I recently bought a project gun, a High Standard 106 Trophy Hamden gun. I always wanted a military grip Hamden gun to go with my slant gripped 102 series citation. The one I just bought has its issues because it was modified for competition. I would like to bring the gun back to how it was when it left the factory (minus a refinish, I just want the original parts) because I like high standards. I need the following parts:

Barrel - must be the button takedown/release type. Must also be marked Hamden Conn. I would take either a 7 1/4 fluted barrel or the 5.5 bull but I would prefer a 7 1/4 fluted. I also would like a barrel with the front sight. I know Numrich and Brownells carry them but Numrich parts don't appear to be finished and the barrels don't come with a sight. Also, I need a Hamden marked barrel because the gun is a hamden gun. The barrel also needs to have at least most of the finish remaining.

Slide - someone milled down the slide on my trophy. I don't know why they changed the contour, I assume because the barrel has a mount and the slide was too high for their sight on the mount. The slide needs to be for a 106 military grip gun.

Rear sight - Someone removed the entire rear sight assembly. The sight would need to be a 106 or 107 series sight. I don't particulary want a sight from an East Hartford gun because I'm pretty sure they were different.

Magazine release - my button which is supposed to be gold has either worn over time or it was for a Citation because its very dull.

I also could be interested in weights, compensated barrels, FACTORY magazines or any other accessories. I also would consider an offer on an entire 22 auto gun (not for parts, just to buy another one) but it must be of either New Haven (the old ones) or Hamden Conn manufacture. I am not interested in any East Hartford guns other than possibly a 10x. 10xs were not made at Hamden so I would consider a 10x.

Either PM me or call Jim at 724 825 2397