 187
Likes: 0
Liked 1 Time in 1 Post
Default

the motion detector is at the top of the bottom shelf...I put in 2 sets of lights because one set was not bright enough for my liking...the pvc runs from the front bottom left to the back, you cant see it because it is not in the pic...the picture is poor i am tring to figure out how to take a better picture

By the way I used the little things that you zip tie cords to, they have very strong double sided tape that comes on them.

I also wired my dry rod into this so that it stays on all the time and installed a thermometer/hygrometer it keep an eye on the temp and humidity...it stays a constant 68 degrees in there with anout 40% humidity
Reply With Quote
  #5  
Old 02-09-2010, 09:17 PM
84CJ's Avatar
84CJ 84CJ is offline
US Veteran
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Feb 2009
Location: Upstate SC
Posts: 1,022
Likes: 1
Liked 19 Times in 10 Posts
Default

Your Golden Rod or dry rod should stay on 24 7 to work properly.
__________________
SC Army National Guard
Reply With Quote
  #6  
Old 02-09-2010, 11:39 PM
m657's Avatar
m657 m657 is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Jan 2008
Location: sunny Orygun
Posts: 2,883
Likes: 324
Liked 276 Times in 178 Posts
Default

so the inside power source is gang plugged into the heat rod? By what kind of adapter? I'm concerned of overheating, etc.
__________________
Dum vivimus Vivamas
Reply With Quote
  #7  
Old 02-10-2010, 10:28 AM
Rule3's Avatar
Rule3 Rule3 is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Feb 2008
Location: Florida, NRA CERT RSO
Posts: 20,743
Likes: 9,409
Liked 13,102 Times in 5,957 Posts
Default

How do you get the power cord from the outlet into the safe?
Drill a hole in the safe?????
__________________
For office use only
Reply With Quote
  #8  
Old 02-10-2010, 11:31 AM
qennis's Avatar
qennis qennis is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Jan 2010
Posts: 187
Likes: 0
Liked 1 Time in 1 Post
Default

Quote:
Originally Posted by 84CJ View Post
Your Golden Rod or dry rod should stay on 24 7 to work properly.
the golden rod does stay on 24-7; I wired it straight to the the power cord, before the motion detector
Reply With Quote
  #9  
Old 02-10-2010, 11:48 AM
qennis's Avatar
qennis qennis is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Jan 2010
Posts: 187
Likes: 0
Liked 1 Time in 1 Post
Default

Quote:
Originally Posted by m657 View Post
so the inside power source is gang plugged into the heat rod? By what kind of adapter? I'm concerned of overheating, etc.
I used an older heavy duty extension cord that I cut the end off. It wont over eat because it is not drawing that many amps (only about 6 amps)
I ran the through the hole in the back of the safe.
I cut the plug off of one set of rope lights and wired it to the motion switch, then attached the other end of the rope lights to the other set of rope lights to make one long strand.

To clean up the the cords I and make things look neat I ran them through 1/2" pvc...I will try to post better pictures.

Last edited by qennis; 02-10-2010 at 11:50 AM.
Reply With Quote
  #10  
Old 02-10-2010, 11:52 AM
qennis's Avatar
qennis qennis is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Jan 2010
Posts: 187
Likes: 0
Liked 1 Time in 1 Post
Default

Quote:
Originally Posted by OCD1 View Post
How do you get the power cord from the outlet into the safe?
Drill a hole in the safe?????
My safe came with a small hole in the back to run a power cord for a dry rod.
Reply With Quote
  #11  
Old 02-10-2010, 01:00 PM
ncy54 ncy54 is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Oct 2005
Location: Jackson, New Jersey
Posts: 173
Likes: 0
Liked 1 Time in 1 Post
Default

Nice set up, but you need more handguns. There's still some room in there....
__________________
NCY in the PR of NJ
Reply With Quote
  #12  
Old 02-10-2010, 04:02 PM
sigp220.45's Avatar
sigp220.45 sigp220.45 is online now
US Veteran
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Dec 2005
Location: Colorado
Posts: 5,572
Likes: 17,441
Liked 18,737 Times in 3,029 Posts
Default

Thanks, gennis - you've inspired me to give it a try. If I burn my house down it'll be my own damn fault.
__________________
Ramblers - lets get rambliní.
Reply With Quote
  #13  
Old 02-10-2010, 05:19 PM
flagman1776's Avatar
flagman1776 flagman1776 is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Oct 2009
Location: Rhode Island
Posts: 1,840
Likes: 1,882
Liked 1,436 Times in 596 Posts
Default

I used a used aquarium lamp with a reflector in the top of my Browning safe... ran power through the hole & threaded a cable clamp in there. I assembed a 2 outlet box inside the safe.
I also have a safe-safe with no hole... I am stymied at getting power in there. I want to build drawers in there with slide out hardware.
Russ
Reply With Quote
  #14  
Old 02-10-2010, 05:30 PM
cobra44 cobra44 is offline
Member
 
Join Date: Feb 2007
Posts: 958
Likes: 1
Liked 69 Times in 40 Posts
Default

I like it. I am going to try something like that.
Question is - like a frig, how do you know the light goes off when you shut the door?
Reply With Quote
  #15  
Old 02-10-2010, 05:31 PM
james56's Avatar
james56 james56 is offline
US Veteran
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: May 2009
Location: Sebastian, Fl
Posts: 1,029
Likes: 794
Liked 194 Times in 121 Posts
Default

do you have a soruce for hard ware and draw's or plans Ive got all kinds of wood working equipment Ive picked up in garage sales all around here now I need some inspriration to do some projects like what your talking about. Help!!! lol I have too much time on my hands

Quote:
Originally Posted by flagman1776 View Post
I used a used aquarium lamp with a reflector in the top of my Browning safe... ran power through the hole & threaded a cable clamp in there. I assembed a 2 outlet box inside the safe.
I also have a safe-safe with no hole... I am stymied at getting power in there. I want to build drawers in there with slide out hardware.
Russ
Reply With Quote
  #16  
Old 02-10-2010, 05:49 PM
whitecoyote's Avatar
whitecoyote whitecoyote is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Dec 2006
Location: MI
Posts: 1,526
Likes: 29
Liked 1,013 Times in 232 Posts
Lightbulb

Quote:
Originally Posted by m657 View Post
so the inside power source is gang plugged into the heat rod? By what kind of adapter? I'm concerned of overheating, etc.
Well hopefully you have a fire-proof safe.
That way the fire will stay contained within the safe!
__________________
ΜΟΛΩΝ ΛΑΒΕ
Reply With Quote
  #17  
Old 03-23-2010, 07:42 PM
DaveB57's Avatar
DaveB57 DaveB57 is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Feb 2009
Location: Coeur díAlene, ID
Posts: 238
Likes: 9
Liked 12 Times in 8 Posts
Default Thanks for the Idea...

Just finished my simple little rope lighting installation...I have a small safe that I keep in a dark closet & been struggling to see without flashlight. Added a switched single gang outlet above the safe w\ 4' grounded extension cord feeding a 9' length of LED rope light...installed in an upside down U-Shape just behind door frame. I do not like to look at the light, just wanted to "cast" the light @ the contents. May not show up well in this picture, but works absolutely perfect for about $50.

Reply With Quote
  #18  
Old 03-23-2010, 09:23 PM
max's Avatar
max max is offline
US Veteran
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Mar 2001
Location: illinois
Posts: 4,995
Likes: 1,000
Liked 3,892 Times in 1,279 Posts
Default

I did something similar about 15 years ago. I ran my cord through the hole in the back of the safe. I didn't use a switch, I just plug it in when I open the door.
Reply With Quote
  #19  
Old 03-23-2010, 11:53 PM
Snapping Twig's Avatar
Snapping Twig Snapping Twig is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: May 2007
Location: S.F. Bay Area
Posts: 3,399
Likes: 474
Liked 3,489 Times in 1,157 Posts
Default

I mounted some velcro on the inside of the door and attached a battery operated push type light and a flourescent.

Batteries last a long time and these lights have an auto shut-off should you forget and leave them on.
Reply With Quote
  #20  
Old 03-24-2017, 05:35 PM
rnj1950 rnj1950 is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Mar 2017
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

I just saw your post and would to see some pics. I just purchased my safe and need to add some lighting but haven't seen anything I really like that isn't sky high. My email is rnj1@hotmail.com. Any pics, shopping lists, etc would be appreciated. Thanks
Reply With Quote
  #21  
Old 03-24-2017, 08:05 PM
joe44va's Avatar
joe44va joe44va is offline
SWCA Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Oct 2014
Location: Central VA
Posts: 2,128
Likes: 3,230
Liked 3,680 Times in 1,291 Posts
Default

I keep a Maglite on top of the safe.
__________________
Trying doesn't count.
Reply With Quote
  #22  
Old 03-24-2017, 10:01 PM
loutent's Avatar
loutent loutent is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Dec 2009
Location: Del Aware
Posts: 1,229
Likes: 524
Liked 1,037 Times in 303 Posts
Default

Quote:
Originally Posted by rnj1950 View Post
I just saw your post and would to see some pics. I just purchased my safe and need to add some lighting but haven't seen anything I really like that isn't sky high. My email is rnj1@hotmail.com. Any pics, shopping lists, etc would be appreciated. Thanks
I wrapped some LED's around the inside front with a switch inside - this was a few years ago when LED's were pricey - it has worked out pretty well - just wish I had bought a bigger safe .

__________________
Lou
Reply With Quote
  #23  
Old 03-24-2017, 10:05 PM
Abbynormal's Avatar
Abbynormal Abbynormal is offline
Member
home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system home made!!!gun safe lighting system  
Join Date: Jan 2007
Location: Indianapolis
Posts: 1,336
Likes: 1,110
Liked 1,576 Times in 651 Posts
Default

Quote:
Originally Posted by qennis View Post
here is a lighting system that I installed in my browning safe.
It works better than anything that I have seen for sale and cost way less.

If you want to install one in your safe, this is what I used:

(2) 18 ft sets of rope lights...get them from wal-mart $8 each
(1) motion detecting light switch $15 at wal-mart
total cost= less than $35...you can't beat that, and it looks great.

I ran all the wirers through 1/2" pvc pipe (i had laying around)to clean up the loose wires.
now when i start to open the door the light comes on automatically.

If you would like to add this to your safe let me know and I would be glad to help any way I can.

Enjoy using 30 year old technology! Welcome to 1991!
Reply With Quote
Reply

Tags
browning, milspec

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Safe Lighting apstang50 The Lounge 12 04-05-2016 09:21 PM
Interior lighting & home defense bigride Concealed Carry & Self Defense 10 05-20-2014 03:06 PM
Home Security System 24jeepn The Lounge 16 06-28-2012 10:24 PM
home security system hugo The Lounge 12 04-21-2010 11:12 AM
Home Security System Mr. Tree The Lounge 20 04-11-2009 09:06 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 11:38 AM.


Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)