Smith & Wesson Forum

Go Back   Smith & Wesson Forum > General Topics > The Lounge
o

Notices

The Lounge A Catch-All Area for NON-GUN topics.
PUT GUN TOPICS in the GUN FORUMS.
Keep it Family Friendly. See The Rules for Banned Topics!


Reply
 
Thread Tools Display Modes
  #1  
Old 08-17-2015, 08:11 AM
WI357SIG WI357SIG is offline
Member
Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner  
Join Date: Apr 2012
Location: Wisconsin
Posts: 63
Likes: 258
Liked 33 Times in 22 Posts
Default Non-chlorinated brake cleaner

Was at the range recently and struck up a conversation with a couple guys who were doing long range rifle shooting. They were occasionally cleaning the barrel on their rifles. They were touting the benefits of using non-chlorinated brake cleaner. They would then shoot the barrel “dry”. I mentioned that some schools of thought recommend a small amount of lube. They felt it took a couple rounds to clear the oil and it impacted accuracy.

I see frequent discussion here on cleaning products and what works best. I have never seen non-chlorinated brake cleaner mentioned.

Has anyone used this product to clean a barrel?
Reply With Quote
  #2  
Old 08-17-2015, 08:38 AM
da gimp da gimp is offline
Member
Non-chlorinated brake cleaner Non-chlorinated brake cleaner  
Join Date: Mar 2009
Location: mid Missouri
Posts: 1,871
Likes: 9,407
Liked 2,560 Times in 1,010 Posts
Default

I suspect that it is because in construction, our pipe fitters/plumbers always stressed to never allow any product containing bleach/chlorine to come into contact with any plumbing fitting or line made of stainless steel... as it can & will play havoc with it. Even such little amounts as are found in some dish detergents can do damage....

We mix common dish detergent & water and use it in a spray bottle to find leaks in natural gas/propane fittings/lines etc when assembling them. If you are using the good stainless braided lines or stainless tubing /pipes to plumb with, the chlorine in some detergents can eat into it...I always tell my lady to never buy any dish detergent with any chlorine/bleach in them...

They might be worried about the chlorine affecting stainless barrels, receivers or parts. This is the only thing I can come up with. Hope this helps you.
__________________
be safe,enjoylife,journey well
Reply With Quote
  #3  
Old 08-17-2015, 10:01 AM
H Richard's Avatar
H Richard H Richard is offline
US Veteran
Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner  
Join Date: Aug 2006
Location: West Central IL
Posts: 22,758
Likes: 18,437
Liked 22,313 Times in 8,245 Posts
Default

I use the brake/parts cleaner to clean actions and parts, but not for barrels. Leaving the barrels totally dry, that cleaner removes all lube, could make them more susceptible to copper fouling or leading. On my rifles I store them with a wipe of lube in the bore, but run a patch through it to wipe out excessive amounts before shooting, then shoot at least 1 round to foul the barrel before shooting for score.
__________________
H Richard
SWCA1967 SWHF244
Reply With Quote
  #4  
Old 08-17-2015, 10:52 AM
e3mrk e3mrk is offline
Member
Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner  
Join Date: Sep 2014
Location: Ohio
Posts: 1,567
Likes: 93
Liked 2,685 Times in 897 Posts
Default

When I was a Mechanic I sprayed some regular Brake Cleaner on a plastic part and actually watched it disintegrate before My Eyes.
I only use Non-Chlorinated Brake Cleaner now for everything from Brakes to cleaning My Firearms.
Reply With Quote
  #5  
Old 08-18-2015, 12:29 AM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner  
Join Date: Feb 2008
Location: Florida
Posts: 22,065
Likes: 10,777
Liked 15,467 Times in 6,788 Posts
Default

Non Chlorinated is highly Flammable It contains Acetone, Toluene and Methanol.

Chlorinated contains TCE a very good solvent but both need to be used in a well ventilated area.

Good for de greasing but as mentioned will strip any lube off the metal parts, Acetone is not good for plastic guns.

Neither one is good for your eyes (wear safety glasses!)
__________________
Still Running Against the Wind
Reply With Quote
  #6  
Old 08-18-2015, 12:52 AM
Badquaker's Avatar
Badquaker Badquaker is offline
Member
Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner Non-chlorinated brake cleaner  
Join Date: Mar 2012
Location: West Houston, Texas
Posts: 779
Likes: 14
Liked 811 Times in 313 Posts
Default

I use it as a final rinse after scrubbing with solvent.
Reply With Quote
The Following User Likes This Post:
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
"Non Clorinated" brake cleaner ginzo S&W Revolvers: 1980 to the Present 1 02-11-2015 10:18 PM
Has anyone used this M-Pro 7 Gun Cleaner? revolver59 The Lounge 17 05-06-2014 06:02 PM
Brake cleaner & composite ? to9 The Lounge 8 02-23-2012 01:26 PM
Cleaning guns with brake cleaner? HAWKEYE10 The Lounge 23 10-05-2011 08:44 PM
Can I use carb or brake cleaner to blast my 642?(read at post 12 broken hammer stud yanici S&W-Smithing 29 05-11-2009 10:48 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 11:53 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)